XIM Community

XIM NEXUS [Controller Firmware 20220220]  (Read 6950 times)

Offline OBsIV

  • Administrator
  • MVP
  • *
  • Posts: 45437
  • It's obsessive.
    • View Profile
    • OBsIV's Blog
XIM NEXUS [Controller Firmware 20220220]
« on: 08:30 PM - 02/20/22 »
XIM NEXUS Controller Firmware

Changes since last update:
● Fix XIM NEXUS Manager intermittent disconnects
● Fix motion engage issues when mapped to non-trigger buttons
● Fix ADS activation delay not being applied when using Aim and Fire motion activation
● Fix aiming curve not working with overlapping control points
● Fix D-Pad diagonals not registering
● Flash memory write frequency reduction (increases flash lifetime)

FEEDBACK: This firmware version contains important device experience fixes. Please upgrade and provide feedback so we can continue to make our products better!

COMPATIBILITY: This version of Controller Firmware works with:
XIM NEXUS Manager version 20211217 (or later)
XIM NEXUS Adapter Firmware version 20211203 (or later)

NOTE: If your browser is failing to download, please right-click on the link and use "Save As".

Download XIM NEXUS Controller Firmware Tool 20220220 for PC
Windows 7/8/8.1/10 x86/x64

Download XIM NEXUS Controller Firmware Tool 20220220 for Mac
macOS 10.11 or higher

Controller Flash Upgrade Instructions:
1. Unplug your Controller from USB
2. If your Controller is on, press and hold Guide until it shuts off
3. Press and hold the P button on the back
4. While continuing to hold P, press Guide to turn your Controller on
5. Wait for your Controller's light to display blue and then release P
6. Plug your Controller into your computer via USB
7. Download and run the XIMNEXUSControllerFlash tool
8. Select Update Firmware
7. Disconnect your Controller from your computer after the tool completes
« Last Edit: 10:25 AM - 05/19/22 by OBsIV »
Get the most out of your XIM NEXUS, read the XIM NEXUS Support FAQ.