XIM Community

XIM4 BETA [Firmware 20211020] [Xbox Series X|S] (**LATEST**)  (Read 1811 times)

Offline OBsIV

  • Administrator
  • MVP
  • *
  • Posts: 41172
  • It's obsessive.
    • View Profile
    • OBsIV's Blog
This BETA firmware:
● Support for Xbox Series X|S controllers on both Xbox Series X|S and Xbox One consoles.
● Adds support for the XIM Universal Games Database system used by all versions of Manager going forward.
● Fixes phantom button presses if a mouse isn't connected (affects users of USB device switches)

Changes since last BETA:
Support for latest Xbox controller firmware updates
NOTE: You may be required to press Guide on your Xbox controller if you don't see the green initialization lights on your XIM after startup. In which case, wait until your devices (i.e. mouse and keyboard) are fully initialized before pressing Guide (otherwise your controller may connect wirelessly to your console).

COMPATIBILITY: This firmware can be used with all versions of XIM4 Manager back to 20160405. However, to add a Config for game designed specifically for a next-gen console, you must be on the latest Beta Manager.

XIM4 Firmware
NOTE: If your browser is failing to download, please right-click on the link and use "Save As".

Download XIM4 Firmware Tool 20211020 for PC
Windows 7/8/8.1/10 x86/x64


Download XIM4 Firmware Tool 20211020 for Mac
macOS 10.11 or higher


Flash Upgrade Instructions:
1. Hold down the button on your XIM4
2. Plug your XIM4 into your computer while continuing to hold the button
3. Wait for your XIM4's light to display blue and then release the button
4. Download and run the XIM4Flash tool
5. Select Update Firmware
6. Disconnect your XIM4 from your computer after the tool completes
Get the most out of your XIM APEX, read the XIM APEX Support FAQ.