XIM Community

XIM APEX BETA [Firmware 20201215] [Xbox Series X/S, PlayStation 5] (**LATEST**)  (Read 92582 times)

Offline kokopinos

  • Member
  • *
  • Posts: 37
    • View Profile
  • PSN ID: Kokopinos
Im using Hori pad mini and if it is connected through the usb hub to the Apex, it will work only if it is connected after Apex is already on. If the pad is on the usb hub when Apex powers on, it will not be recognized, it does not even show up in the manager.

However if the pad is connected directly to Apex without the hub, it will work either way.

Is this intended behavior?

I had the same issue at first but I plugged the apex in first then the gamepad and it fixed it  ;D
So you plug the apex first then the gamepad on the hub to make it work? If yes do you have to do this everytime the console turns on? Do you have to unplug and plug again in the same order everytime?

Offline OBsIV

  • Administrator
  • MVP
  • *
  • Posts: 43992
  • It's obsessive.
    • View Profile
    • OBsIV's Blog
Sounds like we have reports of not working:

Hori Fighting Stick Mini
Nacon Compact Controller

Is that the correct model for the Nacon?
Get the most out of your XIM NEXUS, read the XIM NEXUS Support FAQ.

Offline prototipo13

  • Member
  • *
  • Posts: 153
    • View Profile
yes confirm , the compat nacon controller dont work :(

Offline OBsIV

  • Administrator
  • MVP
  • *
  • Posts: 43992
  • It's obsessive.
    • View Profile
    • OBsIV's Blog
yes confirm , the compat nacon controller dont work :(

Thanks, we will check it out. Sorry about that.
Get the most out of your XIM NEXUS, read the XIM NEXUS Support FAQ.

Offline W11cE

  • MVP
  • *
  • Posts: 1532
    • View Profile
So you plug the apex first then the gamepad on the hub to make it work? If yes do you have to do this everytime the console turns on? Do you have to unplug and plug again in the same order everytime?
Yes, every time Apex powers on. Not sure if it would work without this, if you would keep the xim setup powered on when the console is off.

Offline kokopinos

  • Member
  • *
  • Posts: 37
    • View Profile
  • PSN ID: Kokopinos
So you plug the apex first then the gamepad on the hub to make it work? If yes do you have to do this everytime the console turns on? Do you have to unplug and plug again in the same order everytime?
Yes, every time Apex powers on. Not sure if it would work without this, if you would keep the xim setup powered on when the console is off.
Can you check it real quick? Still waiting for my ps5 to arrive.

Offline YouSillyMoose

  • Member
  • *
  • Posts: 16
    • View Profile
I can confirm that scuff vantage 1 also works. THANKS A TON for your hard work !


Offline mors966

  • Member
  • *
  • Posts: 19
    • View Profile
so for the razer raiju controller that works with the xim beta now?
is is the ultimate edition 2019 or the tournamnet edition or do they both work?

Offline W11cE

  • MVP
  • *
  • Posts: 1532
    • View Profile
So you plug the apex first then the gamepad on the hub to make it work? If yes do you have to do this everytime the console turns on? Do you have to unplug and plug again in the same order everytime?
Yes, every time Apex powers on. Not sure if it would work without this, if you would keep the xim setup powered on when the console is off.
Can you check it real quick? Still waiting for my ps5 to arrive.
Tried now with usb power on in sleep mode and this routine still need to be done after the console turns on.

Offline OBsIV

  • Administrator
  • MVP
  • *
  • Posts: 43992
  • It's obsessive.
    • View Profile
    • OBsIV's Blog
Those having initialization issues. Can you try plugging your 3rd party controller directly into your XIM APEX (no hub) and tell us if things initialize correctly (i.e. you get the green init lights)?
Get the most out of your XIM NEXUS, read the XIM NEXUS Support FAQ.

Offline ZamZa

  • Member
  • *
  • Posts: 3
    • View Profile
  • PSN ID: ZamZa-SA
Astro C40 working. Same as it did on the TitanTwo

could you walk me through the process of connecting your astro.
The manager does not recognize my astro it doesnot show up however if i switch to wirless mode on the controller xim managers recognize it but does not pickup any inputs.

M I doing something wrong?

Offline prototipo13

  • Member
  • *
  • Posts: 153
    • View Profile
with the nacon compat controller same problem , with and witout

Offline BitWelder

  • Developer
  • Member
  • *
  • Posts: 66
    • View Profile
so for the razer raiju controller that works with the xim beta now?
is is the ultimate edition 2019 or the tournamnet edition or do they both work?

We have tested with the one marked RZ06-0197.
Get the most out of your XIM APEX, read the XIM APEX Support FAQ.

Offline prototipo13

  • Member
  • *
  • Posts: 153
    • View Profile
Those having initialization issues. Can you try plugging your 3rd party controller directly into your XIM APEX (no hub) and tell us if things initialize correctly (i.e. you get the green init lights)?

with the nacon compat controller same problem , with and witout