COD: MW & Warzone Configs (18/07/2022)

[biscojoe]

Hey Blamer

I really enjoy your settings and testing methods a lot, I'm going to give this one (250hz common) a try!

I was just wondering - when you were testing your configs (specifically this 250hz common) on MW/WZ, did you play around with different SAB values? Did they have a negative effect on this config in your opinion?

Yea dude, Blamer has put out some nice configs and taken the time to share with the community. Pretty shred.

On that note, you should definitely try the 10,000 DPI 500/500hz setup. I enjoy it a lot. Been using it lately and it's been great for me. Add a parachute aux to the config and you're good to go man. Pretty funny considering it's a vanilla setup on Common sync basically. no curves. no SAB. just .3 SA. I think I may play around with SAB values but for the time being, no change is required. Try it out for yourself if you haven't already.

[JamesFPS]

Hey Blamer

I really enjoy your settings and testing methods a lot, I'm going to give this one (250hz common) a try!

I was just wondering - when you were testing your configs (specifically this 250hz common) on MW/WZ, did you play around with different SAB values? Did they have a negative effect on this config in your opinion?

I didn't mess with SAB on this 250Hz/Common yet so I can't say 100%.  Im gunna give that a go! Thanks for mentioning this^

This jenk is addictive <3

Nice one! I think 35 SAB is a nice value for warzone, and has been confirmed by a few other xim players. Even ppl feel that putting the value as 0 gives a benefit without any real drawback. I'm actually testing various SAB values at the moment to see the deal myself

Hey Blamer

I really enjoy your settings and testing methods a lot, I'm going to give this one (250hz common) a try!

I was just wondering - when you were testing your configs (specifically this 250hz common) on MW/WZ, did you play around with different SAB values? Did they have a negative effect on this config in your opinion?

Yea dude, Blamer has put out some nice configs and taken the time to share with the community. Pretty shred.

On that note, you should definitely try the 10,000 DPI 500/500hz setup. I enjoy it a lot. Been using it lately and it's been great for me. Add a parachute aux to the config and you're good to go man. Pretty funny considering it's a vanilla setup on Common sync basically. no curves. no SAB. just .3 SA. I think I may play around with SAB values but for the time being, no change is required. Try it out for yourself if you haven't already.

Hey mate! Yeah I will give it a try at some point. This 250hz common is nice, although takes a little getting used to as perhaps there's some acceleration with the curve, but it works really well with AA which is what I guess we're all looking for.

Having said that, I have yet to find a config that feels better to me than 125HZ Xim 3.2K DPI off sync and SAB of your choice. Everything else vanilla but if you prefer a little stronger AA can go up to 2 smoothing on hip+ADS. Mouse movements feel unbelievably smooth, great AA interaction (I never get caught in the bubble and I stay on target), it just overall works amazingly for me and I have experimented with many different settings. I did test these same settings with 12K DPI, but personally I preferred 3.2K

[JamesFPS]

Yo Blamer,

Your 250hz common+curve config is insanely good 

I think I'm gonna stop trying to make my own configs and just use whatever your latest is 

I do use 35SAB as it's what I'm used to and have been switching between 3.2K and 12K to see what I prefer..

Keep up the great work!

[biscojoe]

for anyone wondering... after a buncha playing around with diff this diff that.. my go to's are def 15k mjfame variant and the 800dpi mjfame.

ez does it

[Blamer]

In-game Settings

Code: [Select]

Controller
├ Horizontal: 20 (Insane)
├ Vertical: 20 (Insane)
├ ADS (Low Zoom): 1
├ ADS (High Zoom): 1
├ Aim Assist: Standard
└ Aim Response: Standard

Playstation Deadzones (0.05 = Default Value)
├ 800 DPI • 0.02 to 0.05
├ 1,000 DPI • 0.03 to 0.05
├ 1,600 DPI • 0.04 or 0.05
├ 2,000 DPI • 0.04 or 0.05
├ 3,200 DPI • 0.04 or 0.05
├ 4,000 DPI • 0.04 or 0.05
├ 6,400 DPI • 0.04 or 0.05
├ 8,000 DPI • 0 04 or 0.05
├ 10,000 DPI • 0.04 or 0.05
├ 12,000 DPI • 0 04 or 0.05
├ 12,800 DPI • 0.04 or 0.05
├ 15,000 DPI • 0.04 or 0.05
├ 16,000 DPI • 0.04 or 0.05
├ 20,000 DPI • 0.05 or 0.06
└ 25,600 DPI • 0.05 or 0.06

Xbox Deadzones (0.07 = Default Value)
├ 800 DPI • 0.04 to 0.07
├ 1,000 DPI • 0.05 to 0.07
├ 1,600 DPI • 0.06 or 0.07
├ 2,000 DPI • 0.06 or 0.07
├ 3,200 DPI • 0.06 or 0.07
├ 4,000 DPI • 0.06 or 0.07
├ 6,400 DPI • 0.06 or 0.07
├ 8,000 DPI • 0 06 or 0.07
├ 10,000 DPI • 0.06 or 0.07
├ 12,000 DPI • 0 06 or 0.07
├ 12,800 DPI • 0.06 or 0.07
├ 15,000 DPI • 0.06 or 0.07
├ 16,000 DPI • 0.06 or 0.07
├ 20,000 DPI • 0.07 or 0.08
└ 25,600 DPI • 0.07 or 0.08


25,600 Variants
(RML's AAA Curve #6 on HIP & ADS)

HIP (250Hz)
• Off: 8.40 (0 to 2 Smoothing)
• Default: 4.20
• Common: 2.10 <- Currently Using
• Slow: 1.05

ADS (250Hz)
• Off: 4.20 (0 to 2 Smoothing)
• Default: 2.10
• Common: 1.05 <- Currently Using
• Slow: 0.52
HIP (500Hz)
• Off: 16.80 (4 to 8 Smoothing)
• Default: 8.40
• Common: 4.20
• Slow: 2.10

ADS (500Hz)
• Off: 8.40 (4 to 8 Smoothing)
• Default: 4.20
• Common: 2.10
• Slow: 1.05
HIP (1,000Hz)
• Off: 33.6 (16 to 20 Smoothing)
• Default: 16.80
• Common: 8.40
• Slow: 4.20

ADS (1,000Hz)
• Off: 16.80 (16 to 20 Smoothing)
• Default: 8.40
• Common: 4.20
• Slow: 2.10
Ballistic Curve: (HIP & ADS)

Code: [Select]

>>> XIM APEX [AAA Curve #6] START COPY >>>
X5BC:gACBLIJYgyCD6ISwhhiG4IeoiHCJOIrci6SMbI00jfyOxJCkkWySNJL8k8SUjJVUl0iYEJjYmaCaaJswm/icwJ7wn7iggKFIohCi2KOgpGilMKcQpxCnEKcQpxCnECcQJxAnECcQ:X5BC
<<< XIM APEX END COPY <<<
RML's AAA Curves Thread
https://community.xim.tech/index.php?topic=80148.0

Code: [Select]

DPI Conversion;

> ( Current DPI × Current XIM Sensitivity ) = Total
> ( Total ÷ New DPI ) = New XIM Sensitivity

[biscojoe]

25,600 DPI Variants
(RML's AAA Curve #6 on HIP & ADS)

HIP (250Hz)
• Off Sensitivity: 8.40
• Default Sensitivity: 4.20
• Common Sensitivity: 2.10 <- Currently Using
• Slow Sensitivity: 1.05

ADS (250Hz)
• Off Sensitivity: 4.20
• Default Sensitivity: 2.10
• Common Sensitivity: 1.05 <- Currently Using
• Slow Sensitivity: 0.52
HIP (500Hz)
• Off: 16.80 (4 to 8 Smoothing)
• Default: 8.40
• Common: 4.20
• Slow: 2.10

ADS (500Hz)
• Off: 8.40 (4 to 8 Smoothing)
• Default: 4.20
• Common: 2.10
• Slow: 1.05
HIP (1,000Hz)
• Off: 33.6 (11 to 20 Smoothing)
• Default: 16.80
• Common: 8.40
• Slow: 4.20

ADS (1,000Hz)
• Off: 16.80 (11 to 20 Smoothing)
• Default: 8.40
• Common: 4.20
• Slow: 2.10
Ballistic Curve: (HIP & ADS)

Code: [Select]

>>> XIM APEX [AAA Curve #6] START COPY >>>
X5BC:gACBLIJYgyCD6ISwhhiG4IeoiHCJOIrci6SMbI00jfyOxJCkkWySNJL8k8SUjJVUl0iYEJjYmaCaaJswm/icwJ7wn7iggKFIohCi2KOgpGilMKcQpxCnEKcQpxCnECcQJxAnECcQ:X5BC
<<< XIM APEX END COPY <<<
RML's AAA Curves Thread
https://community.xim.tech/index.php?topic=80148.0

Code: [Select]

DPI Conversion;

> ( Current DPI × Current XIM Sensitivity ) = Total
> ( Total ÷ New DPI ) = New XIM Sensitivity

Dude, nice!

Very clean. A job well done. Thanks for the updated post. Tons of variation for everyone! If you don't have 25.6k dpi on your mouse, just convert your dpi

[Snoofy]

25,600 DPI Sync. Variants
(RML's AAA Curve #6 on HIP & ADS)

HIP (250Hz)
• Off: 8.40 (0 to 2 Smoothing)
• Default: 4.20
• Common: 2.10 <- Currently Using
• Slow: 1.05

ADS (250Hz)
• Off: 4.20 (0 to 2 Smoothing)
• Default: 2.10
• Common: 1.05 <- Currently Using
• Slow: 0.52
HIP (500Hz)
• Off: 16.80 (4 to 8 Smoothing)
• Default: 8.40
• Common: 4.20
• Slow: 2.10

ADS (500Hz)
• Off: 8.40 (4 to 8 Smoothing)
• Default: 4.20
• Common: 2.10
• Slow: 1.05
HIP (1,000Hz)
• Off: 33.6 (16 to 20 Smoothing)
• Default: 16.80
• Common: 8.40
• Slow: 4.20

ADS (1,000Hz)
• Off: 16.80 (16 to 20 Smoothing)
• Default: 8.40
• Common: 4.20
• Slow: 2.10
Ballistic Curve: (HIP & ADS)

Code: [Select]

>>> XIM APEX [AAA Curve #6] START COPY >>>
X5BC:gACBLIJYgyCD6ISwhhiG4IeoiHCJOIrci6SMbI00jfyOxJCkkWySNJL8k8SUjJVUl0iYEJjYmaCaaJswm/icwJ7wn7iggKFIohCi2KOgpGilMKcQpxCnEKcQpxCnECcQJxAnECcQ:X5BC
<<< XIM APEX END COPY <<<
RML's AAA Curves Thread
https://community.xim.tech/index.php?topic=80148.0

Code: [Select]

DPI Conversion;

> ( Current DPI × Current XIM Sensitivity ) = Total
> ( Total ÷ New DPI ) = New XIM Sensitivity

Still playing with this?

what is the difference between this configuration and that of MJ Fame? with that of MJ fame do you have a stronger aim assist?

[Blamer]

Still playing with this?

Yes

what is the difference between this configuration and that of MJ Fame? with that of MJ fame do you have a stronger aim assist?

25k/250Hz Config.
• Max DPI for the Fluidity & Speed.
• Low XIM Sensitivity for Stability.
• RML #6 allows me to Decrease my XIM Sensitivity
even lower without affecting the AA negatively. (To some extent)

MJs Method is solid if "more AA" is what you're looking for.

[Rudzins]

Hey Blamer,

Any changes since last update for 12,000
dpi version ??

[Blamer]

Hey Blamer,

Any changes since last update for 12,000
dpi version ??

Hey!

I didn't make any changes config wise since last Update.

You may want to re-adjust your xim Sensitivity a little bit or mess with your in-game settings.^

(I'll be back after the holidays. ❤)

[hicksy30]

Hey blamer have you done one for warzone Pacific bro

[Rudzins]

I’m waiting for it as well 

[hicksy30]

OK 👍 👌

[Blamer]

Warzone Pacific Settings (Test)

In-Game Settings:

Code: [Select]

Left Stick Min Input: 0.10+
Right Stick Min Input: 0.10+
Left Stick Max Input: 1
Right Stick Max Input: 1
Horizontal Sensitivity: 20
Vertical Sensitivity: 20
ADS Sensitivity Multiplier: 1
Custom Sensitivity Per Zoom: Off
Camera Movements: Least - 50%DPI: 25,600
Polling Rate: 250Hz
XIM Apex: 250Hz

HIP Sensitivity: 2.05 (Instead of 2.10)
Common Sync

ADS Sensitivity: 1.05
Common Sync

HIP & ADS Curve

Code: [Select]

X5BC:gACBLIJYgyCD6ISwhhiG4IeoiHCJOIrci6SMbI00jfyOxJCkkWySNJL8k8SUjJVUl0iYEJjYmaCaaJswm/icwJ7wn7iggKFIohCi2KOgpGilMKcQpxCnEKcQpxCnECcQJxAnECcQ:X5BC
Test Configuration (w/Warzone ST)

Code: [Select]

X5C: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:X5C

Notes:

Code: [Select]

> Warzone ST feels a bit more responsive than the MW2019 ST (HIP Specifically.)
> In-game settings can be optimized.

[Rudzins]

Anything for 16,000 dpi or less ?