XIM Community

*UPDATED* Hyperscape ST (Xbox)  (Read 1784 times)

Offline GoodAimButATankMain

  • Member
  • *
  • Posts: 415
  • Be, the ball!
    • View Profile
  • Gamertag: HowGoodsMyWidow
*UPDATED* Hyperscape ST (Xbox)
« on: 03:26 AM - 08/20/20 »
UPDATE: 8/28/20
Hey guys, just wanted to say that they have the aim update planned for next week :) Once this is released, I will make a new config with the optimal settings ASAP, play some games testing it, and once I feel like I have the curve accurate enough with my tests, I will release it to the forums. I will post my updated hyperscape config on the forums and post a link to it in here so everyone can find it. The curve may take longer than usual to post because I want to get it very accurate and take my time collecting the data for the best experience possible for everyone.

UPDATE: 8/25/20
I decided to add more data to the curve because i have no idea how long it will take the hyperscape devs to update the aim system (They are saying auto run is coming next season). In the meantime, i wanted everyone to have an accurate ST to use while they wait for my new aim update curve or the original ST once they make one :) As always, i only have an xbox and pc so i cannot confirm whether or not this works the same on ps4, and i also have not tested it on pc. Anyways here is the curve:

>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:h26N547ij86QrZGDkl2TOZQVlPCVzJanl4KYXpk6meyagZsHm4Gb9ZxgnMadJZ2InfGeWp7DnyyfkZ/0oFagtqEVoW6hwqIUomOir6L5o0Sjk6PipDKkgaTQpR+lbqW+pg2mXKas:X5BC
<<< XIM APEX END COPY <<<

I also changed my dpi to 12000 and switched to off sync with 3 xim smoothing. Feels better than default sync to me. I also changed my ingame sens to 100 100 with this curve, if you are still used to 50 50 or another sens, u can edit the end value of the ballistic curve editor to 100 instead of 99 so you can keep the fast turn if you would like (on 100 100 i dont feel like i need the faster turn and im more consistent without it) :)
Intro

Made a quick curve for all the hyper scape players using my aim translation method :) Ill make a better one using more data after the aim mechanic updates.

Settings

Make a generic alpha config, put the xy ratio to 1.4 (feels good to me but u can play with anything). Go to the hip section and paste this curve in:

>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:ifGM046Qj9yQ6pHPkpiTTJQVlPCVzJanl4GYPpj0maOaTJrvm4WcBZx9nO6dWp3AniKegJ7ZnzCfjJ/qoEagoKD5oVGhp6H8olCio6L1o0ajmKPqpDuki6TbpSqleKXGphOmYKcQ:X5BC
<<< XIM APEX END COPY <<<

Then make an aux for the ads if u want and copy the curve there also.

Ingame settings

The curve was made using 50 vertical and 50 horizontal sens. This is the most accurate range, but u can increase if u want. Use 10 right stick deadzone as well.

End

Let me know how u guys like it :) Join my discord for more configs n a great little community:

https://discord.gg/tbuD8RP
« Last Edit: 08:54 AM - 08/28/20 by GoodAimButATankMain »
Dont try to fix something that's not broken! My perfect sens: 41cm/360.

*****NEW CHANNEL UPDATED LINK*****
 Youtube: https://www.youtube.com/channel/UCnQ1sLl99p1S48Pf4QTZ6tw
^          ^           ^           ^           ^          ^                ^   
Discord:
https://discord.gg/tbuD8RP

Offline Acapella

  • Member
  • *
  • Posts: 165
    • View Profile
Re: My custom generic alpha config for hyperscape (xbox)
« Reply #1 on: 07:20 PM - 08/20/20 »
Definitely the best config on here, thanks a lot man.

Offline GoodAimButATankMain

  • Member
  • *
  • Posts: 415
  • Be, the ball!
    • View Profile
  • Gamertag: HowGoodsMyWidow
Re: My custom generic alpha config for hyperscape (xbox)
« Reply #2 on: 07:28 PM - 08/20/20 »
Yup no problem :) When the update comes out for the aim mechanic i will make a updated curve with it asap.
Dont try to fix something that's not broken! My perfect sens: 41cm/360.

*****NEW CHANNEL UPDATED LINK*****
 Youtube: https://www.youtube.com/channel/UCnQ1sLl99p1S48Pf4QTZ6tw
^          ^           ^           ^           ^          ^                ^   
Discord:
https://discord.gg/tbuD8RP

Offline Lowkeeloki

  • Member
  • *
  • Posts: 88
    • View Profile
  • PSN ID: Iíll tell you when you DM
Re: My custom generic alpha config for hyperscape (xbox)
« Reply #3 on: 07:29 PM - 08/20/20 »
Yo my boy, can you get one done for ps4 I cannot stand the R6 one

Offline GoodAimButATankMain

  • Member
  • *
  • Posts: 415
  • Be, the ball!
    • View Profile
  • Gamertag: HowGoodsMyWidow
Re: My custom generic alpha config for hyperscape (xbox)
« Reply #4 on: 07:31 PM - 08/20/20 »
Unfortunately no, i only own xbox so i cant. U can try messing with the stick deadzone ingame to see if u can get it to feel better with my config but im not 100% sure if itll work or not.
Dont try to fix something that's not broken! My perfect sens: 41cm/360.

*****NEW CHANNEL UPDATED LINK*****
 Youtube: https://www.youtube.com/channel/UCnQ1sLl99p1S48Pf4QTZ6tw
^          ^           ^           ^           ^          ^                ^   
Discord:
https://discord.gg/tbuD8RP

Offline GoodAimButATankMain

  • Member
  • *
  • Posts: 415
  • Be, the ball!
    • View Profile
  • Gamertag: HowGoodsMyWidow
Re: My custom generic alpha config for hyperscape (xbox)
« Reply #5 on: 07:34 PM - 08/20/20 »
And to anyone wondering, i use 3200 dpi, 1khz on mouse n xim, 90 xim sens, 50 50 hyperscape sens, 45 45 ads sens, 10 10 deadzone values, and no aux :) feels the best to me but u can obviously change these to suit u n ur playstyle better
Dont try to fix something that's not broken! My perfect sens: 41cm/360.

*****NEW CHANNEL UPDATED LINK*****
 Youtube: https://www.youtube.com/channel/UCnQ1sLl99p1S48Pf4QTZ6tw
^          ^           ^           ^           ^          ^                ^   
Discord:
https://discord.gg/tbuD8RP

Offline GoodAimButATankMain

  • Member
  • *
  • Posts: 415
  • Be, the ball!
    • View Profile
  • Gamertag: HowGoodsMyWidow
Re: My custom generic alpha config for hyperscape (xbox)
« Reply #6 on: 07:51 PM - 08/20/20 »
I have written an entire guide on how i create my curves. If someone wants to make a ps4 curve, they can read the guide and make one. Join my discord n dm me if u wanna do it tho because i had to do things a bit different for hyperscape because the aim mechanic is different :)
Dont try to fix something that's not broken! My perfect sens: 41cm/360.

*****NEW CHANNEL UPDATED LINK*****
 Youtube: https://www.youtube.com/channel/UCnQ1sLl99p1S48Pf4QTZ6tw
^          ^           ^           ^           ^          ^                ^   
Discord:
https://discord.gg/tbuD8RP

Offline GoodAimButATankMain

  • Member
  • *
  • Posts: 415
  • Be, the ball!
    • View Profile
  • Gamertag: HowGoodsMyWidow
Re: My custom generic alpha config for hyperscape (xbox)
« Reply #7 on: 08:41 PM - 08/24/20 »
So i think the config needs to be made on a little higher sensitivity. I find 50 50 is sometimes a tad too slow when trying to get picks with the shotgun or harpy at close range. I tried upping my sensitivity to 100 100 to see if my curve still works good enough, it makes micro movements feel fast but i found that dropping the starting value of the curve to arround 20 fixes the fast micro movements (Keep in mind my curve isnt a complete 1:1 translation since i used only arround 6 data values to make it). I also dropped the end of the curve to 99 to get rid of the fast dual zone as i found the inner dual zone was fast enough for my turning and 100% stick tilt was too fast to be reliable. Ive played a few games with it now and it feels alright, idk if it feels as good as my curve on 50 50 but that could be due to the curve not having enough data to be completely 1:1. Anyways, give it a try and see which u like more guys :) Im not gunna waste my time adding more data to the curve because once the new settings come out i will need to make a new one anyways, but this is the best i can do for now.
Dont try to fix something that's not broken! My perfect sens: 41cm/360.

*****NEW CHANNEL UPDATED LINK*****
 Youtube: https://www.youtube.com/channel/UCnQ1sLl99p1S48Pf4QTZ6tw
^          ^           ^           ^           ^          ^                ^   
Discord:
https://discord.gg/tbuD8RP

Offline facade

  • MVP
  • *
  • Posts: 1462
    • View Profile
  • Gamertag: xi scion ix
  • PSN ID: SeneschalGrigori
Re: *UPDATED* Hyperscape ST (Xbox)
« Reply #8 on: 11:19 AM - 08/25/20 »
I think I'm going to have to just wait till they come out with an actual translator for this game.

Granted I tried this on PS4 this and some other random translator I've tried aren't bad if I want to hipfire, but ADS feels terrible and you can feel the cursor suddenly just get super wonky in ADS mode when getting anywhere near your target.

Offline GoodAimButATankMain

  • Member
  • *
  • Posts: 415
  • Be, the ball!
    • View Profile
  • Gamertag: HowGoodsMyWidow
Re: *UPDATED* Hyperscape ST (Xbox)
« Reply #9 on: 11:23 AM - 08/25/20 »
Yeah, i assumed it probably wouldnt work on ps4. Most games on xbox have a larger deadzone than on ps4, so my curves normally dont match up directly with the ps4. Have u tried going into the training range and changing the deadzone arround a little bit? Increasing it a little bit on ps4 might help match it up with xbox and make it feel better, but im not sure if it changes the aim curve differently or not. It is worth a try though :)
Dont try to fix something that's not broken! My perfect sens: 41cm/360.

*****NEW CHANNEL UPDATED LINK*****
 Youtube: https://www.youtube.com/channel/UCnQ1sLl99p1S48Pf4QTZ6tw
^          ^           ^           ^           ^          ^                ^   
Discord:
https://discord.gg/tbuD8RP

Offline GoodAimButATankMain

  • Member
  • *
  • Posts: 415
  • Be, the ball!
    • View Profile
  • Gamertag: HowGoodsMyWidow
Re: *UPDATED* Hyperscape ST (Xbox)
« Reply #10 on: 11:41 AM - 08/25/20 »
Oh myb guys, i pasted the wrong "updated curve" xD, I just updated it to the right one. If u copied the last, micro movements feel jumpy, this new curve fixes that lol, just copy the updated curve again and paste that back in
Dont try to fix something that's not broken! My perfect sens: 41cm/360.

*****NEW CHANNEL UPDATED LINK*****
 Youtube: https://www.youtube.com/channel/UCnQ1sLl99p1S48Pf4QTZ6tw
^          ^           ^           ^           ^          ^                ^   
Discord:
https://discord.gg/tbuD8RP

Offline facade

  • MVP
  • *
  • Posts: 1462
    • View Profile
  • Gamertag: xi scion ix
  • PSN ID: SeneschalGrigori
Re: *UPDATED* Hyperscape ST (Xbox)
« Reply #11 on: 11:45 AM - 08/25/20 »
I haven't, but I'm not the type of person that plays with that stuff nor plays this game a lot which means I'd be spending my very limited game time messing with configs and not pew pewing ;)

I'll just wait :)

Offline GoodAimButATankMain

  • Member
  • *
  • Posts: 415
  • Be, the ball!
    • View Profile
  • Gamertag: HowGoodsMyWidow
Re: *UPDATED* Hyperscape ST (Xbox)
« Reply #12 on: 11:53 AM - 08/25/20 »
Fair enough haha. Well sorry it didnt work for u man, I wish xbox and ps4 had the same deadzones so this type of problem never existed lol. Well hopefully they update the aim mechanic soon so we can all have a better experience xD
Dont try to fix something that's not broken! My perfect sens: 41cm/360.

*****NEW CHANNEL UPDATED LINK*****
 Youtube: https://www.youtube.com/channel/UCnQ1sLl99p1S48Pf4QTZ6tw
^          ^           ^           ^           ^          ^                ^   
Discord:
https://discord.gg/tbuD8RP

Offline GoodAimButATankMain

  • Member
  • *
  • Posts: 415
  • Be, the ball!
    • View Profile
  • Gamertag: HowGoodsMyWidow
Re: *UPDATED* Hyperscape ST (Xbox)
« Reply #13 on: 12:40 PM - 08/25/20 »
Just got my first dub (lvl 25) playing with this curve first real game of testing it lol. I ran harpy and riot 1 with invis and slam, curve feels REALLY clean and i was able to melt people with that setup no matter the range
Dont try to fix something that's not broken! My perfect sens: 41cm/360.

*****NEW CHANNEL UPDATED LINK*****
 Youtube: https://www.youtube.com/channel/UCnQ1sLl99p1S48Pf4QTZ6tw
^          ^           ^           ^           ^          ^                ^   
Discord:
https://discord.gg/tbuD8RP

Offline Hitless

  • Member
  • *
  • Posts: 91
    • View Profile
  • Gamertag: LtHitlis
  • PSN ID: Lt Hitlis
Re: *UPDATED* Hyperscape ST (Xbox)
« Reply #14 on: 08:15 PM - 08/27/20 »
UPDATE: 8/25/20
I decided to add more data to the curve because i have no idea how long it will take the hyperscape devs to update the aim system (They are saying auto run is coming next season). In the meantime, i wanted everyone to have an accurate ST to use while they wait for my new aim update curve or the original ST once they make one :) As always, i only have an xbox and pc so i cannot confirm whether or not this works the same on ps4, and i also have not tested it on pc. Anyways here is the curve:

>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:h26N547ij86QrZGDkl2TOZQVlPCVzJanl4KYXpk6meyagZsHm4Gb9ZxgnMadJZ2InfGeWp7DnyyfkZ/0oFagtqEVoW6hwqIUomOir6L5o0Sjk6PipDKkgaTQpR+lbqW+pg2mXKas:X5BC
<<< XIM APEX END COPY <<<

I also changed my dpi to 12000 and switched to off sync with 3 xim smoothing. Feels better than default sync to me. I also changed my ingame sens to 100 100 with this curve, if you are still used to 50 50 or another sens, u can edit the end value of the ballistic curve editor to 100 instead of 99 so you can keep the fast turn if you would like (on 100 100 i dont feel like i need the faster turn and im more consistent without it) :)
Intro

Made a quick curve for all the hyper scape players using my aim translation method :) Ill make a better one using more data after the aim mechanic updates.

Settings

Make a generic alpha config, put the xy ratio to 1.4 (feels good to me but u can play with anything). Go to the hip section and paste this curve in:

>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:ifGM046Qj9yQ6pHPkpiTTJQVlPCVzJanl4GYPpj0maOaTJrvm4WcBZx9nO6dWp3AniKegJ7ZnzCfjJ/qoEagoKD5oVGhp6H8olCio6L1o0ajmKPqpDuki6TbpSqleKXGphOmYKcQ:X5BC
<<< XIM APEX END COPY <<<

Then make an aux for the ads if u want and copy the curve there also.

Ingame settings

The curve was made using 50 vertical and 50 horizontal sens. This is the most accurate range, but u can increase if u want. Use 10 right stick deadzone as well.

End

Let me know how u guys like it :) Join my discord for more configs n a great little community:

https://discord.gg/tbuD8RP

Whatís your Xim sensitivity settings?
XBox One X PS4 Pro
G502 Gaming Mouse
Corsair Strafe RGB mechanical gaming keyboard
CloudX HyperX headphones
Standard Xbox one controller with Stereo Headset Adapter