XIM Community

Matching your Rainbow six siege pc sens with your xim  (Read 1112 times)

Offline Keciho

  • Member
  • *
  • Posts: 1
    • View Profile
I wanted to share the method that i used to have my sensitivity that i use on PC on the Xim.

I've started play on PC for a while but i miss my homies on PS4. The only problem was that i wanna keep play m/k with the sens that i use on PC. But i found a solution for it.

I saw a video on youtube of a guy who was using Beaulo's sensitivity. His sens was 28 and his 360° 43cm so i used it as a base line. (the rest of the settings are the same as below)

if ---> 28 (Ximsens) = 43 (360 / cm)
       
         my 360 / cm 50.0731
       
         50.0731 : 100 = 43 : x
         100 * 43 / 50.0731 = 84.76079714572944 (my percentage compared to 43)

         28 : 100 =  x : 84.76079714572944
         28 * 84.76079714572944 / 100 = 23.73302320080424 (my sens with my 360 / cm)

         formula:

         100 * 43 / (your360 / cm) = (your percentage)
       
         28 * (your percentage) / 100 = (your xim sens with your 360 / cm)


For the rest of the settings:

Don't use any curve or smoothing

Synchronize "off"

"Use Hip fire translator" for both hip fire and ads sens

For the ingame settings i use the recommended settings

Response time "500Hz"

For the mouse 12kdpi and response time "1000Hz"

Offline Feel

  • Member
  • *
  • Posts: 132
    • View Profile
Re: Matching your Rainbow six siege pc sens with your xim
« Reply #1 on: 11:44 PM - 07/26/20 »
Yeah or you can just raise and lower your XIM sense measuring your 360 everytime with a ruler or tape measure till it matches your pc cm/360

Offline Tech Jack

  • Member
  • *
  • Posts: 2
    • View Profile
Re: Matching your Rainbow six siege pc sens with your xim
« Reply #2 on: 05:36 AM - 07/29/20 »
Hey Keciho,

thanks for the information that was really helpful!

cheers
jack

Offline Acapella

  • Member
  • *
  • Posts: 106
    • View Profile
Re: Matching your Rainbow six siege pc sens with your xim
« Reply #3 on: 11:13 PM - 07/30/20 »
I wanted to share the method that i used to have my sensitivity that I use on PC on the xim...
Same method I use lol, if anyone’s curious 3200dpi/500hz default sync gives you 40cm/360 at approximately 29.25 sensitivity on Xbox.

The formula is (40 / desired cm360) x 29.25 = xim sens

You can convert from pc sensitivity to cm/360 using this site:
https://jscalc.io/calc/owqD7YSQyTD3Rli1

This works for both hip and ads using their respective translators

Eg S1mples cs sens of 33.61cm/360 would be

(40 / 33.61) x 29.25 = 34.81 xim sens (@3200dpi/500hz/default sync)
« Last Edit: 11:23 PM - 07/30/20 by Acapella »