XIM Community

*PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter  (Read 6312 times)

Offline GoodAimButATankMain

  • Member
  • *
  • Posts: 282
  • Be, the ball!
    • View Profile
  • Gamertag: HowGoodsMyWidow
Hey everyone! Sorry I havent posted any updates in a while. I would like to say that I have started playing on pc and dont want to switch back to console anytime soon. This means i wont be playing with my xim much, and there will probably be no more new curves from me anytime soon. Ive just dedicated so many hours to this project and I dont have the energy to continue anymore. I have a guide on how exactly I create these curve's, so anyone is welcome to continue making configs if they want to. Thanks for all the support guys, hope you understand! :)
Dont try to fix something that's not broken! My perfect sens:27.36cm/360

Youtube: https://www.youtube.com/channel/UCeFZX4ht4zxyo7nT3ueQPjw/about
Discord:
https://discord.gg/tbuD8RP

Offline jerrylee

  • Member
  • *
  • Posts: 16
    • View Profile
If I have some time, I'll try to make the curve for PS4 using the guide this weekend.

But I want to ask you guys that have a PS4 a favor.

Following the guide, I've started to make some tests here and I've noticed when I spin with 100% walk speed things go fine, but if I go down that percentage, let's say, 30% like in the guide, the crosshair starts to go up with each spin. I'll make a video to demonstrate better and edit this message with it.

Could anyone try to spin in place and see if the crosshair goes up with 30% walk speed? I recommend the same place in training mode as in the guide.

Edit:
« Last Edit: 12:23 PM - 06/05/20 by jerrylee »

Offline Boomboks

  • Member
  • *
  • Posts: 41
    • View Profile
  • Gamertag: Boomboks
Hey everyone! Sorry I havent posted any updates in a while. I would like to say that I have started playing on pc and dont want to switch back to console anytime soon. This means i wont be playing with my xim much, and there will probably be no more new curves from me anytime soon. Ive just dedicated so many hours to this project and I dont have the energy to continue anymore. I have a guide on how exactly I create these curve's, so anyone is welcome to continue making configs if they want to. Thanks for all the support guys, hope you understand! :)

The process is too complex for me and I was really looking forward to the 60AEI config you announced. But
that said, you did a ton for the community, more than we can expect out of just one person. Still using your 33AEI config and recommending it to people. Thanks for your contributions :)

Offline GoodAimButATankMain

  • Member
  • *
  • Posts: 282
  • Be, the ball!
    • View Profile
  • Gamertag: HowGoodsMyWidow
If I have some time, I'll try to make the curve for PS4 using the guide this weekend.

But I want to ask you guys that have a PS4 a favor.

Following the guide, I've started to make some tests here and I've noticed when I spin with 100% walk speed things go fine, but if I go down that percentage, let's say, 30% like in the guide, the crosshair starts to go up with each spin. I'll make a video to demonstrate better and edit this message with it.

Could anyone try to spin in place and see if the crosshair goes up with 30% walk speed? I recommend the same place in training mode as in the guide.

Edit:

Yeah, ive experienced this problem in a few xbox titles as well :) Check that ur "simulate analog behavior" is ticked to "OFF" because even at "0%" it will still be activated and mess with the results. U get it to the "OFF" position by clicking 1 more time to the left after 0%.
Dont try to fix something that's not broken! My perfect sens:27.36cm/360

Youtube: https://www.youtube.com/channel/UCeFZX4ht4zxyo7nT3ueQPjw/about
Discord:
https://discord.gg/tbuD8RP

Offline GoodAimButATankMain

  • Member
  • *
  • Posts: 282
  • Be, the ball!
    • View Profile
  • Gamertag: HowGoodsMyWidow
Also, I know the guide says 30%, 60%, and 90% stick tilt (or something like that to get a base curve), but this game does not have a strait parabola meaning ur going to need more data points to get an accurate result :) for comparison, I used 20% all the way up to 100% in increments of 5% (like 20, 25, 30, 35% ...) to get an accurate curve, and then worked on the areas that didnt have as many data points. Depending on how much time u have, u can use either more or less data, but more data will give a more accurate result :)
Dont try to fix something that's not broken! My perfect sens:27.36cm/360

Youtube: https://www.youtube.com/channel/UCeFZX4ht4zxyo7nT3ueQPjw/about
Discord:
https://discord.gg/tbuD8RP

Offline GoodAimButATankMain

  • Member
  • *
  • Posts: 282
  • Be, the ball!
    • View Profile
  • Gamertag: HowGoodsMyWidow
You can pm me if u have any questions, and ill be willing to help in any way i can :)
Dont try to fix something that's not broken! My perfect sens:27.36cm/360

Youtube: https://www.youtube.com/channel/UCeFZX4ht4zxyo7nT3ueQPjw/about
Discord:
https://discord.gg/tbuD8RP

Offline jerrylee

  • Member
  • *
  • Posts: 16
    • View Profile
Yeah, ive experienced this problem in a few xbox titles as well :) Check that ur "simulate analog behavior" is ticked to "OFF" because even at "0%" it will still be activated and mess with the results. U get it to the "OFF" position by clicking 1 more time to the left after 0%.

Man, I swear to you that yesterday before sleep I've thinked about that!
I'll try to put SAB to OFF today.

I'll try to make the curve with increments of 5% like you suggested and if I need some help I'll sure pm you. Thanks!

Update: SAB was set to OFF, it is in the guide.  :( So the problem persists.
« Last Edit: 07:39 AM - 06/06/20 by jerrylee »

Offline GoodAimButATankMain

  • Member
  • *
  • Posts: 282
  • Be, the ball!
    • View Profile
  • Gamertag: HowGoodsMyWidow
Hmmm, well thats never happend to me before while SAB was turned off so thats odd? I wonder if its coded in the game for some reason on ps4  ??? Well, I wonder if on every stick tilt value, the cursor goes up at the same ratio, u may be able to still get pretty accurate results since EVERY value will go up. U could try choosing a starting target thats pretty low on the ground, and then choose a target thats kind of high up as ur end target so then u still have to do quite a bit of spins to get accurate results. Im not sure if this will work though, because if the vertical stick tilt goes at the same speed through all of the stick tilt values, when using lower stick tilt values ur cursor will go up a lot faster than it will on a high stick tilt value.
Dont try to fix something that's not broken! My perfect sens:27.36cm/360

Youtube: https://www.youtube.com/channel/UCeFZX4ht4zxyo7nT3ueQPjw/about
Discord:
https://discord.gg/tbuD8RP

Offline GoodAimButATankMain

  • Member
  • *
  • Posts: 282
  • Be, the ball!
    • View Profile
  • Gamertag: HowGoodsMyWidow
If i were you, id try recreating the configuration? Use "Generic Alpha", turn your sab completely off, and then I also take the extra precaution of turning my xim sensitivity to 0, setting the whole xim curve to 0, and turning my xy ratio to 0. I also turn my boost to 0, then i bind my look stick to my arrow keys, and then bind the right sticks "walk" key to my right arrow key. Im not sure if this will help, but its worth a try? I do all this because i dont wanna accidentally slide my mouse and mess up the translation lol
Dont try to fix something that's not broken! My perfect sens:27.36cm/360

Youtube: https://www.youtube.com/channel/UCeFZX4ht4zxyo7nT3ueQPjw/about
Discord:
https://discord.gg/tbuD8RP

Offline GoodAimButATankMain

  • Member
  • *
  • Posts: 282
  • Be, the ball!
    • View Profile
  • Gamertag: HowGoodsMyWidow
Also, check that ur in game sens is set to 0 on both vertival and horizontal sensitivity? And adjust ur in game settings to linear with 33aei or whatever in game settings u wanted to use for config? Can u try these and tell me if the problem still persists?
« Last Edit: 11:42 AM - 06/06/20 by GoodAimButATankMain »
Dont try to fix something that's not broken! My perfect sens:27.36cm/360

Youtube: https://www.youtube.com/channel/UCeFZX4ht4zxyo7nT3ueQPjw/about
Discord:
https://discord.gg/tbuD8RP

Offline jerrylee

  • Member
  • *
  • Posts: 16
    • View Profile
Hmmm, well thats never happend to me before while SAB was turned off so thats odd? I wonder if its coded in the game for some reason on ps4  ??? Well, I wonder if on every stick tilt value, the cursor goes up at the same ratio, u may be able to still get pretty accurate results since EVERY value will go up. U could try choosing a starting target thats pretty low on the ground, and then choose a target thats kind of high up as ur end target so then u still have to do quite a bit of spins to get accurate results. Im not sure if this will work though, because if the vertical stick tilt goes at the same speed through all of the stick tilt values, when using lower stick tilt values ur cursor will go up a lot faster than it will on a high stick tilt value.

Yes, I'm almost sure that it will not work either.

Quote
If i were you, id try recreating the configuration? Use "Generic Alpha", turn your sab completely off, and then I also take the extra precaution of turning my xim sensitivity to 0, setting the whole xim curve to 0, and turning my xy ratio to 0. I also turn my boost to 0, then i bind my look stick to my arrow keys, and then bind the right sticks "walk" key to my right arrow key. Im not sure if this will help, but its worth a try? I do all this because i dont wanna accidentally slide my mouse and mess up the translation lol

In the update of my post earlier I'd already tried all of that. I've even tried to change things that I know won't matter like the keyboard and the PS4 pad. I've tried to create a "Generic Beta" too, same results.

Quote
Also, check that ur in game sens is set to 0 on both vertival and horizontal sensitivity? And adjust ur in game settings to linear with 33aei or whatever in game settings u wanted to use for config? Can u try these and tell me if the problem still persists?

Here are the configs I'm using, I think there's nothing wrong:



The curve is on default but I've already tried to flatten it.

Maybe I'll get it to work if I manually press the down key rapidly every couple of spins to adjust the height.  ???
« Last Edit: 01:22 PM - 06/06/20 by jerrylee »

Offline GoodAimButATankMain

  • Member
  • *
  • Posts: 282
  • Be, the ball!
    • View Profile
  • Gamertag: HowGoodsMyWidow
Maybe it would work but im not 100% sure? I wonder why it does that on the ps4 version but not the xbox version ??? I think rapidly pressing down might fix the issue, as long as the horizontal speed stays the same and the vertical speed doesnt change it? Or even if it does alter the curve slightly, the curve might still be accurate enough to use and would probably be hard to notice actually in a match. One thing I thought of to test whether or not its actually coded ingame or not is to try moving the xim curve to "30%" on both sides so the curve is a strait line across y axis 30. Then, turn your smoothing and steady aim to max and move your mouse to the right as slowly as possible. This will give u completely horizontal movement that will always be at 30% stick tilt as long as ur moving the mouse, and u can see whether or not the cursor moves up while doing this test. If it moves up, then its probably a game issue that we cant fix with any xim settings, but if it doesnt move, maybe its a xim firmware issue and maybe u can try going back to a earlier release? Im not sure which version im running but i can check if this is the case :)
Dont try to fix something that's not broken! My perfect sens:27.36cm/360

Youtube: https://www.youtube.com/channel/UCeFZX4ht4zxyo7nT3ueQPjw/about
Discord:
https://discord.gg/tbuD8RP

Offline GoodAimButATankMain

  • Member
  • *
  • Posts: 282
  • Be, the ball!
    • View Profile
  • Gamertag: HowGoodsMyWidow
Because i know many people have problems with the "simulate analog behavior" option, I wonder if maybe they messed something up if ur running a newer version?
Dont try to fix something that's not broken! My perfect sens:27.36cm/360

Youtube: https://www.youtube.com/channel/UCeFZX4ht4zxyo7nT3ueQPjw/about
Discord:
https://discord.gg/tbuD8RP

Offline jerrylee

  • Member
  • *
  • Posts: 16
    • View Profile
I've turned on "legacy sticks" in the game. It puts the spin on the left stick instead of the right one and it worked.  :o No crosshair going up!  ;D

I don't know if it will mess something up.  :-\

Offline GoodAimButATankMain

  • Member
  • *
  • Posts: 282
  • Be, the ball!
    • View Profile
  • Gamertag: HowGoodsMyWidow
I dont see why it would :) Thats a good idea! I should add that in my guide lol :D Nice job man!
Dont try to fix something that's not broken! My perfect sens:27.36cm/360

Youtube: https://www.youtube.com/channel/UCeFZX4ht4zxyo7nT3ueQPjw/about
Discord:
https://discord.gg/tbuD8RP


Admin