MW/Warzone Advanced Setup (12/22/20)

[RML]

MODERN WARFARE "ADVANCED SETUP"

UPDATES:
12/07/20 - New Curve for Hip and Ads. Updated Skydive sub. Changed Hip and Ads sensitivities. Using 60hz (In game) because this game is unstable at 120hz.
12/22/20 - Had the wrong curve in last update. Transition to Default Sync and sensitivities as it works great on Series X.

In Game Settings:
Xbox One (My Series X is out for repair, I'll update this when I get it back).
1440p/60hz
Sensitivity - Insane (20)
Ads sensitivity multiplier (low zoom) - 1
Ads sensitivity multiplier (high zoom) - .8
Aim Resonse Curve Type - LINEAR (This is SUPER important!)
Aim Assist - Standard
DZ - .07 (Default)

Mouse: (Razor Viper Ultimate)
1000hz.
12,000 dpi (dpi should be set to preference, I prefer high dpi while using Xim)

XIM:
MW 2019 ST
500hz.
Sync - Default
HIP:
Sensitivity - 5 + Curve
Y/X Ratio 1.20 (This is important and balances the curve)
ADS:
Activation delay - 224
Smooth Aim Transition - ON
Deactivation delay - 224
Sensitivity - 3 + Curve
Y/X Ratio 1.45 (This is important and balances the curve)

IF YOU USE A KEYBOARD DON'T FORGET TO CHANGE THE ADS ACTIVATION KEY!

HIP & ADS CURVE “This Curve is only meant to be used with LINEAR Curve in game”.

Code: [Select]

>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:AACAgoEEgZACP4LuA8+EsAW7BsWH0AiYCWAKKArwC7gMgA1IDhAO2A+gEGgRMBH4EsATiBRQFRgV4BaoF3AYOBkAGcgakBtYHCAc6B2wHngfQCAIINAhmCJgIygj8CS4JYAmSCcQ:X5BC
<<< XIM APEX END COPY <<<
FULL CONFIG CODE (Includes KILLSTREAKS/Skydive Sub Config).

Code: [Select]

>>> XIM APEX [RML - MWarzone 12/22/20 (Linear)] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<
ABOUT THIS SETUP “PLEASE READ”
I added the curve because the only issue I had with Linear was it being a little too sensitive with initial movements. This made it feel a little loose and jittery. The curve fixes that. The 1.20 Y/X Ratio offsets the curves effect on the Y Axis. You’ll notice that movement up and down will be slower then left to right. That’s because of the curve. Changing the Y/X ratio to 1.20 balances movements for me. You can add more or less based on your preferences.

Cheers!

[HypeR]

Nice iam trying Out now Ur still playing on hardpad?

[milkman]

Outstanding RML!!!
Any thoughts on your new settings "20,000dpi" and is their something for the
12k dpi fam?

Thank you for the settings!
Always the best.

[RML]

Nice iam trying Out now Ur still playing on hardpad?

I’ve switched to the Razor Chroma soft mousepad (I want to preserve my Vipers precious little feet!)

 

Outstanding RML!!!
Any thoughts on your new settings "20,000dpi" and is their something for the
12k dpi fam?

Thank you for the settings!
Always the best.

Works great at any dpi 4000 and above IMO.

12000 dpi Settings.
Hip - 2.5
Ads - 1.5

Cheers

[milkman]

Awesome like always!!!
Thank you sir...

[RML]

4000 Dpi setup:
Everything is the same as above, just change sensitivities.
Hip - 7.5
Ads - 4.5

IF YOURE USING A KB DONT FORGET TO CHANGE YOUR ADS ACTIVATION KEY (I’m a Nav user).

Cheers!

Bro,  are you using both hands to swipe that mouse away to turn ?  7,5hip and worst on 4,5 adas  on a 4000 dpi  its @#$% slow  !!!!?  or this is only me loll

Can you explain how i can get the delay 224 things on xim4 ?
[/quote]

Setup doesn’t work with Xim4

[DirtyLary]

Thanks for this. It runs good.

[GSA_Kronos_GR]

Hello RML
I want to ask you about the included auxiliary's in your config.
What is the use of them and about the included curves.
Thank you

[Prod1337]

Greetings, RML!

Have you messed with warzone, yet?

[milkman]

Greetings, RML!

Have you messed with warzone, yet?

I agree!! ""RML"" We need your Devine touch for "Warzone Setup" plz!!!!!

[RML]

Greetings, RML!

Have you messed with warzone, yet?

Yes, settings work great for Warzone.

Hello RML
I want to ask you about the included auxiliary's in your config.
What is the use of them and about the included curves.
Thank you

The only Aux that should be active is for cruise missile. I use an aux for this to raise the sensitivity about double hip. The others are curve #6 which is a curve I created to help with initial aim assist stick then accelerates to cut through AA at all ranges. I don’t currently use it, but it’s there if others want to. The other curve has the same intention, just less aggressive. The last curve was just me messing around and trying crazy ideas (I have a tendency to do stuff like that.)

Unfortunately we still can’t update threads, so this will probably get lost in the mix. As I continue to get used to this game I continue to adapt. I’m now using the following settings

Default Sync:
Hip - 4
Ads - 2

Everything else is the same. All changes I make going forward will be highlighted red and in bold font.

Please note that the new settings have LESS AIM ASSIST. If you like more AA stick with the original settings.

Stay safe everyone!

Cheers!

[milkman]

Thank you!!

[GSA_Kronos_GR]

Greetings, RML!

Have you messed with warzone, yet?

Yes, settings work great for Warzone.

Hello RML
I want to ask you about the included auxiliary's in your config.
What is the use of them and about the included curves.
Thank you

The only Aux that should be active is for cruise missile. I use an aux for this to raise the sensitivity about double hip. The others are curve #6 which is a curve I created to help with initial aim assist stick then accelerates to cut through AA at all ranges. I don’t currently use it, but it’s there if others want to. The other curve has the same intention, just less aggressive. The last curve was just me messing around and trying crazy ideas (I have a tendency to do stuff like that.)

Unfortunately we still can’t update threads, so this will probably get lost in the mix. As I continue to get used to this game I continue to adapt. I’m now using the following settings

Default Sync:
Hip - 4
Ads - 2

Everything else is the same. All changes I make going forward will be highlighted red and in bold font.

Please note that the new settings have LESS AIM ASSIST. If you like more AA stick with the original settings.

Stay safe everyone!

Cheers!

Thanks for the reply!
Stay at home....stay safe!!!

[Wxstrn-]

Wait a new beta? I don't see it. It says it's not available. It's the same number as the current main/stable release now.
Ahhhhh! Should I have no updated lol?

Also
I've been expirmenting again with off sync for this game but man!
250 hz off sync is nice...

But Mainly I just play common sync
1600-1800 dpi

16.00 HIP
1.0 SA
SAB 0

12.50 ADS
185-286 Activation Delay
150-200 Deactivation Delay
Smooth Trans= On
SAB= OFF

I also have been using a reverse dynamic curve lol.
It's almost like the dynamic curve used in game but is more sensitive at the beginning and also pairs nicely with the standard. However, linear feels like PC using my curve. If your aim is warm it's quite nice. You don't run into auto aim drag or anything while using linear with my curve.

Code: [Select]

>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:AAAAkgElAbcCSgLcA24EAYSThRMGEwcSCBIJEgoRCxEMEQ0QjhAPBg/7kPER3JLHE34UNRTrFaIWWRcQF8YYfRk0GesaoZtYG8scPRywHSIdlR4HHnoe7B9fH9EgRCC2ISkhm6IO:X5BC
<<< XIM APEX END COPY <<<
I hope I posted that right.

Here is a picture. If you want to use the curve on hip I would probably suggest moving the end of the curve up on the last value. Make sense? Anyways I've had great success with it. It's fun. Not some kind of magic I don't think. I like it though. Try it!









I hope I posted that right.
What's crazy is depending on how warm I am, how I want to play, what map it is, and what gun I'm using. I can almost interchangeably use 1800 dpi and 3200dpi rn for this and adjust using the same sense and everything.
Those with the curves. It sounds crazy just try it. lol.

[Obie_1_Kenobi]

Maybe I missed something but why is your polling rate different from mouse poll? And making these changes does sensitivity change apply? Or does it change only when you run Sync OFF @500hz and not Common Sync?