MW/Warzone Advanced Setup (12/22/20)

[Wxstrn-]

Wait a new beta? I don't see it. It says it's not available. It's the same number as the current main/stable release now.
Ahhhhh! Should I have no updated lol?

Also
I've been expirmenting again with off sync for this game but man!
250 hz off sync is nice...

But Mainly I just play common sync
1600-1800 dpi

16.00 HIP
1.0 SA
SAB 0

12.50 ADS
185-286 Activation Delay
150-200 Deactivation Delay
Smooth Trans= On
SAB= OFF

I also have been using a reverse dynamic curve lol.
It's almost like the dynamic curve used in game but is more sensitive at the beginning and also pairs nicely with the standard. However, linear feels like PC using my curve. If your aim is warm it's quite nice. You don't run into auto aim drag or anything while using linear with my curve.

Code: [Select]

>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:AAAAkgElAbcCSgLcA24EAYSThRMGEwcSCBIJEgoRCxEMEQ0QjhAPBg/7kPER3JLHE34UNRTrFaIWWRcQF8YYfRk0GesaoZtYG8scPRywHSIdlR4HHnoe7B9fH9EgRCC2ISkhm6IO:X5BC
<<< XIM APEX END COPY <<<
I hope I posted that right.

Here is a picture. If you want to use the curve on hip I would probably suggest moving the end of the curve up on the last value. Make sense? Anyways I've had great success with it. It's fun. Not some kind of magic I don't think. I like it though. Try it!









I hope I posted that right.
What's crazy is depending on how warm I am, how I want to play, what map it is, and what gun I'm using. I can almost interchangeably use 1800 dpi and 3200dpi rn for this and adjust using the same sense and everything.
Those with the curves. It sounds crazy just try it. lol.

1000hz Mouse
1000hz Xim Apex
Mainly I just play common sync
1600-1800 - 3200 dpi.    With 1800 being my main. I have a G502 and can switch dpi in game etc.

1.0 XY Xim
1.0 IN GAME
20/20


16.00=  HIP
SAB = 0
SA = 1.0
Boost = 0

12.50 ADS
185-250 Activation Delay
150-200 Deactivation Delay
Smooth Trans= On
SAB= 0
SA= 0.7
Boost= 50-85

Code: [Select]

>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:AAAAkgElAbcCSgLcA24EAYSThRMGEwcSCBIJEgoRCxEMEQ0QjhAPBg/7kPER3JLHE34UNRTrFaIWWRcQF8YYfRk0GesaoZtYG8scPRywHSIdlR4HHnoe7B9fH9EgRCC2ISkhm6IO:X5BC
<<< XIM APEX END COPY <<<









I'm so sorry I don't know why I cannot type rn. Here are the correct settings.

[Wxstrn-]

Wait a new beta? I don't see it. It says it's not available. It's the same number as the current main/stable release now.
Ahhhhh! Should I have no updated lol?

Also
I've been expirmenting again with off sync for this game but man!
250 hz off sync is nice...

But Mainly I just play common sync
1600-1800 dpi

16.00 HIP
1.0 SA
SAB 0

12.50 ADS
185-286 Activation Delay
150-200 Deactivation Delay
Smooth Trans= On
SAB= OFF

I also have been using a reverse dynamic curve lol.
It's almost like the dynamic curve used in game but is more sensitive at the beginning and also pairs nicely with the standard. However, linear feels like PC using my curve. If your aim is warm it's quite nice. You don't run into auto aim drag or anything while using linear with my curve.

Code: [Select]

>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:AAAAkgElAbcCSgLcA24EAYSThRMGEwcSCBIJEgoRCxEMEQ0QjhAPBg/7kPER3JLHE34UNRTrFaIWWRcQF8YYfRk0GesaoZtYG8scPRywHSIdlR4HHnoe7B9fH9EgRCC2ISkhm6IO:X5BC
<<< XIM APEX END COPY <<<
I hope I posted that right.

Here is a picture. If you want to use the curve on hip I would probably suggest moving the end of the curve up on the last value. Make sense? Anyways I've had great success with it. It's fun. Not some kind of magic I don't think. I like it though. Try it!









I hope I posted that right.
What's crazy is depending on how warm I am, how I want to play, what map it is, and what gun I'm using. I can almost interchangeably use 1800 dpi and 3200dpi rn for this and adjust using the same sense and everything.
Those with the curves. It sounds crazy just try it. lol.

[Dhosh]

I'll give it a shot. I really liked your PUBG setups and my aim in warzone has felt strange with my own config.

[Pyro]

RML.  Long time lurker.  Love the configs over the years.  What is the general reason for the switch from 1000hz to 500hz that I seem to be seeing across the board?  Thanks.

[RML]

RML.  Long time lurker.  Love the configs over the years.  What is the general reason for the switch from 1000hz to 500hz that I seem to be seeing across the board?  Thanks.

I can’t speak for everyone, but my shift is due to game design. The primary games I play these days have all started making a heavier emphasis on larger maps, sniping and Battle Royale. This makes micro movements much more important then they used to be. 500hz. Greatly improves micro movements over 1000hz. Without adding any smoothing or other settings. I still prefer 1000hz for very faster paced game modes like TDM or FFA with SMGs, However, it’s a pain in the arse to switch back and forth, so I stick with 500hz and adapt.

[RML]

Maybe I missed something but why is your polling rate different from mouse poll? And making these changes does sensitivity change apply? Or does it change only when you run Sync OFF @500hz and not Common Sync?

All that matters is that your mouse polling rate exceeds your Xim polling rate.

[RML]

Guys, I just gave disables config a shot and I highly, highly recommend it. It’s the best I’ve used with this game. Throw my settings away and go try this out.

https://community.xim.tech/index.php?topic=86302.0

The only thing I’ve done differently is as follows.
Low Zoom 1.3
High Zoom 1.1
Mouse Hz 500 (250 is not an option on my mouse)
Hip - 47
Ads - 27

Super crisp config, fast but feels really controlled not floaty at all.

Cheers!

[InZane]

RML, what is your current thoughts about 1.30x vs 1.0x ads? I've been using 1.33x ads on my reg mp config for months but changed to 1.0 for Warzone because it felt smoother (pre ST update). Is the hip-aim-hip transitions the exact same on 1.3 as 1.0?

[HypeR]

Guys, I just gave disables config a shot and I highly, highly recommend it. It’s the best I’ve used with this game. Throw my settings away and go try this out.

https://community.xim.tech/index.php?topic=86302.0

The only thing I’ve done differently is as follows.
Low Zoom 1.3
High Zoom 1.1
Mouse Hz 500 (250 is not an option on my mouse)
Hip - 47
Ads - 27

Super crisp config, fast but feels really controlled not floaty at all.

Cheers!

do u also add the 2 on both smoothing or left it on 0 ?

[RKilborn2386]

Guys, I just gave disables config a shot and I highly, highly recommend it. It’s the best I’ve used with this game. Throw my settings away and go try this out.

https://community.xim.tech/index.php?topic=86302.0

The only thing I’ve done differently is as follows.
Low Zoom 1.3
High Zoom 1.1
Mouse Hz 500 (250 is not an option on my mouse)
Hip - 47
Ads - 27

Super crisp config, fast but feels really controlled not floaty at all.

Cheers!

Did you still keep the XIM at 500 or switch to 250 XIM and 500 HZ on mouse?

[RML]

do u also add the 2 on both smoothing or left it on 0 ?

Everything is the same except what I posted.

Guys, I just gave disables config a shot and I highly, highly recommend it. It’s the best I’ve used with this game. Throw my settings away and go try this out.

https://community.xim.tech/index.php?topic=86302.0

The only thing I’ve done differently is as follows.
Low Zoom 1.3
High Zoom 1.1
Mouse Hz 500 (250 is not an option on my mouse)
Hip - 47
Ads - 27

Super crisp config, fast but feels really controlled not floaty at all.

Cheers!

Did you still keep the XIM at 500 or switch to 250 XIM and 500 HZ on mouse?

Xim = 250hz.
Mouse = 500hz (I don’t have a 250 option on my mouse)

[RKilborn2386]

do u also add the 2 on both smoothing or left it on 0 ?

Everything is the same except what I posted.

Guys, I just gave disables config a shot and I highly, highly recommend it. It’s the best I’ve used with this game. Throw my settings away and go try this out.

https://community.xim.tech/index.php?topic=86302.0

The only thing I’ve done differently is as follows.
Low Zoom 1.3
High Zoom 1.1
Mouse Hz 500 (250 is not an option on my mouse)
Hip - 47
Ads - 27

Super crisp config, fast but feels really controlled not floaty at all.

Cheers!

Did you still keep the XIM at 500 or switch to 250 XIM and 500 HZ on mouse?

Xim = 250hz.
Mouse = 500hz (I don’t have a 250 option on my mouse)

I have d4sables config and I seem to be having mouse acceleration from switching hip to ads but don’t have any curves. I think it might be the different low and high 1.3 and 1.1. May need to put them both on default again.

[BEDLAM13]

Cheers RML! I'll try this when I get home from work. I've been using native KB/m it feels fine to me, except no aim assist.. just wondering is there any other dis/5dvantages to using a xim native when it supports

[jlsoz]

Has anyone have any tips on inventory drops? Using the mouse to move left in right I found to unreliable.

[InZane]

Has anyone have any tips on inventory drops? Using the mouse to move left in right I found to unreliable.

There is a few ways to fix this. First off make an Aux profile for the inventory, then add a high sens and boost to the aim. An other method is to swap sticks in the Aux and use wasd or whatever buttons u want to manage the inventory. But then you wont be able to move while managing the inventory. I'm sure there is other methods as I have not tested this that much.