Apex Legends XIM setting for PC (closest feel) (Season-12)

[Djurik]

Ya, have updated settings, basically is same as V4, but with 3200 DPI and Maria's trick. You may find it on Discord in my signature. Recently many of us lost AA for like a week or so and now settings are under testing stage, that why not posted here yet. Will update in 1 week time. Now trying to settle my CPU 100% usage 1st, coz this probably affect AA as well.

[Djurik]

Unforeseen happen  . Not sure how old was my Xbox controller firmware, but yesterday i updated it and also reset calibration. So now all the settings are feels different from before, most become more better. My previous settings no more works for me, need to start to create settings and test out from scratch again, in the meantime using another fellow settings from Discord.
You might want to try update your controller firmware if its too old and you might notice different results. Will post the settings once have time to test out and finetune.

[Sm0keyApex]

I’m pretty sure mine hasn’t been updated in a while, but if I have everything working fine should I even attempt to update? Sounds like it could be a disaster lol

[Djurik]

if I have everything working fine should I even attempt to update

As a general rule, if it works - don't touch it  . Mine was really no AA in any settings, and also something wrong with deadzone (even if i set DZ4 - the crosshair already started to move by itself) so i did it as a last resort. Also this controller is very old and i never updated it once, so i guessed that the firmware is also the one that comes with controller from factory.


By the way, first S10 settings is out, see the 1st post.

[Djurik]

Small ADS Ballistic tweak that made micro aim more smoother, shots more accurate and also increased AA for me (ADS need to increase, for me it was 16->20):

Code: [Select]

>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:AAAAdQDrgWACLQL7A8gElQViBjAG/QfKCJcJZQoyCv8LzQyaDWcONA8CD88QnBFqEjcTBBPRFJ8VbBY5FwYX1BihGW4aPBsJG9Ycox1xHj4fCx/ZIKYhcyJAIw4j2ySoJXUmQycQ:X5BC
<<< XIM APEX END COPY <<<

[Djurik]

Updated settings for S11.

[jd394y]

Season 11 XIM Settings (Current)

Season 11 Settings (V1) - Currently (as of 16.11.21) works well, Strong AA, responsive fast movements.

Discord discussion here - https://discord.gg/rZAHr9BJw7
Upd: Initially there were only my settings, but community had been grown and now there is various settings by many players as well as the XIMMR files and curves collection. Lol, big friendly community now with no stress and free talks.

Some short gameplay here:

I had used the method of not opening settings publicly and it seems to works, so continue the same (Randomized values).

!! IMPORTANT !!:For this settings to work, you need to have v4.2 ST

Windows:
Mouse - default settings
Mouse Refresh rate - 1000Hz
DPI-2500
Xim Refresh rate - 125Hz
Xim FW - Latest as of now

In Game Settings:
Video:
Playing at 1920x1080p, Locked at 143 FPS
FOV - 106

Controller:
Menu cursor speed - center bar

Now important steps in controller settings (@Maria's trick):
1. Turn on ALC
2. Set all to 0 (only Outer Treshold min is 1)
3. Turn on Per Optics and set these values:
x1 - 8.2
All rest - 10
4. Now Turn Off ALC (dont disable per optics)
Next is in Controller Settings Tab:
5. Hip sensitivity - 7
6. ADS sensitivity - 2
7. Per Optics Sentivity - Disable
8. Look Deadzone - None
9. Responce Curve - Classic
10.Movement Deadzone - Large

Settings in XIM:

Titanfall 2 ST (Xbox)
(Note: Values below i will not give exact, everyone just use your own. This way settings can live longer)

HIP:
Sens - 18-22
Synchronize - Off
Smoothing - 3-5
Y/X - 1.10
Steady Aim - 1.0
Boost - 100
SAB - 0

ADS:
Sens - 15-19
Synchronize - Off
Smoothing - 2-4
Y/X - 1.20
Steady Aim - 1.2
Boost - 0
SAB - 80-100

Enjoy!!
 
Optional.
HIP Ballistics:

Code: [Select]

>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:AAAAWACxAQkBYQG6ghICpwM7g9AEZwT9BZSGKgbvB7UIegk/CgQKyouPDHoNZA5PDzoQJREPEfoS5RPPFLoVpRaPF3oYZRlQGjobJRwQHPod5R7QH7ogpSGQInsjZSRQJTsmJScQ:X5BC
<<< XIM APEX END COPY <<<


you have a link to v4.2 ST?

[Djurik]

Can download here:
https://drive.google.com/file/d/1-0p7wUQjVNDoIrO0WCbs8tb3B2RD9xy8/view?usp=sharing

[jd394y]

Can download here:
https://drive.google.com/file/d/1-0p7wUQjVNDoIrO0WCbs8tb3B2RD9xy8/view?usp=sharing

thanks! so Im using the current on manager and xim apex. I've been out of the loop with my xim + apex legends for a while. Whats the difference to what's out now compared to v4.2 ST? I've always used Titanfall 2 to play Apex and it worked better than the apex legends one lol

[Djurik]

They trained it to ALC settings instead of default, so it is much more responsive in terms of movement. But the issue is for many people is that it doesnt give good AA for PC, so for console this ST should be perfect balance of movement and slightly reduced AA. For PC everyone stick to 4.2 now.

[jd394y]

They trained it to ALC settings instead of default, so it is much more responsive in terms of movement. But the issue is for many people is that it doesnt give good AA for PC, so for console this ST should be perfect balance of movement and slightly reduced AA. For PC everyone stick to 4.2 now.

wow good to know! PC is all i use it on as of lately, Maybe Battlefield 2042 on xbox series x once they iron out the bugs, but  APEX is always on pc.

[jd394y]

Alright so i THINK I did it right....

Followed the video here: https://www.youtube.com/watch?v=n067N8qf1zE

Manager Version: 5.00.20190719
Firmware Version: 5.00.20201111

Manager version matches video, but Firmware version doesn't. Will that matter? In the video, they use the PS4 config. When clicking on the Apex Legends picture and it shows what it does in the video, "ApexL-Hip-P4.2". So am i all good now? Also the video states "these steps wont effect your other XIM config's", so if i normally use Titanfall 2 for a config, do i drop that and use the PS4 version? Or make a brand new TF2 config and it'll be able to take advantage of 4.2?  Sorry for so many questions lol, trying to figure this out.

[Djurik]

Will that matter?

As long as its not the latest Beta then is ok, coz latest Beta firmware become different ST, not compatible with old ones. But you can update to the normal latest version, no issue. I don't remember what are the updates with their latest version.(not Beta)

When clicking on the Apex Legends picture and it shows what it does in the video, "ApexL-Hip-P4.2". So am i all good now?

Yeah, you will be using PS4 config. It's because in the video he generated PS4 Config from Manager, you can generate Xbox too, so when you click on the picture it will show X1.1. This is what I use (Xbox ST 4.2).

Also the video states "these steps wont effect your other XIM config's", so if i normally use Titanfall 2 for a config, do i drop that and use the PS4 version? Or make a brand new TF2 config and it'll be able to take advantage of 4.2?

You may treat the XIMMR you downloaded as a library with the books, so those you previously taken still with you with no changes, the new ones you take - is the new ones from that library.. lol..
In other words - what you generate now in PC manager - will be PS4 4.2 or Xbox X1.1 configs (Apex and TF2, other games not sure). So if want take advantage of it - just rename those you newly generated as 4.2, so you will know which is which easy.

My XIM for example now have

Apex:
Xbox - 4.2 (X1.1)
Xbox - 4.3 (X1.2)
PS4 - 4.2
PS4 - 4.3

TF2:
Xbox - 4.2 (X1.1)
Xbox - 4.3 (X1.2)
PS4 - 4.2
PS4 - 4.3

So I can cycle them and test whenever I need it to, or if someone shared config with that specific version - I will just paste code into it..

The season 10 in Apex was quite stable for configs, was used only one config for the whole season, it worked great. Only some minor adjustments and DPI changes, but that was not related to XIM, own PC usage without changing DPI here and there. Not sure, maybe its because I randomized the values when share configs??!! (XIM bros for sure will say its not related, hahaha)

[Djurik]

Hi All,
Missed out important note, those start using config pls update:
!! IMPORTANT !!:
In ADS config - set activation button to left click. Was fine-tuning the config for this approach. Pros is:
1. Your ADS is as fast as HIP, quick target switching (it is slow down when you start firing)
2. Your Hipfire senses will slow down when you start shooting
3. Wingman, PK - easy to use up close

[jd394y]

My XIM for example now have

Apex:
Xbox - 4.2 (X1.1)
Xbox - 4.3 (X1.2)
PS4 - 4.2


TF2:
Xbox - 4.2 (X1.1)
Xbox - 4.3 (X1.2)
PS4 - 4.2
PS4 - 4.3

No @#$%? I didnt realize any of this lol. Seeing how i normally use TF2 for APEX would you say TF2 4.2 (X1.1) is better than 4.3 (x1.2) or was the apex one only effected by they retrained around ALC?

would you happen to have the download link for
1. APEX: Xbox - 4.2 (X1.1) (<--- would like to test this against the PS4 4.2)
2. Xbox - 4.2 (X1.1) (currently using the 4.3, so if 4.2 is better i'd def want)