XIM Community

XIM APEX BETA [Firmware 20191130]  (Read 10188 times)

Offline OBsIV

  • Administrator
  • MVP
  • *
  • Posts: 36681
  • It's obsessive.
    • View Profile
    • OBsIV's Blog
Re: XIM APEX BETA [Firmware 20191130] (**LATEST**)
« Reply #15 on: 12:20 PM - 12/02/19 »
Okay im glad yall did this thanks but , can i still use any ads delay for this as long as my deactivation is 224 or do they have to be the same value

They don't need to be the same value. I find 224ms works well for both in general given the in-game footage analysis I did, but, you may want to try something different. Keep in mind though that if the deactivation value is too high, you'll definitely feel like the reticle is jumping during the transition back to Hip since your XIM will be holding ADS translation longer than the game is.
Get the most out of your XIM APEX, read the XIM APEX Support FAQ.

Offline Nuki

  • Member
  • *
  • Posts: 11
    • View Profile
  • PSN ID: iNsAnE_Nuki
Re: XIM APEX BETA [Firmware 20191130] (**LATEST**)
« Reply #16 on: 01:16 PM - 12/02/19 »
Thanks for the new beta,

is just the wired connection fixed for Elite 2?

thx
Nuki


Yes, this doesn't yet enable Bluetooth crossover for the Elite 2.

And the wireless support with usb Stick?

Offline OBsIV

  • Administrator
  • MVP
  • *
  • Posts: 36681
  • It's obsessive.
    • View Profile
    • OBsIV's Blog
Re: XIM APEX BETA [Firmware 20191130] (**LATEST**)
« Reply #17 on: 03:53 PM - 12/02/19 »
We don't yet support wireless of any kind with the Elite 2 yet.
Get the most out of your XIM APEX, read the XIM APEX Support FAQ.

Offline TGC

  • Member
  • *
  • Posts: 9
    • View Profile
Re: XIM APEX BETA [Firmware 20191130] (**LATEST**)
« Reply #18 on: 05:22 PM - 12/02/19 »
when using with the toogle option the deactivation delay does not work properly it just delays releasing the ads button.

disabled with the ads button itself or some deactivation key


Offline OBsIV

  • Administrator
  • MVP
  • *
  • Posts: 36681
  • It's obsessive.
    • View Profile
    • OBsIV's Blog
Re: XIM APEX BETA [Firmware 20191130] (**LATEST**)
« Reply #19 on: 12:07 AM - 12/04/19 »
macOS version has been released.
Get the most out of your XIM APEX, read the XIM APEX Support FAQ.

Offline iTzMoeZ

  • Member
  • *
  • Posts: 1
    • View Profile
  • PSN ID: iTzMoeZ
Re: XIM APEX BETA [Firmware 20191130] (**LATEST**)
« Reply #20 on: 03:57 AM - 12/04/19 »
Do i change the deactivation delay after i downloaded beta firmware (20191130) ??

Offline MOHVWK

  • Member
  • *
  • Posts: 3
    • View Profile
  • Gamertag: MOHVWK BLVCK
  • PSN ID: MOHVWK_BLVCK
Re: XIM APEX BETA [Firmware 20191130] (**LATEST**)
« Reply #21 on: 01:49 PM - 12/04/19 »
macOS version has been released.

Appreciate it. Using now.

Offline TGC

  • Member
  • *
  • Posts: 9
    • View Profile
Re: XIM APEX BETA [Firmware 20191130] (**LATEST**)
« Reply #22 on: 02:09 PM - 12/04/19 »
macOS version has been released.

hi, OBsIV
some way to help toogle users with delay?

Offline ItZ_Me_Not_You

  • Member
  • *
  • Posts: 39
    • View Profile
Re: XIM APEX BETA [Firmware 20191130] (**LATEST**)
« Reply #23 on: 05:05 PM - 12/04/19 »
2 times today i got the sprint bug in Apex, i will look through more about it and i will post an update.

Apex Legends ST with 25 SAB on hip

Offline akirakurosawa2

  • Member
  • *
  • Posts: 4
    • View Profile
Re: XIM APEX BETA [Firmware 20191130] (**LATEST**)
« Reply #24 on: 01:07 AM - 12/05/19 »
Ok. I have now updated to latest 20191130 beta Firmware, and latest firmware for the Elite Series 2 controller. I can not get the wired configuration to work.

I have the following:

1) PS4, with controller connection set to wired (though wireless still works if I hit a PS button I have found)
2) Dualshock 4 plugged into xim hub, port 3.
3) Xbox Elite plugged into xim hub, port 1.
4) Hub plugged into xim apex.
5) Xim Apex plugged into PS4.

I can  see on the application manager that the xim recognizes an xbox controller. I load a crossover controller configuration and no buttons are recognized if I hit them on the elite controller. If I hit the DS4 buttons, the manager shows the inputs.

Not sure what to try?

Offline RML

  • MVP
  • *
  • Posts: 6338
  • Live Different
    • View Profile
Re: XIM APEX BETA [Firmware 20191130] (**LATEST**)
« Reply #25 on: 07:46 AM - 12/05/19 »
macOS version has been released.

hi, OBsIV
some way to help toogle users with delay?

I don't think this is going to be possible with delays.

I will look when I get back though.
ADVANCED SETUPS


Offline Andomgo

  • Member
  • *
  • Posts: 2
    • View Profile
Re: XIM APEX BETA [Firmware 20191130] (**LATEST**)
« Reply #26 on: 05:52 PM - 12/05/19 »
Same problem here. I just bought xim apex 2 days ago to use my elite 2 with PS4 and it didn't work. Hopefully there's a solution, if not i have to return it.
Ok. I have now updated to latest 20191130 beta Firmware, and latest firmware for the Elite Series 2 controller. I can not get the wired configuration to work.

I have the following:

1) PS4, with controller connection set to wired (though wireless still works if I hit a PS button I have found)
2) Dualshock 4 plugged into xim hub, port 3.
3) Xbox Elite plugged into xim hub, port 1.
4) Hub plugged into xim apex.
5) Xim Apex plugged into PS4.

I can  see on the application manager that the xim recognizes an xbox controller. I load a crossover controller configuration and no buttons are recognized if I hit them on the elite controller. If I hit the DS4 buttons, the manager shows the inputs.

Not sure what to try?

Offline PUBzZz

  • MVP
  • *
  • Posts: 743
    • View Profile
Re: XIM APEX BETA [Firmware 20191130] (**LATEST**)
« Reply #27 on: 08:37 AM - 12/06/19 »
Coming from the Xim 4 using the MW STv2 (2x) at 1.5 in game to the Apex using the STv1 at 1.33 in game on this firmware took me a few days to dial in my settings.

This Beta firmware does the trick fixing the transition issue as long as you keep it under 1.3(3) in game. In my opinion feels better with Default sync than OFF.  Also had to use some curves, Smoothing and Steady Aim. 

Hopefully one day we will be graced by OBsIV with the STv2 because I think I can get more "Juice" out of that with this firmware than I can with the STv1.  It's all about the squeeze.

Either way thanks for the Beta it's a good step forward as it got me back on the Apex.
PS4 / Xbox One
Xim Apex / Xim 4
Cooler Master MM710 16k @1000hz
Zowie G-TF SPAWN PAD
Netduma to OpenWRT "Cake/PieceOfCake"
BenQ XL2420T
Astro A40 + Mixamp

Offline akirakurosawa2

  • Member
  • *
  • Posts: 4
    • View Profile
Re: XIM APEX BETA [Firmware 20191130] (**LATEST**)
« Reply #28 on: 04:16 AM - 12/07/19 »
Finally got wired elite 2 to work. Had to plug xim back into PC and restore to defaults (blowing away all configs). Now works great with a cross over controller config.

Ok. I have now updated to latest 20191130 beta Firmware, and latest firmware for the Elite Series 2 controller. I can not get the wired configuration to work.

I have the following:

1) PS4, with controller connection set to wired (though wireless still works if I hit a PS button I have found)
2) Dualshock 4 plugged into xim hub, port 3.
3) Xbox Elite plugged into xim hub, port 1.
4) Hub plugged into xim apex.
5) Xim Apex plugged into PS4.

I can  see on the application manager that the xim recognizes an xbox controller. I load a crossover controller configuration and no buttons are recognized if I hit them on the elite controller. If I hit the DS4 buttons, the manager shows the inputs.

Not sure what to try?
« Last Edit: 03:48 PM - 12/09/19 by akirakurosawa2 »

Offline Silk

  • Member
  • *
  • Posts: 52
    • View Profile
Re: XIM APEX BETA [Firmware 20191130] (**LATEST**)
« Reply #29 on: 09:49 AM - 12/07/19 »
Do we need to set up a deactivation key or does it do it automatically when you release your ads button?