New Fortnite st released

[Alcapone007]

Mhhm New St feels very Bad if i switch to old St IT feels much better. I use the correct settings and 3200dpi 1000hz sync off anybody have same Problems??

[x Mayze x]

Mhhm New St feels very Bad if i switch to old St IT feels much better. I use the correct settings and 3200dpi 1000hz sync off anybody have same Problems??

Initial playtime with new ST (with updated in game settings) and I tend to agree. The previous ST "feels" better. New ST feels floaty. Glad I didn't delete the old ST. 

[Stalker]

Mhhm New St feels very Bad if i switch to old St IT feels much better. I use the correct settings and 3200dpi 1000hz sync off anybody have same Problems??

Initial playtime with new ST (with updated in game settings) and I tend to agree. The previous ST "feels" better. New ST feels floaty. Glad I didn't delete the old ST. 

Don’t know what you taking about guys. Feels amazing. You didn’t play enough with new one, almost two weeks in old one you played of course it feels different. Give a time. My ar shots is on point. Flicks are easy you sing off sync for hip and common for ads.

[Neo1089]

Mhhm New St feels very Bad if i switch to old St IT feels much better. I use the correct settings and 3200dpi 1000hz sync off anybody have same Problems??

Initial playtime with new ST (with updated in game settings) and I tend to agree. The previous ST "feels" better. New ST feels floaty. Glad I didn't delete the old ST. 

Don’t know what you taking about guys. Feels amazing. You didn’t play enough with new one, almost two weeks in old one you played of course it feels different. Give a time. My ar shots is on point. Flicks are easy you sing off sync for hip and common for ads.

You made a typo in the last sentence so I m not sure what you mean, what sync are you using for HIP and ADS? Do you use Hip translator on ADS? And finally, DPI and polling?

[Xdrqgol]

Mhhm New St feels very Bad if i switch to old St IT feels much better. I use the correct settings and 3200dpi 1000hz sync off anybody have same Problems??

Initial playtime with new ST (with updated in game settings) and I tend to agree. The previous ST "feels" better. New ST feels floaty. Glad I didn't delete the old ST. 

Don’t know what you taking about guys. Feels amazing. You didn’t play enough with new one, almost two weeks in old one you played of course it feels different. Give a time. My ar shots is on point. Flicks are easy you sing off sync for hip and common for ads.

You made a typo in the last sentence so I m not sure what you mean, what sync are you using for HIP and ADS? Do you use Hip translator on ADS? And finally, DPI and polling?

he said:

off sync for hip and common for ads

Hip SYNC OFF
ADS SYNC COMMON

[Alcapone007]

I make a complete New cfg without paste and same Problem... The St feels floaty if i switch to old one the reaction is much better. With old St hip 130 and With New St 200 and very Bad feeling.

[mist4fun]

- Controller Sensitivity Page -
Use Advanced Options: On

Advanced - Look Sensitivity:
Look Horizontal Speed: 100%
Look Vertical Speed: 100%
Turning Horizontal Boost: 0%
Turning Vertical Boost: 0%
Turning Boost Ramp Time should this be 0.00Seconds or left as default??

Advanced - ADS Sensitivity:
Look Horizontal Speed: 100%
Look Vertical Speed: 100%
Turning Horizontal Boost: 0%
Turning Vertical Boost: 0%
Turning Boost Ramp Time should this be 0.00Seconds or left as default??

Advanced - Sensitivity:
Look Dampening Time: 0
Look Input Curve: Exponential
Use Legacy Controls: Off

- Controller Page -
Button Layout: Combat ProThis needs changing to Builder Pro
Right Analog Stick Deadzone: Default (Xbox: .20, PS4 .12)


Everything in red needs answering. @Mist @OBSIV

Boost Ramp Time isn't included because it's not used when using the settings listed. Ramp Time is disabled with Boost set to 0% so you can have Ramp Time set to anything because it isn't used.

We had supported Builder Pro in earlier versions I believe but the community requested Combat Pro so it was changed. There would need to be a large demand to switch back.

[Neo1089]

- Controller Sensitivity Page -
Use Advanced Options: On

Advanced - Look Sensitivity:
Look Horizontal Speed: 100%
Look Vertical Speed: 100%
Turning Horizontal Boost: 0%
Turning Vertical Boost: 0%
Turning Boost Ramp Time should this be 0.00Seconds or left as default??

Advanced - ADS Sensitivity:
Look Horizontal Speed: 100%
Look Vertical Speed: 100%
Turning Horizontal Boost: 0%
Turning Vertical Boost: 0%
Turning Boost Ramp Time should this be 0.00Seconds or left as default??

Advanced - Sensitivity:
Look Dampening Time: 0
Look Input Curve: Exponential
Use Legacy Controls: Off

- Controller Page -
Button Layout: Combat ProThis needs changing to Builder Pro
Right Analog Stick Deadzone: Default (Xbox: .20, PS4 .12)


Everything in red needs answering. @Mist @OBSIV

Boost Ramp Time isn't included because it's not used when using the settings listed. Ramp Time is disabled with Boost set to 0% so you can have Ramp Time set to anything because it isn't used.

We had supported Builder Pro in earlier versions I believe but the community requested Combat Pro so it was changed. There would need to be a large demand to switch back.

Hey Mist! Could you answer one last thing, what Sync should we be using on HIP and ADS to get the most out of your ST?

And noob question, why does it matter if you trained with combat pro or builder pro? Can’t understand why that would be important

[McMotts]

New update feels a lot smoother than old ST, thanks for all your work.  I may be wrong on this but I'm pretty sure no one is using combat pro anymore and everyone is using either builder pro or custom. Idk if that makes a difference for the ST but combat pro is just inferior in fortnite right now.  I am curious if there are any thoughts on building and edit sens.  I have mine on 1.8 and 2.0.  If feels fine but is there any reason that I should change it for new ST.

[Xdrqgol]

- Controller Sensitivity Page -
Use Advanced Options: On

Advanced - Look Sensitivity:
Look Horizontal Speed: 100%
Look Vertical Speed: 100%
Turning Horizontal Boost: 0%
Turning Vertical Boost: 0%
Turning Boost Ramp Time should this be 0.00Seconds or left as default??

Advanced - ADS Sensitivity:
Look Horizontal Speed: 100%
Look Vertical Speed: 100%
Turning Horizontal Boost: 0%
Turning Vertical Boost: 0%
Turning Boost Ramp Time should this be 0.00Seconds or left as default??

Advanced - Sensitivity:
Look Dampening Time: 0
Look Input Curve: Exponential
Use Legacy Controls: Off

- Controller Page -
Button Layout: Combat ProThis needs changing to Builder Pro
Right Analog Stick Deadzone: Default (Xbox: .20, PS4 .12)


Everything in red needs answering. @Mist @OBSIV

Boost Ramp Time isn't included because it's not used when using the settings listed. Ramp Time is disabled with Boost set to 0% so you can have Ramp Time set to anything because it isn't used.

We had supported Builder Pro in earlier versions I believe but the community requested Combat Pro so it was changed. There would need to be a large demand to switch back.

I used Builder PRO since day 1 ...not sure WHO recommended Combat PRO...this is by far inferior to Builder PRO

could we get a vote and have it changed please?

If people think Combat PRO is better, they should definitely change to Builder PRO and try it. THat is night and day difference in game.

[Bado]

- Controller Sensitivity Page -
Use Advanced Options: On

Advanced - Look Sensitivity:
Look Horizontal Speed: 100%
Look Vertical Speed: 100%
Turning Horizontal Boost: 0%
Turning Vertical Boost: 0%
Turning Boost Ramp Time should this be 0.00Seconds or left as default??

Advanced - ADS Sensitivity:
Look Horizontal Speed: 100%
Look Vertical Speed: 100%
Turning Horizontal Boost: 0%
Turning Vertical Boost: 0%
Turning Boost Ramp Time should this be 0.00Seconds or left as default??

Advanced - Sensitivity:
Look Dampening Time: 0
Look Input Curve: Exponential
Use Legacy Controls: Off

- Controller Page -
Button Layout: Combat ProThis needs changing to Builder Pro
Right Analog Stick Deadzone: Default (Xbox: .20, PS4 .12)


Everything in red needs answering. @Mist @OBSIV

Boost Ramp Time isn't included because it's not used when using the settings listed. Ramp Time is disabled with Boost set to 0% so you can have Ramp Time set to anything because it isn't used.

We had supported Builder Pro in earlier versions I believe but the community requested Combat Pro so it was changed. There would need to be a large demand to switch back.

Would it hurt to use Legacy 🥶

[TammyGucci]

Yeah not to be difficult but nobody uses Combat. Builder pro is standard.

[Verone-]

I don't think anything would be different between combat and builder. Think Mist is mistaking the 2 arround. I think we went from something like quick builder to combat pro to builder pro. Nobody using combat pro after builder pro came out anymore.
Aiming shouldn't change, only bindings I assume

[JustPeze]

Would it hurt to use Legacy 🥶

.    Yes Legacy isn't trained with the new ST, Use the new recommend settings then adjust XIM settings to what you prefer also there will be a slowdown on your ramps cause we cant use just a HIP profile anymore as the Ingame HIP/ADS now use a separate look mechanic. If you want to avoid the slowdown you will now either have to use a new button for ramps. I use sniper button on the Logitech G502 or use the previous ST with Legacy settings.

[JustPeze]

I don't think anything would be different between combat and builder. Think Mist is mistaking the 2 arround. I think we went from something like quick builder to combat pro to builder pro. Nobody using combat pro after builder pro came out anymore.
Aiming shouldn't change, only bindings I assume

.            Your right this wont affect anything, I was just pointing out that it says "Combat Pro" in the recommended settings. Builder Pro is 100% the one to choose.