XIM Community

Apex RMLegends Advanced Setup (12/22/20)  (Read 55821 times)

Offline RML

  • MVP
  • *
  • Posts: 7198
  • AKA "KO"
    • View Profile
  • Gamertag: EfiLNikuFeciN
  • PSN ID: Cancelle_D
Re: Apex RMLegends Advanced Setup (20190727)
« Reply #30 on: 12:18 PM - 07/27/19 »
whats the difference between the three curves

I just posted pics.. so you can see for yourself.

They offer various levels of acceleration to overcome Aim Assist or make Hip turning feel snappy.

Your choice!

Offline Happy Camper Cavalry

  • Member
  • *
  • Posts: 237
  • Only the best
    • View Profile
  • Gamertag: 12 Current Members
Re: Apex RMLegends Advanced Setup (20190727)
« Reply #31 on: 12:34 PM - 07/27/19 »
Here’s my Full Setup:

Apex Legends ST
Default settings (follow mists guide)
In game sens at 7 to keep Aim Assist active.
FOV - 90 (user choice)
12,000 dpi
1000hz
Sync off
HIP - 56 sens + Curve
ADS - 36 Sens + Curve + 1.25 y/x ratio (Y/X ratio is for recoil control only, so user choice).

Full config code: must use firmware/Manager 20190702 or 19.


Code: [Select]
>>> XIM APEX [RMLegends] START COPY >>> X5C: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:X5C
<<< XIM APEX END COPY <<<


Here are the HIP/ADS curves. Some may like to use these only with ADS.

Current HIP Curve:
Code: [Select]
   >>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:gACBLIJYg4SETIUUhdyHbIg0iPyJxItUjByM5I2sjnSQBJDMkZSSXJMkk+yVfJZElwyX1JicmWSaLJu8nISdTJ4UntyfpKBsoTSixKOMpFSlHKXkpqynEKcQpxCnECcQJxAnECcQ:X5BC
<<< XIM APEX END COPY <<<



Current ADS Curve:
Code: [Select]
   >>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:gACBLIJYgyCD6ISwhkCHCIfQiJiJYIrwi7iMgI1IjhCPoJBokTCR+JLAk4iVGJXglqiXcJg4mQCZyJtYnCCc6J2wnnifQKAIoNCiYKMoo/CkuKWApkinEKcQpxCnECcQJxAnECcQ:X5BC
<<< XIM APEX END COPY <<<   



Alternate HIP/ADS Curve (even less Aim Assist):
Code: [Select]
  >>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:gACBLIJYg4SEsIXchwiH0IiYiWCKKIu4jUiOEI7Yj6CQaJH4k4iUUJUYleCWqJg4mciakJtYnCCc6J54oAig0KGYomCjKKPwpYCnEKcQpxCnEKcQpxCnEKcQpxCnECcQJxAnECcQ:X5BC
<<< XIM APEX END COPY <<< 


Cheers!
Tried this out. Good job man. That's what's nice about the xim. You can pick the way you want to play. RML as always has created great configs to harness AA and to make the game feel as smooth and constant.
Mists default STs are great.

IMHO if you are a slow, methodical shooter then use the default. If you run around and like aim assist then RML all day, and if you've been watching too many shroud and dizzy videos then go ahead and use my setting LOL hi speed little to no aim assist.
Practice Responsible Xim ownership, and disable aim assist!

Offline willemk

  • Member
  • *
  • Posts: 74
    • View Profile
  • PSN ID: willemk
Re: Apex RMLegends Advanced Setup (20190727)
« Reply #32 on: 12:48 PM - 07/27/19 »
Tried out them all, and the first one pfff amazing..

Offline JMurdock

  • Member
  • *
  • Posts: 25
    • View Profile
Re: Apex RMLegends Advanced Setup (20190727)
« Reply #33 on: 04:50 PM - 07/27/19 »
I folllowed the exact config with the curves and found it to be jittery.  I added 3 smoothing to both hip and ads which removed the jitter. Do you think there will be any adverse effects from adding smoothing to this config?

Offline RML

  • MVP
  • *
  • Posts: 7198
  • AKA "KO"
    • View Profile
  • Gamertag: EfiLNikuFeciN
  • PSN ID: Cancelle_D
Re: Apex RMLegends Advanced Setup (20190727)
« Reply #34 on: 05:05 PM - 07/27/19 »
I folllowed the exact config with the curves and found it to be jittery.  I added 3 smoothing to both hip and ads which removed the jitter. Do you think there will be any adverse effects from adding smoothing to this config?

It will add a little more Aim Assist, but shouldn’t be too noticeable. You can also try these with different Syncs if you’d like.

Also, are you guys trying these curves on HIP as well? I find them Really good with Hip. Especially #4, super crisp, responsive and ACCURATE!. Makes Linear feel sluggish and floaty in comparison.

Offline JMurdock

  • Member
  • *
  • Posts: 25
    • View Profile
Re: Apex RMLegends Advanced Setup (20190727)
« Reply #35 on: 05:17 PM - 07/27/19 »
I folllowed the exact config with the curves and found it to be jittery.  I added 3 smoothing to both hip and ads which removed the jitter. Do you think there will be any adverse effects from adding smoothing to this config?

It will add a little more Aim Assist, but shouldn’t be too noticeable. You can also try these with different Syncs if you’d like.

Also, are you guys trying these curves on HIP as well? I find them Really good with Hip. Especially #4, super crisp, responsive and ACCURATE!. Makes Linear feel sluggish and floaty in comparison.

If I’m the only one getting jitter and having to add smoothing, I feel like I must be doing something wrong? I’ve checked all the settings over and over.
I’m running curve #2 on hip and #1 on ads, as suggested. The jitter is from the curves bc when I removed the curves, the jitter goes away. I’ll try #4 on hip and see if it’s better. Thank you.

Offline goaty

  • Member
  • *
  • Posts: 149
    • View Profile
Re: Apex RMLegends Advanced Setup (20190727)
« Reply #36 on: 05:30 PM - 07/27/19 »
Off sync requires smoothing for me as well

Offline WarCat

  • Member
  • *
  • Posts: 104
    • View Profile
Re: Apex RMLegends Advanced Setup (20190727)
« Reply #37 on: 05:32 PM - 07/27/19 »
I folllowed the exact config with the curves and found it to be jittery.  I added 3 smoothing to both hip and ads which removed the jitter. Do you think there will be any adverse effects from adding smoothing to this config?

It will add a little more Aim Assist, but shouldn’t be too noticeable. You can also try these with different Syncs if you’d like.

Also, are you guys trying these curves on HIP as well? I find them Really good with Hip. Especially #4, super crisp, responsive and ACCURATE!. Makes Linear feel sluggish and floaty in comparison.

I’m using the #1 and #2 as suggested for HIP/ADS, man! I was using the peacekeeper and g7, both of which I’ve not had the best track record with, only had a 1x sight on the g7 to make matters worse... peacekeeper I’ve notoriously gotten only 8 or 20 damage with when hip firing, it’s like the slowdown was slowing me down too much when firing from the hip or something. ANYWAYS.. with your curves I dropped a 3,000 damage game primarily from using the peacekeeper with at least 40+ damage per shot, most of the time over 90 damage! Felt like a whole new gun. I didn’t even have a shotgun bolt for it and I was wiping squads. Good work RML!

Offline RML

  • MVP
  • *
  • Posts: 7198
  • AKA "KO"
    • View Profile
  • Gamertag: EfiLNikuFeciN
  • PSN ID: Cancelle_D
Re: Apex RMLegends Advanced Setup (20190727)
« Reply #38 on: 05:49 PM - 07/27/19 »
I folllowed the exact config with the curves and found it to be jittery.  I added 3 smoothing to both hip and ads which removed the jitter. Do you think there will be any adverse effects from adding smoothing to this config?

It will add a little more Aim Assist, but shouldn’t be too noticeable. You can also try these with different Syncs if you’d like.

Also, are you guys trying these curves on HIP as well? I find them Really good with Hip. Especially #4, super crisp, responsive and ACCURATE!. Makes Linear feel sluggish and floaty in comparison.

If I’m the only one getting jitter and having to add smoothing, I feel like I must be doing something wrong? I’ve checked all the settings over and over.
I’m running curve #2 on hip and #1 on ads, as suggested. The jitter is from the curves bc when I removed the curves, the jitter goes away. I’ll try #4 on hip and see if it’s better. Thank you.

The jitter is because of multiple things. Sync off would be the number 1 culprit. I only feel some jitter with micro movements though. I’d suggest using smoothing for the jitter. If that’s not enough try lower dpi, if still not enough use default sync.

Offline Omarf826

  • Member
  • *
  • Posts: 126
    • View Profile
Re: Apex RMLegends Advanced Setup (20190727)
« Reply #39 on: 08:14 PM - 07/27/19 »
The original curves for hip/ads are the best, i have tested both curves out, and i use 1 smoothing w the off sync. This is now my main config, thank you RML you really are the GOAT  ;)

tankttv

  • Guest
Re: Apex RMLegends Advanced Setup (20190727)
« Reply #40 on: 09:35 PM - 07/27/19 »
Which curve are you using for blackout?

I folllowed the exact config with the curves and found it to be jittery.  I added 3 smoothing to both hip and ads which removed the jitter. Do you think there will be any adverse effects from adding smoothing to this config?

It will add a little more Aim Assist, but shouldn’t be too noticeable. You can also try these with different Syncs if you’d like.

Also, are you guys trying these curves on HIP as well? I find them Really good with Hip. Especially #4, super crisp, responsive and ACCURATE!. Makes Linear feel sluggish and floaty in comparison.

If I’m the only one getting jitter and having to add smoothing, I feel like I must be doing something wrong? I’ve checked all the settings over and over.
I’m running curve #2 on hip and #1 on ads, as suggested. The jitter is from the curves bc when I removed the curves, the jitter goes away. I’ll try #4 on hip and see if it’s better. Thank you.

The jitter is because of multiple things. Sync off would be the number 1 culprit. I only feel some jitter with micro movements though. I’d suggest using smoothing for the jitter. If that’s not enough try lower dpi, if still not enough use default sync.

Offline jujupaster

  • Member
  • *
  • Posts: 246
    • View Profile
Re: Apex RMLegends Advanced Setup (20190727)
« Reply #41 on: 01:48 AM - 07/28/19 »
Pls give me setting in game.. Thanks

Offline HypeR

  • Member
  • *
  • Posts: 338
    • View Profile
Re: Apex RMLegends Advanced Setup (20190727)
« Reply #42 on: 04:52 AM - 07/28/19 »
@rml Would you use sab as a keyboard User for ur settings?

Offline RML

  • MVP
  • *
  • Posts: 7198
  • AKA "KO"
    • View Profile
  • Gamertag: EfiLNikuFeciN
  • PSN ID: Cancelle_D
Re: Apex RMLegends Advanced Setup (20190727)
« Reply #43 on: 06:44 AM - 07/28/19 »
Which curve are you using for blackout?

I use #4 for Hip and #1 for ADS.

In Team Death Match I use #4 and #4 for the fast pace.


Pls give me setting in game.. Thanks

I already did in the OP.


@rml Would you use sab as a keyboard User for ur settings?

I'm probably the last person you'd want to talk to about SAB. I turn it "OFF" not even ZERO, OFF! But I'm a Nav user and I know others have complained about stutter with SAB.

Offline kjordz

  • Member
  • *
  • Posts: 7
    • View Profile
  • Gamertag: kjordz x
Re: Apex RMLegends Advanced Setup (20190727)
« Reply #44 on: 07:18 AM - 07/28/19 »
The sensitivity on this is insanely high, tried playing a game but had to switch it out after a few seconds.