XIM Community

Curveless Apex Legends Settings for Stable Aim & Decent Aim Assist Manip  (Read 8385 times)

Offline pyro90294

  • Member
  • *
  • Posts: 15
    • View Profile
  • PSN ID: pyro90294
Hey guys! Just wanted to share some Vanilla settings that Iíve found success with and that feel very consistent. To start I am using a Logitech G502 Proteus Spectrum (not the hero) at 12k DPI with 1000hz polling. Using a steel series qck mousepad as well. My in-game settings are 7 HIP, 6 ADS (donít reccomend using 8 as it severely cripples the aim assist mechanic with XIM for some reason) A Classic response curve with NO look deadzone and a Small Movement Deadzone. My XIM settings are 16 Hip with 0.94 XY ratio and 30 boost with  30 SAB. 10 ADS with 1.11 XY ratio and 60 boost with 60 SAB. My Synchronization settings are on Default for both profiles and my ADS delay is set to 100 with SAT checked. I find this may be helpful: altering the SAB to be higher with the ADS profile seems to better allow me to enter and exit the AA bubble in this game with the XY ratio allowing me to compensate for vertical recoil. My SAB and Boost values being the same are purely coincidental but it feels great imo. Give these settings a go and see if it helps the somewhat nonexistent aim assist that some users have affforementioned in other posts. Slay and Pray.

Offline Omarf826

  • Member
  • *
  • Posts: 126
    • View Profile
Ill try this out tonight when i get home, your setup seems interesting...

Offline pyro90294

  • Member
  • *
  • Posts: 15
    • View Profile
  • PSN ID: pyro90294
Tell me how it performs for you and any tweaks youíd make

Offline El1miNate_

  • Member
  • *
  • Posts: 38
    • View Profile
I try your setting, with my 4k dpi, 1000hz mouse and 500hz apex.
I use your setting.
Feel Amazing, first game. Champion. 8 kill easy...

Thanks man

Offline vanish

  • Member
  • *
  • Posts: 25
    • View Profile
hey,for me default worked best til now. Gonna try your settings later ! Thanks for sharing

Offline ubelai

  • Member
  • *
  • Posts: 53
    • View Profile
What firmware is this on?

Offline Thecp666

  • Member
  • *
  • Posts: 1
    • View Profile
  • PSN ID: Thecp666
Hey guys! Just wanted to share some Vanilla settings that Iíve found success with and that feel very consistent. To start I am using a Logitech G502 Proteus Spectrum (not the hero) at 12k DPI with 1000hz polling. Using a steel series qck mousepad as well. My in-game settings are 7 HIP, 6 ADS (donít reccomend using 8 as it severely cripples the aim assist mechanic with XIM for some reason) A Classic response curve with NO look deadzone and a Small Movement Deadzone. My XIM settings are 16 Hip with 0.94 XY ratio and 30 boost with  30 SAB. 10 ADS with 1.11 XY ratio and 60 boost with 60 SAB. My Synchronization settings are on Default for both profiles and my ADS delay is set to 100 with SAT checked. I find this may be helpful: altering the SAB to be higher with the ADS profile seems to better allow me to enter and exit the AA bubble in this game with the XY ratio allowing me to compensate for vertical recoil. My SAB and Boost values being the same are purely coincidental but it feels great imo. Give these settings a go and see if it helps the somewhat nonexistent aim assist that some users have affforementioned in other posts. Slay and Pray.

Thank you so much it feels very good!

For those who are lazy

Quote
>>> XIM APEX [Apex Legends test ] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

Offline B28rian

  • Member
  • *
  • Posts: 26
    • View Profile
  • Gamertag: Zero karma
I donít have half these options like boost?  Is this for the Xim Apex?

Offline teun de dreun

  • Member
  • *
  • Posts: 10
    • View Profile
  • PSN ID: Teun_de_dreun
I donít have half these options like boost?  Is this for the Xim Apex?

Download beta firmware https://community.xim.tech/index.php?board=77.0

Offline B28rian

  • Member
  • *
  • Posts: 26
    • View Profile
  • Gamertag: Zero karma
Is that for the xim 4 or apex or doesnít it not matter? 

Offline teun de dreun

  • Member
  • *
  • Posts: 10
    • View Profile
  • PSN ID: Teun_de_dreun
Is that for the xim 4 or apex or doesnít it not matter?

That's for the xim apex

Offline itsnotdelivery

  • Member
  • *
  • Posts: 1
    • View Profile
Hey @pyro90294 - Is SAB referring to your Steady Aim number? The moment I put anything over 5.0 on Steady Aim my mouse movements stop detecting diagonally. 30 and 60 were unplayable on my end. Did you mean 3.0 and 6.0?

Offline sonicwall4500

  • Member
  • *
  • Posts: 62
    • View Profile
  • PSN ID: Sonicwall_4500
Hey @pyro90294 - Is SAB referring to your Steady Aim number? The moment I put anything over 5.0 on Steady Aim my mouse movements stop detecting diagonally. 30 and 60 were unplayable on my end. Did you mean 3.0 and 6.0?

SAB = simulate analog behavior under movement section
Logitech Gpro mouse, Logitech G13 keypad. Benq RL2455 Monitor. PS3/PS4. Logitech G440 hard mouse pad. XIM APEX, 12k DPI, 1000 polling

Offline artryt

  • Member
  • *
  • Posts: 18
    • View Profile
What firmware you running please? I cant see sab under the movement section. the firmware link is for the xim4 and the config wont copy paste over it errors, thanks.

Offline vanish

  • Member
  • *
  • Posts: 25
    • View Profile
After playing couple of games I kinda like your config but I feel from time to time crazy delay when switching weapons and when I was walking and try to sprint.