[Apex Legends] - How To: Setup your XIM for Dial Menus - Visual Guide

[Lukino]

Hey Alan

    I am loving your set ups and attention to detail. I have a different question so sorry about that as this is apex legends thread. Your battlefield v set up is awesome but would you be able to look at new aim slow down and comment on the original post for battlefield as it doesn’t feel right anymore. Thank you. I use your guide from battlefield the set dials for apex legends. Appreciate the help. Thank you

[JDSNatt]

Ignore my sensitivities as they are not all dialed in. I'm also using mouse tilt left as my ping if you see the [.

Code: [Select]

>>> XIM APEX [Apex Legends] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

Doesn't seem to work for me, just errors out

[lilnagle]

1. Enable Expert Configuration

2. Create a new Config for Apex Legends
The official ST is not release yet. We are going to use Titan Fall 2 for this example. You can do this with any other Config ST.


3. Mapping.
Customize your buttons ( Actions Section )

We are going to use the default mapping as an example.
Use your own keys to map actions following the next instructions.


Save Changes.

Dial Selection Methods Explained
METHOD 1. Analog Stick

Uses Analog stick to select options on the dial menu.
TIP: Make sure the sub-config activation button allows you to keep your thumb on the stick.

METHOD 2. Mouse + Turn Assist

Select options on the dial menu by moving the mouse when the Turn Assist button is held down.

You can use a key or mouse button. Every single movement you made while holding down the Turn Assist button, is equally to a full joystick movement on that direction. Makes easier to select with the mouse.
TIP: Make sure the sub-config activation button allows you hold both: Turn Assist button and the Activation Sub-config key.

METHOD 3. WASD keys

Select options on the dial menu by using WASD keys.
TIP: Make sure the sub-config activation button allows you to press WASD keys freely. Mouse buttons are recommended.

Creating a Ping Sub-Config


SET TO THE METHOD OF YOUR PREFERENCE


How it Works?.
Hold key G, to enter to the PING Sub-Config, in-game you will see the Ping Dial.
While holding down the key G  you can select by:

• a) Moving Analog Stick, or
• b) Moving the Mouse (AND holding Turn Assist button) or
• c) Pressing the WASD keys

Creating a Health/Armor Sub-Config


SET TO THE METHOD OF YOUR PREFERENCE


Creating a Ordnance Sub-Config


SET TO THE METHOD OF YOUR PREFERENCE


Creating a Inventory Sub-Config with Mouse Cursor
Swipe to the Right for a New Sub-Config Page.
Check the box to Enabled. Rename as: Inventory.

NOTICE: This subconfig works TOGGLE Behavior, this means you don't need to hold the activation key. In this case when you press the Inventory button XIM manager enters to Inventory Subconfig Automatically.

Is highly recommended to have a SECONDARY KEY BIND for Options/Menu to access game settings.

CURVE

Code: [Select]

>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:AAABfAL4BHQF8AdsCOgKZAvgDVwO2BBUEdATTBTIFkQXwBk8GrgcNB2wHywgqCIkI6ClHCUwJUQlWCVsJYAllCWoJbwl0CXkJfgmDCYgJjQmSCZcJnAmhCaYJqwmwCbUJugm/CcQ:X5BC
<<< XIM APEX END COPY <<<

FINAL STEPS, VERY IMPORTANT


XIM4 Quick Guide

Setting a New Sub-Config


Setting your Method for a Sub-Config
(Ping, Health/Armor, Grenades)


Inventory Sub-Config with Mouse Cursor

Code: [Select]

>>> XIM4 [Mouse Ballistics] START PASTE >>> X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANQAwADYAMAA2ACBCYHSEjZOXmpubmpmYl5WUkpGQ:X4MB <<< XIM4 END PASTE <<<

Ok so I use the Nav and g502....I have it all settup good enough right now so that when I loot a bag I can use my mouse cursor and all that BUT i have to scroll down the loot bag if they have a lot of loot with the analog on the nav....can I get it to where I can use the mouse wheel to scroll down so I dont even have to use the nav when looting a box?

[AMG]

Go to the Movement section on the Right Stick assign:
UP = Wheel Up
Down = Wheel Down

Now you can scroll down or up with the mouse wheel.

as SixShooter suggested.

[lilnagle]

thank you, tried it dont like it, not as smooth and quick as using the analog on the nav. the scroll is jittery and slow...yuck hehehe

[AMG]

I agree Nav is better for inventory navigation. Mouse requires tweaking, try different curves and sensitivity to feel better.

[DespairX2]

Bind mouse wheel up and down to your right stck for inventory cursor auxiliary. This allows you to scroll if you use in use inventory cursor auxiliary like Alan posted earlier. And for more PC like feel bind mouse click left and right to pick up and select items.

Can you walk me through that step by step in the app? I don’t know how to do that

[undazpoon]

Try adding a 200 ms activation delay to the Ping sub-config.

For XIM4, I think analyzing the principles on this guide you can figure how to do it on XIM4, is actually more straight forward because you don't have to enable expert config, and all the options are already available.

Yes, can be done on XIM4.

I don't have my XIM4 at this moment, borrowed.

Thanks, I'll try this tonight.

[Red1986]

Thanks for this great tutorial,

everything works as it should for me but the health menu im having issues with. im not able to make it to pop up for me and i cant even use quick heal with keyboard to do just like pressing up on ps4 dpad, sometimes it register the button press if do real quick double taps but most of times it dont. i tried different keybinds with no luck.

any tips guys??

[Xenaph1]

When I setup the inventory button, I can’t move my mouse, I need to use the keyboard 9 time on 10. Sometimes it’s is working...and I setup everything like screenshot.

Anyone have the same issue ?

Also when I ue « P » button to go in inventory screen, I need to double clic to enter in the menu, probably this is why I can’t user my mouse ? If I push « P » one time, it does not work...

Thanks

[PJHudson]

Hi everyone, great guide thanks, I can set everything up but I've come across a few teething/performance problems, I was hoping one of you fine chaps could help me out to see if I'm doing anything wrong.


1) Using mouse curser for Inventory (Setting X/A to mouse buttons method)
I have set this up however, when you use a consumable like syringe it takes you out of the menu but the sub config remains on as you can't set mouse 1 to deactivation as you might need to use mouse 1 multiple times whilst in the menu. Any work arounds?

2) I can't set this up properly for looting, it goes haywire trying to active it,is it because you have to hold X down? FYI I have it set as a secondary reload Anyone else have this problem?


3) Using W for sprint (slightly different topic)

I love this work around, but it means you can walk forward without cancelling using a consumables, shield cell etc. Anything I can do?


Thanks in advance

[Teckx]

does this guide still apply with the new apex legends ST?

[Red1986]

does this guide still apply with the new apex legends ST?

Yes

[danemanu]

Why can't I set "F" as inventory??? so strange

[Teckx]

Would this also work for fortnite inventory when moving items to different slots ?