XIM Community

Xim4 problem I think  (Read 479 times)

Offline Antec800

  • Member
  • *
  • Posts: 259
    • View Profile
  • Gamertag: Antec800
Xim4 problem I think
« on: 06:28 PM - 11/06/18 »
So Im on gold retail build but Iíve tried all beta builds Iím using a ducky one kb bu Iíve used 2 other kbs before getting this kb bc I thought all my other kbs broke. So the problem is when strafing and shooting someoneís A, or D donít respond when trying to strafe left and right but the xim manager shows the key is being pressed I have to double press the key? And someoneís when running forward and doing a certain action while holding W key it will keep on auto walking this happens happens in fort and b04 and no auto run isnít on

Offline mist4fun

  • Global Moderator
  • MVP
  • *
  • Posts: 51640
    • View Profile
Re: Xim4 problem I think
« Reply #1 on: 10:16 AM - 11/07/18 »
The XIM4 gold firmware is very outdated compared to the latest build. Could you please update using the build below?

Also, which keyboard brand+model are you using? Thanks.

You can find the latest XIM4 firmware below. Please read the instructions on the download page.

http://community.xim.tech/index.php?topic=49093.0
Have a problem with your XIM APEX? Find a solution in the XIM APEX Support FAQ
XIM APEX Quick Start Guide   |   XIM Instructional Videos

Offline Antec800

  • Member
  • *
  • Posts: 259
    • View Profile
  • Gamertag: Antec800
Re: Xim4 problem I think
« Reply #2 on: 02:07 AM - 11/09/18 »
I used the 19 build the same thing was Happening Iíve used 3 kb and all have been doing this Iím using a ducky one s now

Offline mist4fun

  • Global Moderator
  • MVP
  • *
  • Posts: 51640
    • View Profile
Re: Xim4 problem I think
« Reply #3 on: 10:17 AM - 11/09/18 »
The 19 build is intended to simulate an analog stick and may produce the movement you have described. Please factory reset using this build:

http://community.xim.tech/index.php?topic=49093.0
Have a problem with your XIM APEX? Find a solution in the XIM APEX Support FAQ
XIM APEX Quick Start Guide   |   XIM Instructional Videos

Offline Antec800

  • Member
  • *
  • Posts: 259
    • View Profile
  • Gamertag: Antec800
Re: Xim4 problem I think
« Reply #4 on: 05:04 PM - 11/09/18 »
The 19 build is intended to simulate an analog stick and may produce the movement you have described. Please factory reset using this build:

http://community.xim.tech/index.php?topic=49093.0
Iím On gold retail build currently, itís been doing this on both builds

Offline Antec800

  • Member
  • *
  • Posts: 259
    • View Profile
  • Gamertag: Antec800
Re: Xim4 problem I think
« Reply #5 on: 04:57 PM - 12/05/18 »
The 19 build is intended to simulate an analog stick and may produce the movement you have described. Please factory reset using this build:

http://community.xim.tech/index.php?topic=49093.0

So Iíve put my ducky kb in bios mode it doesnít really make a difference, tried another kb changed firmwares, factory reset no difference. Whatís happening a lot is when I ads and use a and d to strafe they wonít register and I just stand there until I press them again which is causing me to die a lot

Offline mist4fun

  • Global Moderator
  • MVP
  • *
  • Posts: 51640
    • View Profile
Re: Xim4 problem I think
« Reply #6 on: 05:07 PM - 12/05/18 »
This is a rollover issue. Some keys are ignored when three or more keys are pressed at once. The only way to resolve this is to use a keyboard with onboard rollover protection. Corsair and Logitech keyboards usually have this support.
Have a problem with your XIM APEX? Find a solution in the XIM APEX Support FAQ
XIM APEX Quick Start Guide   |   XIM Instructional Videos

Offline Antec800

  • Member
  • *
  • Posts: 259
    • View Profile
  • Gamertag: Antec800
Re: Xim4 problem I think
« Reply #7 on: 05:09 PM - 12/05/18 »
This is a rollover issue. Some keys are ignored when three or more keys are pressed at once. The only way to resolve this is to use a keyboard with onboard rollover protection. Corsair and Logitech keyboards usually have this support.
The ducky one also has nkro or 6 key with bios mode enabled so it shouldnít be a issue, donít you or obv use a ducky?

Offline mist4fun

  • Global Moderator
  • MVP
  • *
  • Posts: 51640
    • View Profile
Re: Xim4 problem I think
« Reply #8 on: 06:18 PM - 12/05/18 »
Sorry, I don't. If some keys are missed when multiple keys are pressed this is a rollover issue. Razer keyboards also have nkey rollover but only one PC with the Synapse software. I would have to guess it could be similar to this or rollover protection isn't present in bios mode.
Have a problem with your XIM APEX? Find a solution in the XIM APEX Support FAQ
XIM APEX Quick Start Guide   |   XIM Instructional Videos

Offline Antec800

  • Member
  • *
  • Posts: 259
    • View Profile
  • Gamertag: Antec800
Re: Xim4 problem I think
« Reply #9 on: 06:20 PM - 12/05/18 »
Hopefully Od1n can comment Iím pretty sure he has a ducky
« Last Edit: 08:42 PM - 12/05/18 by Antec800 »