XIM Community

BO4: Advanced Setup (Update 20190811)  (Read 128483 times)

Offline sjowiexo

  • Member
  • *
  • Posts: 4
    • View Profile
  • PSN ID: Chuwie_
Re: BO4: Advanced Setup (20181216)
« Reply #840 on: 04:55 AM - 01/25/19 »
Does anyone use these settings with XIM Link and has an active AA? I somehow can't get it to work. Works fine without Link

Offline RML

  • MVP
  • *
  • Posts: 6584
  • Live Different
    • View Profile
Re: BO4: Advanced Setup (20181216)
« Reply #841 on: 10:01 AM - 01/25/19 »
I have asked this before but still have some "problems" regarding ads delay
Im using toggle ads (toggle checkpoint) and 400ms delay is making my gun ads twice before full ads if u know what i mean.. Should i use about 70ms since thats about where the gun dont double ads?

The 20181204 firmware and manager was updated recently and it shouldíve fixed the issue (although I havenít been able to test yet). Youíll have to factory reset to download it though as itís still under the same identity.

Offline Omarf826

  • Member
  • *
  • Posts: 126
    • View Profile
Re: BO4: Advanced Setup (20181216)
« Reply #842 on: 07:26 PM - 01/25/19 »
I have asked this before but still have some "problems" regarding ads delay
Im using toggle ads (toggle checkpoint) and 400ms delay is making my gun ads twice before full ads if u know what i mean.. Should i use about 70ms since thats about where the gun dont double ads?

The 20181204 firmware and manager was updated recently and it shouldíve fixed the issue (although I havenít been able to test yet). Youíll have to factory reset to download it though as itís still under the same identity.

Wait... , so i i have been using the old 204  version from the getgo the whole time??!  :-[ 

And now theres a renewed version of 204, if i understood correctly??  If thats the case no wonder why my aiming has been wonky lately :O . How do we factory reset, and go about this issue?

Offline jeffpaw96

  • Member
  • *
  • Posts: 29
    • View Profile
Re: BO4: Advanced Setup (20181216)
« Reply #843 on: 02:19 PM - 01/26/19 »
I have asked this before but still have some "problems" regarding ads delay
Im using toggle ads (toggle checkpoint) and 400ms delay is making my gun ads twice before full ads if u know what i mean.. Should i use about 70ms since thats about where the gun dont double ads?

The 20181204 firmware and manager was updated recently and it shouldíve fixed the issue (although I havenít been able to test yet). Youíll have to factory reset to download it though as itís still under the same identity.

Wait... , so i i have been using the old 204  version from the getgo the whole time??!  :-[ 

And now theres a renewed version of 204, if i understood correctly??  If thats the case no wonder why my aiming has been wonky lately :O . How do we factory reset, and go about this issue?
Download the latest firmware and just press the factory reset button and it will both update you and wipe your xim. Dont use the update firmware button.

Offline InZane

  • Member
  • *
  • Posts: 421
    • View Profile
Re: BO4: Advanced Setup (20181216)
« Reply #844 on: 02:37 PM - 01/26/19 »
Will this wipe all my game configs?
Xbox One X | XIM APEX | Glorious Model O/G502 | QPAD MK-90 | Astro A40

Offline Omarf826

  • Member
  • *
  • Posts: 126
    • View Profile
Re: BO4: Advanced Setup (20181216)
« Reply #845 on: 03:53 PM - 01/26/19 »
I have asked this before but still have some "problems" regarding ads delay
Im using toggle ads (toggle checkpoint) and 400ms delay is making my gun ads twice before full ads if u know what i mean.. Should i use about 70ms since thats about where the gun dont double ads?

The 20181204 firmware and manager was updated recently and it shouldíve fixed the issue (although I havenít been able to test yet). Youíll have to factory reset to download it though as itís still under the same identity.

Wait... , so i i have been using the old 204  version from the getgo the whole time??!  :-[ 

And now theres a renewed version of 204, if i understood correctly??  If thats the case no wonder why my aiming has been wonky lately :O . How do we factory reset, and go about this issue?
Download the latest firmware and just press the factory reset button and it will both update you and wipe your xim. Dont use the update firmware button.

The latest firmware is 20190119??? Or download 204 again then do the factory reset?? Im a bit confused here

Offline istainville

  • Member
  • *
  • Posts: 72
    • View Profile
Re: BO4 My Advanced Setup (20181216)
« Reply #846 on: 05:41 PM - 01/26/19 »
Hello fellow ximers, my Xbox gamer tag is LVLoLLy....
I have 171 wins in blackout with a 5.5 kd and 20% win rate. 71 solo wins btw.
I use the vanilla st with sync off and a little smoothing but nothing else. No curves no boost no steady aim. These setting I rarely ever have problems with. I have basically tried every set up posted on the forums and find this one works the best.
70 hip and 35 ads, 5 smoothing. Give it a try and add me on Xbox if youíd like to pay

Updated settings:

>>> XIM APEX [BLACKOUT sync off] START COPY >>>
X5C:AAAAGgA1AC4AMAAwAC4AMgAwADEAOAAxADIAMAA0AAAAIgBCAEwAQQBDAEsATwBVAFQAIABzAHkAbgBjACAAbwBmAGYAAAUBAAAAAAAAAAAGAEgAaQBwAQAAAAAAAAEAAAAAAAAAAAAAA4QAZAABYEAAAAAAAAAUAAAAAADIAZACWAMgA+gEsAV4BkAHCAfQCJgJYAooCvALuAyADUgOEA7YD6AQaBEwEfgSwBOIFFAVGBXgFqgXcBg4GQAZyBqQG1gcIBzoHbAeeB9AIAgg0CGYImAjKCPwJLglgCZIJxBjBGAQYIBiQAAAAAAAAAAAAAAAAAAAAQIEBQAAHUwdTBQUQAFAAmIIgEBjIIEBoBBgIGMIYxCAAYACgAiABGIBgRCBBAAAAAAAAAAAQAIAAAAAAACBIAAAAACgBKAIYiBhgAAAAAAAAAAAAAAAHABBAGkAbQAgAEQAbwB3AG4AIABTAGkAZwBoAHQBAUACAAGQAAAAAAAAAAAAAAABwgBkAAEAAAAAAAABAB4AAAAAAMgBkAJYAyAD6ASwBXgGQAcIB9AImAlgCigK8Au4DIANSA4QDtgPoBBoETAR+BLAE4gUUBUYFeAWqBdwGDgZABnIGpAbWBwgHOgdsB54H0AgCCDQIZgiYCMoI/AkuCWAJkgnEGMEYBBggGJAAAAAAAAAAAAAAAAAAAABAgQFAAAdTB1MFBRAAaAQgQGAQGsEQBBAAkAIawhrQKAEoAhrIGsQgSCBEIEEAAAAAAAAAAAAAAAAAAAAAAAAAABrQIABgAKACIAEAAAAAAAAAAAAAAASAFcAaQBuAGcAIABTAHUAaQB0AAFiCAEAAAAAAAAAAAAAAAAANrAAZAAAYEAAAAAAAAAAAAAAAADIAZACWAMgA+gEsAV4BkAHCAfQCJgJYAooCvALuAyADUgOEA7YD6AQaBEwEfgSwBOIFFAVGBXgFqgXcBg4GQAZyBqQG1gcIBzoHbAeeB9AIAgg0CGYImAjKCPwJLglgCZIJxBjBGAQYIBiQAAAAAAAAAAAAAAAAAAAAQIEBQAAHUwdTBQUQAGgEKAEgEBrBIEBQAJACGsIoAhAEIACgAiABIEggRCBBAAAAAAAAAAAoBAAAAAAAAAAAAAAa0AAAAAAAAAAAAAAAAAAAAAAAAAAEgBJAG4AdgBlAG4AdABvAHIAeQAAgSABAAAAAABACAAAAAAAABV8ADIAAQAAAAAAAQAAAAAAAAAAyAGQAlgDIAPoBLAFeAZABwgH0AiYCWAKKArwC7gMgA1IDhAO2A+gEGgRMBH4EsATiBRQFRgV4BaoF3AYOBkAGcgakBtYHCAc6B2wHngfQCAIINAhmCJgIygj8CS4JYAmSCcQYwRgEGCAYkAAAAAAAAAAAAAAAAAAAAECBAUAAB1MHUwUFEABoBCgBIBAawSBAUACQAhrCKAIQBCAAoAIgASBIIEQgQQAAAAAAAAAAKAQAAAAAAAAAAAAAGtAAAAAAAAAAAAAAAAAAAAAAAAAABQAUQB1AGkAYwBrACAATQBlAG4AdQAAQBABAAAAAACAQEAIoBAAAANSAGQAAQAAAAAAAAAAAAAAAAAAyAGQAlgDIAPoBLAFeAZABwgH0AiYCWAKKArwC7gMgA1IDhAO2A+gEGgRMBH4EsATiBRQFRgV4BaoF3AYOBkAGcgakBtYHCAc6B2wHngfQCAIINAhmCJgIygj8CS4JYAmSCcQYwRgEGCAYkAAAAAAAAAAAAAAAAAAAAECBAUAAB1MHUwUFAAAoBCgBIBAawSBAQAAQAhrCGtAQBCgCEACQAGBIIEQgQQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAABQAQQB1AHgAaQBsAGkAYQByAHkAIAABAAAAAAAAAAAAAAAAAAAAbAKjAGQAAQAAAAAAAAEAAAGQAAAAyAGQAlgDIAPoBLAFeAZABwgH0AiYCWAKKArwC7gMgA1IDhAO2A+gEGgRMBH4EsATiBRQFRgV4BaoF3AYOBkAGcgakBtYHCAc6B2wHngfQCAIINAhmCJgIygj8CS4JYAmSCcQYwRgEGCAYkAAAAAAAAAAAAAAAAAAAAECBAUAAB1MHUwUFAAAoBCgBIBAawRAEAAAQAhrCKAIgQGgCEACQAGBIIEQgQQAAAAAAAAAAKAQAAAAAAAAAAAAAGtAAAAAAAAAAAAAAAAAAAAAAA==:X5C
<<< XIM APEX END COPY <<<

These are my best for now. Upped my wins to 180 and kd to 5.64 with these settings

I get an error when pasting this. What firmware/app version are you on? I'm on the latest beta.
Everything is the latest. Iíll post again




>>> XIM APEX [BLACKOUT sync default ] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

Any recent updates or modifications within the current/most recent beta? Thanks!

Offline InZane

  • Member
  • *
  • Posts: 421
    • View Profile
Re: BO4: Advanced Setup (20181216)
« Reply #847 on: 01:32 PM - 01/27/19 »
Is it possible to make an "sniper/scoped" aux that activates when holding breath button for a sec or something? So i can get rid of the boost while ads. Same button is also sprint so is it possible to make it only activate when holding it for a second or more?
Xbox One X | XIM APEX | Glorious Model O/G502 | QPAD MK-90 | Astro A40

Offline Phoenix10

  • Member
  • *
  • Posts: 148
    • View Profile
Re: BO4: Advanced Setup (20181216)
« Reply #848 on: 02:34 AM - 01/28/19 »
I have asked this before but still have some "problems" regarding ads delay
Im using toggle ads (toggle checkpoint) and 400ms delay is making my gun ads twice before full ads if u know what i mean.. Should i use about 70ms since thats about where the gun dont double ads?

The 20181204 firmware and manager was updated recently and it shouldíve fixed the issue (although I havenít been able to test yet). Youíll have to factory reset to download it though as itís still under the same identity.

Hey RML can you please update the set up
can you please make a new config
with the new firmware features ???

Offline Roronoa

  • Member
  • *
  • Posts: 68
    • View Profile
Re: BO4: Advanced Setup (20181216)
« Reply #849 on: 09:17 AM - 01/28/19 »
when did this config the features already existed. he does not use steady aim, for sab rml plays with the nav, so he does not use it.

Offline Roronoa

  • Member
  • *
  • Posts: 68
    • View Profile
Re: BO4: Advanced Setup (20181216)
« Reply #850 on: 09:18 AM - 01/28/19 »
when did this config the features already existed. he does not use steady aim, for sab rml plays with the nav, so he does not use it.

Offline Phoenix10

  • Member
  • *
  • Posts: 148
    • View Profile
Re: BO4: Advanced Setup (20181216)
« Reply #851 on: 05:29 AM - 01/29/19 »
Yeap but i cant copy it
He needs to update it to the new firmware

Offline puinsai

  • Member
  • *
  • Posts: 76
    • View Profile
  • PSN ID: joshrel
Re: BO4: Advanced Setup (20181216)
« Reply #852 on: 10:08 AM - 01/29/19 »
Yeap but i cant copy it
He needs to update it to the new firmware
That is the rml setup for blackout + personal setting for the new firmware
Code: [Select]
>>> XIM APEX [12k BLACKOUT (sync off)] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<
PS4 PRO | XIM APEX | T2 | FW: the latest | Mon: ASUS 28" MG28UQ | Logitech G13 | Logitech G502 Hero | SteelSeries R600 | SteelSeries Siberia 800 | DumaOS Router

Offline Phoenix10

  • Member
  • *
  • Posts: 148
    • View Profile
Re: BO4: Advanced Setup (20181216)
« Reply #853 on: 03:15 PM - 01/29/19 »
Thanks man

Offline MGT Gaming

  • Member
  • *
  • Posts: 92
    • View Profile
  • Gamertag: Jungle Fri3nd
Re: BO4: Advanced Setup (20181216)
« Reply #854 on: 10:51 PM - 01/31/19 »
Is there a way to make it so when I hold my Wing suit config and hold free look it just keeps spinning in circles?