XIM Community

BO4: Advanced Setup (Update 20190811)  (Read 98145 times)

Offline Poison

  • Member
  • *
  • Posts: 9
    • View Profile
Re: BO4 My Advanced Setup (20181216)
« Reply #705 on: 10:47 AM - 12/27/18 »
So after messing around in custom maches for a bit, I basically had to double my sens. I hadn't played BO4 since they added the ADS multiplier in the options, so i'm not sure if they messed with anything since then, but I found it super weird I had to up my sensitivity so much. It sucks too, my settings were perfect before I stopped playing.

Offline HanSolo82

  • Member
  • *
  • Posts: 61
    • View Profile
Re: BO4 My Advanced Setup (20181216)
« Reply #706 on: 04:05 PM - 12/27/18 »
So after messing around in custom maches for a bit, I basically had to double my sens. I hadn't played BO4 since they added the ADS multiplier in the options, so i'm not sure if they messed with anything since then, but I found it super weird I had to up my sensitivity so much. It sucks too, my settings were perfect before I stopped playing.

Dude same here, came back for Christmas Noobs and took me an hour in custom games to found that sweet spot again. My first few games readjusting I felt that I was the christmas noob.
XBOX ONE X | XIM Apex | Corsair K70 , Sony Nav | Steelseries Rival 600 | QCK Cloth | Asus 28" 4k VP28UQG

Offline SwipeFPS

  • Member
  • *
  • Posts: 56
    • View Profile
  • Gamertag: Classified.
Re: BO4 My Advanced Setup (20181216)
« Reply #707 on: 08:50 PM - 12/27/18 »
Why use 1000hz on g502 if it canít poll consistently at 1000hz? Just wondering

Offline RML

  • MVP
  • *
  • Posts: 6173
  • Live Different
    • View Profile
Re: BO4 My Advanced Setup (20181216)
« Reply #708 on: 11:16 PM - 12/27/18 »
Why use 1000hz on g502 if it canít poll consistently at 1000hz? Just wondering

Ive never had an issue with the 502 at 1000hz.
ADVANCED SETUPS


Offline SwipeFPS

  • Member
  • *
  • Posts: 56
    • View Profile
  • Gamertag: Classified.
Re: BO4 My Advanced Setup (20181216)
« Reply #709 on: 01:12 AM - 12/28/18 »
Why use 1000hz on g502 if it canít poll consistently at 1000hz? Just wondering

Ive never had an issue with the 502 at 1000hz.
how would I know if mine isnít polling right if indecide to try 1000hz

Offline RML

  • MVP
  • *
  • Posts: 6173
  • Live Different
    • View Profile
Re: BO4 My Advanced Setup (20181216)
« Reply #710 on: 08:48 AM - 12/28/18 »
Why use 1000hz on g502 if it canít poll consistently at 1000hz? Just wondering

Ive never had an issue with the 502 at 1000hz.
how would I know if mine isnít polling right if indecide to try 1000hz

You'll have pretty bad stutter if it's not polling right.

ADVANCED SETUPS


Offline Happy Camper Cavalry

  • Member
  • *
  • Posts: 200
  • Only the best
    • View Profile
  • Gamertag: 12 Current Members
Re: BO4 My Advanced Setup (20181216)
« Reply #711 on: 10:49 AM - 12/28/18 »
Why use 1000hz on g502 if it canít poll consistently at 1000hz? Just wondering

Ive never had an issue with the 502 at 1000hz.
how would I know if mine isnít polling right if indecide to try 1000hz

You'll have pretty bad stutter if it's not polling right.
I was having stuttering issues with my g502 also. Then I started messing around with the weights. On a hard pad it was getting caught and I couldn't imagine on a soft pad. I removed the two weights at the tips and only have the 3 chevron weights coming up from the base. This has helped the stuttering quite a bit, especially went I snipe.
Try it
The Happy Camper Cavalry is a group of Xim gamers that strive to be the best on Xbox. EST. 2015. Current members include Top 500 (actually top 20) Overwatch players, Apex Predators, & top ranked R6 Legends. That & just an overall good group of guys, & a lady.
To maintain anonymity we use this joint account because unfortunately a member was SWATed. The Xim is a contencous device & we would caution anyone that publicly shares their gamertag on anything Xim related
💯

Offline RML

  • MVP
  • *
  • Posts: 6173
  • Live Different
    • View Profile
Re: BO4 My Advanced Setup (20181216)
« Reply #712 on: 01:17 PM - 12/28/18 »
I removed the entire bottom plate on my G502, it's just added weight and not needed. I'm not sure why anyone would use weights with a mouse. The whole concept of making it heavier has always boggled my mind.
ADVANCED SETUPS


Offline FopaUK

  • Member
  • *
  • Posts: 93
    • View Profile
  • Gamertag: FopaUK
  • PSN ID: FopaUK
Re: BO4 My Advanced Setup (20181216)
« Reply #713 on: 04:05 PM - 12/28/18 »
Getting an error when pasting this config, running latest beta firmware, i am a fairly competent Xim user..  Any ideas?

I have a G502 @ 12k using 1khz apex.
« Last Edit: 04:09 PM - 12/28/18 by FopaUK »

Offline havoxxx

  • MVP
  • *
  • Posts: 1105
    • View Profile
Re: BO4 My Advanced Setup (20181216)
« Reply #714 on: 04:11 PM - 12/28/18 »
I removed the entire bottom plate on my G502, it's just added weight and not needed. I'm not sure why anyone would use weights with a mouse. The whole concept of making it heavier has always boggled my mind.

I play with 2 x 3.6 gs added to the bottom to help with left and right pivot, helps me "V"  a lot easier.


Always streaming, Click the spinning logo!

Offline RML

  • MVP
  • *
  • Posts: 6173
  • Live Different
    • View Profile
Re: BO4 My Advanced Setup (20181216)
« Reply #715 on: 09:37 PM - 12/28/18 »
Getting an error when pasting this config, running latest beta firmware, i am a fairly competent Xim user..  Any ideas?

I have a G502 @ 12k using 1khz apex.

You have to update firmware and manager aswell. Make sure the old manager is off of your device. To check which firmware and manager youre on, tap the 3 dots at the top righg of your config. Then select About. You can then see which firmware and manager your running. Both should be 20181204.

ADVANCED SETUPS


Offline wnb

  • Member
  • *
  • Posts: 340
  • above average.
    • View Profile
Re: BO4 My Advanced Setup (20181216)
« Reply #716 on: 11:32 PM - 12/28/18 »
ok been a long road to get here.. dont think ive moved for 3 days cept bios n bed. so let me get this right please. im using the AA and then i want to be able to over power it enough to get my aimer to his head yer more or less?? cause i been using the xim trying to nullify all auto aim but it gets very hard to keep up with the pace

ive got your settings in now RML, just changed sens.. but im feeling like maybe im losing control on the auto aim ADS (currently im at 70 i think u were at 50) would i be right in saying the lower sens is alil bit more control?
Progress | Xbox One X | g502HERO | Logitech K200 | Sony Bravia kdl-32w670a |
OW | BFV | BO4 | DESTINY 2

Offline RML

  • MVP
  • *
  • Posts: 6173
  • Live Different
    • View Profile
Re: BO4 My Advanced Setup (20181216)
« Reply #717 on: 12:04 AM - 12/29/18 »
ok been a long road to get here.. dont think ive moved for 3 days cept bios n bed. so let me get this right please. im using the AA and then i want to be able to over power it enough to get my aimer to his head yer more or less?? cause i been using the xim trying to nullify all auto aim but it gets very hard to keep up with the pace

ive got your settings in now RML, just changed sens.. but im feeling like maybe im losing control on the auto aim ADS (currently im at 70 i think u were at 50) would i be right in saying the lower sens is alil bit more control?

Yes.. you'd be very right.  ;)
ADVANCED SETUPS


Offline neat

  • Member
  • *
  • Posts: 174
    • View Profile
Re: BO4 My Advanced Setup (20181216)
« Reply #718 on: 04:56 AM - 12/29/18 »
Any XIM4-users playin BO4 in here?

Offline Roronoa

  • Member
  • *
  • Posts: 68
    • View Profile
Re: BO4 My Advanced Setup (20181216)
« Reply #719 on: 05:45 PM - 12/29/18 »
hello RML, I use your config (12k dpi, sync off, 600 boost), with my g502 it was the fire! Since I had to change the mouse I have a rival 600, it is much lighter, my problem now is that when I aim, if I put a little mouse shots my viewer comes out of the bubble! there is a kind of acceleration, it's embarrassing and I do not understand what the problem is, can you please help me?