XIM Community

BO4: Advanced Setup (Update 20190811)  (Read 99060 times)

Offline RML

  • MVP
  • *
  • Posts: 6176
  • Live Different
    • View Profile
Re: BO4 My Advanced Setup (20181216)
« Reply #675 on: 10:27 AM - 12/24/18 »
This setup feels great with assault and LMG, but it feels sluggish when aimed in when I use SMGs or pistols.  It seems like raising my sensitivity isnít cutting it even when Iím up in the 200s.  Odd.

Add more Boost for SMG's. I've used up to 1000 in the past with the Saug and Spitfire. Also try adjusting your X/Y ratio to 1.25 for SMG's.

If I'm running pure SMG's in multiplayer my settings look like this.

12000 DPI
1000hz
Sync Off
Hip - 58, Smoothing 3
ADS - 50, ADS delay 400ms, Smoothing 3, Boost 600
ADVANCED SETUPS


Offline grman

  • Member
  • *
  • Posts: 18
    • View Profile
Re: BO4 My Advanced Setup (20181216)
« Reply #676 on: 01:57 PM - 12/24/18 »
Thank you for the reply an d the help!  I will def give it a shot.  I got used to the settings but still feel a little all over with the smgs, your insights will def help.  Maybe lowering the x/y is what Iím looking for as left/right movements are what feel sluggish but I guess the boost could compensate for that.

Itís funny, I have the same dpi/hz setup with the same mouse and my sensitivity is way higher, 75/175.
« Last Edit: 02:03 PM - 12/24/18 by grman »

Offline RML

  • MVP
  • *
  • Posts: 6176
  • Live Different
    • View Profile
Re: BO4 My Advanced Setup (20181216)
« Reply #677 on: 02:05 PM - 12/24/18 »
Thank you for the reply an d the help!  I will def give it a shot.  I got used to the settings but still feel a little all over with the smgs, your insights will def help.  Maybe lowering the x/y is what Iím looking for as left/right movements are what feel sluggish but I guess the boost could compensate for that.

Itís funny, I have the same dpi/hz setup with the same mouse and my sensitivity is way higher, 75/175.

Are you using a cloth mouse pad?
ADVANCED SETUPS


Offline InZaneHD

  • Member
  • *
  • Posts: 187
    • View Profile
Re: BO4 My Advanced Setup (20181216)
« Reply #678 on: 02:49 PM - 12/24/18 »
Just wondering. Why 1.25yx on smg? Or any other weapons for that sake. Wouldnt it destroy the muscle memory?
Xbox One X   XIM APEX   Glorious O

Offline ceebs

  • MVP
  • *
  • Posts: 1540
    • View Profile
  • PSN ID: Captain_Minxley
Re: BO4 My Advanced Setup (20181216)
« Reply #679 on: 04:54 PM - 12/24/18 »
Your arm swipes very quickly on the horizontal whilst your wrist moves much more slowly on the vertical. Increased Y/X compensates.

Where's HL3?

XIM Apex, PS4 Pro, Crucial MX500 1TB, Allreli T9+, Swiftpoint Z, Gigabyte Aorus, Audio Technica AD700, SB X7, LG 27UD58.

MSI Z97i Gaming AC, Intel Core i5 [email protected], Corsair H100i, EVGA GTX780, 16gb G-Skill [email protected], XFX ProSeries 750w, 3xAerocool Dead Silence, Cooltek W1, 3xSamsung Evo 500 SSD, WD 1TB HDD, Silverstone SST slot-load DVD, KustomPC braided cables. And if you've read this far, you too are a genuine geek, my friend![/s]

Offline RML

  • MVP
  • *
  • Posts: 6176
  • Live Different
    • View Profile
Re: BO4 My Advanced Setup (20181216)
« Reply #680 on: 05:00 PM - 12/24/18 »
Your arm swipes very quickly on the horizontal whilst your wrist moves much more slowly on the vertical. Increased Y/X compensates.

This and SMGs have quite a bit more recoil then other weapons.
ADVANCED SETUPS


Offline Bushido-_-24

  • Member
  • *
  • Posts: 7
    • View Profile
  • PSN ID: Bushido-_-24
Re: BO4 My Advanced Setup (20181216)
« Reply #681 on: 05:56 PM - 12/24/18 »
Per requests, here's my current setup for BO4.

I personally like utilizing Aim Assist (AA) as I believe it gives me an advantage. Why? Because when utilizing AA I can out maneuver and out aim "most" of my opponents that can't move and turn as fast as I can and maintain a high degree of accuracy. I can do this because I can play at higher sensitivity's then a controller player and still be accurate with my shots thanks to the slow down effects of AA. With a little practice XIM can easily put you into the "Elite" class of controller players. The biggest problem with AA is it can be a little over powering for a device as precise as a mouse. For more on that, please see the link in my signature titled "Anti Aim Assist curve set for any FPS game".

PLEASE NOTE: I'm currently getting away from any AA curves with APEX. APEX polling at 1000hz combined with SYNC OFF, 12000 DPI and some added boost cuts through AA nicely.

If you're newer to XIM and you don't know me and you're wondering if this setup may apply to you. Here's a little background on me and my setup.

"I use 12000 dpi because it helps over come AA a little. I use SYNC OFF, because it helps over come AA a little, I use 1000hz. because it helps over come AA a little. Then I use Boost to do the rest. The objective would be to use as little Boost as possible because its the only one of these that will have a negative impact on Linear movement. I've taken all of these things into account, and came up with the settings I've shared. The goal being to make Aim Assist feel more manageable without degrading linear and micro movements to noticeably.

Morale of the story... The more you lower DPI, Polling, SYNC settings and Sensitivity, the more you have to compensate with curves and boost if Aim Assist is too strong for you. I understand wanting to use lower DPI, I honestly Used to be "That Guy!" Od1n and myself were probably the biggest "known members" here that have spoken this way. I swore on 4000 dpi! That was my thing with my Destiny Setup. 4000 DPI, that's because I grew up with it. 12000 dpi felt jittery to me.

Then APEX came along. As an Alpha tester I was committed to test and trial running at 1000hz. At first this felt pretty Jittery to me and I had some real concerns about the quality of performance. But after about a week of playing at 1000hz. and after I realized how much better Aim Assist felt to me while playing at 1000hz. I was completely sold that this is the future of XIM! It takes performance up a few notches, it's more responsive, it cuts through AA better!

Then HE4DHUNTER convinced me to do something I swore I NEVER would do, convert to 12000 DPI. Again, at first this felt jittery to me as much or more so then 1000hz. But I learned to dial in my sensitivity with these new settings and my G502. I learned to steady my hand a little. Now, I won't stray from 12000 DPI either.

(If you don't know who HE4DHUNTER is, watch any of the Admin videos advertising a XIM product since EDGE, if it's COD, then it's HH behind the mouse. The guy is the best XIM COD player on the planet, period!)

My point is. I do these things for a reason. It made sense to me to alter my style and switch to 12000 dpi because I liked how it made AA feel for me when compared to lower DPI settings.

Aim Assist has always been my one and only Nemesis ever since I bought my first XIM and it seems to be just getting stronger with most games. So what you see in my setup is quite literally an evolution of my gaming style over the last 5 years (maybe more)! But it was a necessity for me personally. In order to make AA work for me, to my expectations and still keep linear movement as crisp and clean as possible. This setup is what I had to do.

That being said, everyone is different. This is the story behind my setup. If you asked "what could I do to match your settings?" I don't know how to fully explain that to you without sharing my journey. So sorry for the long winded, ba,blah,ba blah. But that's my answer.

Cheers!"   - RML



THEORY BEHIND THIS SETUP:
- High DPI helps cut through AA (Aim Assist).
- 1000hz helps cut through AA.
- SYNC OFF helps cut through AA.
- Higher Sensitivity helps cut through AA.
- Boost helps cut through AA.
- Smoothing increases AA.



HOW TO APPLY THIS CONCEPT TO YOUR GAME:
- Use your mouses Max DPI setting.
- Activate Advanced settings in XIM Manager.
- Use 1000hz in XIM Manager and 1000 polling on your mouse. (if your mouse doesn't poll at 1000hz consistently and you're feeling Stutter, then run XIM manager at 500hz. This will make AA slightly stronger but fix the stutter. If you're unsure if it's your mouse's polling rate, then add Smoothing and see if it fixes the issue. You should add Smoothing in increments of 1 until stutter is gone. You want to keep Smoothing as low as possible as it will also make AA stronger).
- Change your Sync setting from DEFAULT to SYNC OFF, in manager.
- Adjust your Hip sensitivity in game until you feel comfortable. Adjust your ADS sensitivity the same, but maybe push it a little toward the fast side. Remember higher sens = less AA and raising your ADS sensitivity is the Purest way of eliminating AA. So push it but make sure it's controllable, I suggest you test it on bots in a private game to get the feel for how AA is effecting your aim.
- While testing your aim in a private match, Adjust boost in increments of 100 until AA feels manageable to you. You can then fine tune in smaller increments if you'd like, I'd suggest 25 minimum.

If needed, I suggest the following for applying Smoothing to your setup.
- MUTIPLAYER: 0-4
- BLACKOUT: 4-8

If needed, I suggest the following for applying Boost to your setup.
- BLACKOUT: 0-400 (Going above 400 in Blackout may make long range sniping difficult).
- MULTIPLAYER: 0-1000 (All depends on how much AA you like, if you go above 1000 though aiming gets to responsive IMO).


Got it? Good! On to the setup...

Here's my Full Setup
Beta Firmware/Manager, Link - https://community.xim.tech/index.php?topic=73173.0
In game sensitivity should be maxed at Insane 14
Ads 1x
High Zoom .75x

Aim Assist in game should be [ON]
12000 DPI - http://www.csgosetup.com/dpi-calculator/
G502 Polling is set to 1000
BO4 ST
XIM APEX Polling - 1000
Sync Off


FULL CONFIG (Sync Off) - I'm a NAV user, so you'll have to assign buttons to your liking. This "Full Config Code" is for APEX ONLY!
Code: [Select]
   >>> XIM APEX [BLACKOUT ] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<< 


If the settings above don't work for you then you can try an Anti Aim Assist curve. If you're going to use any of these curves I suggest you first remove any Boost from your settings. Here's a full configuration code. This is an Alpha Stencil ST and not meant for use with ANY particular game. This Configs only purpose is to act as a storage area for AAA curves. Every sub within this config has a AAA curve in it. Every AAA curve I currently recommend is within this config. Just copy/paste the curve from this config into your own.

Anti Aim Assist Curves Storage Config.
Code: [Select]
  >>> XIM APEX [Anti Aim Assist Curves] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

Here's my G502 button mapping (cause several have asked).



CHEERS!

Hey bro why is giving me an error when I try to paste the curve

Offline grman

  • Member
  • *
  • Posts: 18
    • View Profile
Re: BO4 My Advanced Setup (20181216)
« Reply #682 on: 06:53 PM - 12/24/18 »
Make sure you are using the latest beta firmware and manager, that is usually the culprit.  Plus, the curves config is an entire config with different curves stored in it so you have to copy the curve out of the config after you created a new config and pasted this config in.

I use the Corsair aluminum-core hard double sided mouse pad.  Really like it by the way.
« Last Edit: 07:30 PM - 12/24/18 by grman »

Offline mharkush

  • Member
  • *
  • Posts: 14
    • View Profile
  • PSN ID: Mharski420
Re: BO4 My Advanced Setup (20181216)
« Reply #683 on: 03:19 AM - 12/25/18 »
Per requests, here's my current setup for BO4.

I personally like utilizing Aim Assist (AA) as I believe it gives me an advantage. Why? Because when utilizing AA I can out maneuver and out aim "most" of my opponents that can't move and turn as fast as I can and maintain a high degree of accuracy. I can do this because I can play at higher sensitivity's then a controller player and still be accurate with my shots thanks to the slow down effects of AA. With a little practice XIM can easily put you into the "Elite" class of controller players. The biggest problem with AA is it can be a little over powering for a device as precise as a mouse. For more on that, please see the link in my signature titled "Anti Aim Assist curve set for any FPS game".

PLEASE NOTE: I'm currently getting away from any AA curves with APEX. APEX polling at 1000hz combined with SYNC OFF, 12000 DPI and some added boost cuts through AA nicely.

If you're newer to XIM and you don't know me and you're wondering if this setup may apply to you. Here's a little background on me and my setup.

"I use 12000 dpi because it helps over come AA a little. I use SYNC OFF, because it helps over come AA a little, I use 1000hz. because it helps over come AA a little. Then I use Boost to do the rest. The objective would be to use as little Boost as possible because its the only one of these that will have a negative impact on Linear movement. I've taken all of these things into account, and came up with the settings I've shared. The goal being to make Aim Assist feel more manageable without degrading linear and micro movements to noticeably.

Morale of the story... The more you lower DPI, Polling, SYNC settings and Sensitivity, the more you have to compensate with curves and boost if Aim Assist is too strong for you. I understand wanting to use lower DPI, I honestly Used to be "That Guy!" Od1n and myself were probably the biggest "known members" here that have spoken this way. I swore on 4000 dpi! That was my thing with my Destiny Setup. 4000 DPI, that's because I grew up with it. 12000 dpi felt jittery to me.

Then APEX came along. As an Alpha tester I was committed to test and trial running at 1000hz. At first this felt pretty Jittery to me and I had some real concerns about the quality of performance. But after about a week of playing at 1000hz. and after I realized how much better Aim Assist felt to me while playing at 1000hz. I was completely sold that this is the future of XIM! It takes performance up a few notches, it's more responsive, it cuts through AA better!

Then HE4DHUNTER convinced me to do something I swore I NEVER would do, convert to 12000 DPI. Again, at first this felt jittery to me as much or more so then 1000hz. But I learned to dial in my sensitivity with these new settings and my G502. I learned to steady my hand a little. Now, I won't stray from 12000 DPI either.

(If you don't know who HE4DHUNTER is, watch any of the Admin videos advertising a XIM product since EDGE, if it's COD, then it's HH behind the mouse. The guy is the best XIM COD player on the planet, period!)

My point is. I do these things for a reason. It made sense to me to alter my style and switch to 12000 dpi because I liked how it made AA feel for me when compared to lower DPI settings.

Aim Assist has always been my one and only Nemesis ever since I bought my first XIM and it seems to be just getting stronger with most games. So what you see in my setup is quite literally an evolution of my gaming style over the last 5 years (maybe more)! But it was a necessity for me personally. In order to make AA work for me, to my expectations and still keep linear movement as crisp and clean as possible. This setup is what I had to do.

That being said, everyone is different. This is the story behind my setup. If you asked "what could I do to match your settings?" I don't know how to fully explain that to you without sharing my journey. So sorry for the long winded, ba,blah,ba blah. But that's my answer.

Cheers!"   - RML



THEORY BEHIND THIS SETUP:
- High DPI helps cut through AA (Aim Assist).
- 1000hz helps cut through AA.
- SYNC OFF helps cut through AA.
- Higher Sensitivity helps cut through AA.
- Boost helps cut through AA.
- Smoothing increases AA.



HOW TO APPLY THIS CONCEPT TO YOUR GAME:
- Use your mouses Max DPI setting.
- Activate Advanced settings in XIM Manager.
- Use 1000hz in XIM Manager and 1000 polling on your mouse. (if your mouse doesn't poll at 1000hz consistently and you're feeling Stutter, then run XIM manager at 500hz. This will make AA slightly stronger but fix the stutter. If you're unsure if it's your mouse's polling rate, then add Smoothing and see if it fixes the issue. You should add Smoothing in increments of 1 until stutter is gone. You want to keep Smoothing as low as possible as it will also make AA stronger).
- Change your Sync setting from DEFAULT to SYNC OFF, in manager.
- Adjust your Hip sensitivity in game until you feel comfortable. Adjust your ADS sensitivity the same, but maybe push it a little toward the fast side. Remember higher sens = less AA and raising your ADS sensitivity is the Purest way of eliminating AA. So push it but make sure it's controllable, I suggest you test it on bots in a private game to get the feel for how AA is effecting your aim.
- While testing your aim in a private match, Adjust boost in increments of 100 until AA feels manageable to you. You can then fine tune in smaller increments if you'd like, I'd suggest 25 minimum.

If needed, I suggest the following for applying Smoothing to your setup.
- MUTIPLAYER: 0-4
- BLACKOUT: 4-8

If needed, I suggest the following for applying Boost to your setup.
- BLACKOUT: 0-400 (Going above 400 in Blackout may make long range sniping difficult).
- MULTIPLAYER: 0-1000 (All depends on how much AA you like, if you go above 1000 though aiming gets to responsive IMO).


Got it? Good! On to the setup...

Here's my Full Setup
Beta Firmware/Manager, Link - https://community.xim.tech/index.php?topic=73173.0
In game sensitivity should be maxed at Insane 14
Ads 1x
High Zoom .75x

Aim Assist in game should be [ON]
12000 DPI - http://www.csgosetup.com/dpi-calculator/
G502 Polling is set to 1000
BO4 ST
XIM APEX Polling - 1000
Sync Off


FULL CONFIG (Sync Off) - I'm a NAV user, so you'll have to assign buttons to your liking. This "Full Config Code" is for APEX ONLY!
Code: [Select]
   >>> XIM APEX [BLACKOUT ] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<< 


If the settings above don't work for you then you can try an Anti Aim Assist curve. If you're going to use any of these curves I suggest you first remove any Boost from your settings. Here's a full configuration code. This is an Alpha Stencil ST and not meant for use with ANY particular game. This Configs only purpose is to act as a storage area for AAA curves. Every sub within this config has a AAA curve in it. Every AAA curve I currently recommend is within this config. Just copy/paste the curve from this config into your own.

Anti Aim Assist Curves Storage Config.
Code: [Select]
  >>> XIM APEX [Anti Aim Assist Curves] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

Here's my G502 button mapping (cause several have asked).



CHEERS!




RML when i try copy and paste your entire config to my xim manager it say error? can you help me pls..

Offline mharkush

  • Member
  • *
  • Posts: 14
    • View Profile
  • PSN ID: Mharski420
Re: BO4 My Advanced Setup (20181216)
« Reply #684 on: 06:01 AM - 12/25/18 »
Per requests, here's my current setup for BO4.

I personally like utilizing Aim Assist (AA) as I believe it gives me an advantage. Why? Because when utilizing AA I can out maneuver and out aim "most" of my opponents that can't move and turn as fast as I can and maintain a high degree of accuracy. I can do this because I can play at higher sensitivity's then a controller player and still be accurate with my shots thanks to the slow down effects of AA. With a little practice XIM can easily put you into the "Elite" class of controller players. The biggest problem with AA is it can be a little over powering for a device as precise as a mouse. For more on that, please see the link in my signature titled "Anti Aim Assist curve set for any FPS game".

PLEASE NOTE: I'm currently getting away from any AA curves with APEX. APEX polling at 1000hz combined with SYNC OFF, 12000 DPI and some added boost cuts through AA nicely.

If you're newer to XIM and you don't know me and you're wondering if this setup may apply to you. Here's a little background on me and my setup.

"I use 12000 dpi because it helps over come AA a little. I use SYNC OFF, because it helps over come AA a little, I use 1000hz. because it helps over come AA a little. Then I use Boost to do the rest. The objective would be to use as little Boost as possible because its the only one of these that will have a negative impact on Linear movement. I've taken all of these things into account, and came up with the settings I've shared. The goal being to make Aim Assist feel more manageable without degrading linear and micro movements to noticeably.

Morale of the story... The more you lower DPI, Polling, SYNC settings and Sensitivity, the more you have to compensate with curves and boost if Aim Assist is too strong for you. I understand wanting to use lower DPI, I honestly Used to be "That Guy!" Od1n and myself were probably the biggest "known members" here that have spoken this way. I swore on 4000 dpi! That was my thing with my Destiny Setup. 4000 DPI, that's because I grew up with it. 12000 dpi felt jittery to me.

Then APEX came along. As an Alpha tester I was committed to test and trial running at 1000hz. At first this felt pretty Jittery to me and I had some real concerns about the quality of performance. But after about a week of playing at 1000hz. and after I realized how much better Aim Assist felt to me while playing at 1000hz. I was completely sold that this is the future of XIM! It takes performance up a few notches, it's more responsive, it cuts through AA better!

Then HE4DHUNTER convinced me to do something I swore I NEVER would do, convert to 12000 DPI. Again, at first this felt jittery to me as much or more so then 1000hz. But I learned to dial in my sensitivity with these new settings and my G502. I learned to steady my hand a little. Now, I won't stray from 12000 DPI either.

(If you don't know who HE4DHUNTER is, watch any of the Admin videos advertising a XIM product since EDGE, if it's COD, then it's HH behind the mouse. The guy is the best XIM COD player on the planet, period!)

My point is. I do these things for a reason. It made sense to me to alter my style and switch to 12000 dpi because I liked how it made AA feel for me when compared to lower DPI settings.

Aim Assist has always been my one and only Nemesis ever since I bought my first XIM and it seems to be just getting stronger with most games. So what you see in my setup is quite literally an evolution of my gaming style over the last 5 years (maybe more)! But it was a necessity for me personally. In order to make AA work for me, to my expectations and still keep linear movement as crisp and clean as possible. This setup is what I had to do.

That being said, everyone is different. This is the story behind my setup. If you asked "what could I do to match your settings?" I don't know how to fully explain that to you without sharing my journey. So sorry for the long winded, ba,blah,ba blah. But that's my answer.

Cheers!"   - RML



THEORY BEHIND THIS SETUP:
- High DPI helps cut through AA (Aim Assist).
- 1000hz helps cut through AA.
- SYNC OFF helps cut through AA.
- Higher Sensitivity helps cut through AA.
- Boost helps cut through AA.
- Smoothing increases AA.



HOW TO APPLY THIS CONCEPT TO YOUR GAME:
- Use your mouses Max DPI setting.
- Activate Advanced settings in XIM Manager.
- Use 1000hz in XIM Manager and 1000 polling on your mouse. (if your mouse doesn't poll at 1000hz consistently and you're feeling Stutter, then run XIM manager at 500hz. This will make AA slightly stronger but fix the stutter. If you're unsure if it's your mouse's polling rate, then add Smoothing and see if it fixes the issue. You should add Smoothing in increments of 1 until stutter is gone. You want to keep Smoothing as low as possible as it will also make AA stronger).
- Change your Sync setting from DEFAULT to SYNC OFF, in manager.
- Adjust your Hip sensitivity in game until you feel comfortable. Adjust your ADS sensitivity the same, but maybe push it a little toward the fast side. Remember higher sens = less AA and raising your ADS sensitivity is the Purest way of eliminating AA. So push it but make sure it's controllable, I suggest you test it on bots in a private game to get the feel for how AA is effecting your aim.
- While testing your aim in a private match, Adjust boost in increments of 100 until AA feels manageable to you. You can then fine tune in smaller increments if you'd like, I'd suggest 25 minimum.

If needed, I suggest the following for applying Smoothing to your setup.
- MUTIPLAYER: 0-4
- BLACKOUT: 4-8

If needed, I suggest the following for applying Boost to your setup.
- BLACKOUT: 0-400 (Going above 400 in Blackout may make long range sniping difficult).
- MULTIPLAYER: 0-1000 (All depends on how much AA you like, if you go above 1000 though aiming gets to responsive IMO).


Got it? Good! On to the setup...

Here's my Full Setup
Beta Firmware/Manager, Link - https://community.xim.tech/index.php?topic=73173.0
In game sensitivity should be maxed at Insane 14
Ads 1x
High Zoom .75x

Aim Assist in game should be [ON]
12000 DPI - http://www.csgosetup.com/dpi-calculator/
G502 Polling is set to 1000
BO4 ST
XIM APEX Polling - 1000
Sync Off


FULL CONFIG (Sync Off) - I'm a NAV user, so you'll have to assign buttons to your liking. This "Full Config Code" is for APEX ONLY!
Code: [Select]
   >>> XIM APEX [BLACKOUT ] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<< 


If the settings above don't work for you then you can try an Anti Aim Assist curve. If you're going to use any of these curves I suggest you first remove any Boost from your settings. Here's a full configuration code. This is an Alpha Stencil ST and not meant for use with ANY particular game. This Configs only purpose is to act as a storage area for AAA curves. Every sub within this config has a AAA curve in it. Every AAA curve I currently recommend is within this config. Just copy/paste the curve from this config into your own.

Anti Aim Assist Curves Storage Config.
Code: [Select]
  >>> XIM APEX [Anti Aim Assist Curves] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

Here's my G502 button mapping (cause several have asked).



CHEERS!


RML do you have a config only for hip and ads not the full config coz everytime i try to paste your full set up it say error>? my xim apex has the latest update and xim manager too..

Offline dawidmal22

  • Member
  • *
  • Posts: 27
    • View Profile
Re: BO4 My Advanced Setup (20181216)
« Reply #685 on: 07:07 AM - 12/25/18 »
Hi

I am using your setup.

Is there a way to get more AA using high DPI?

I have increased smoothing under ADS to 8 also lowered boost to 100.
What else i should do?

Can you advise me exactly what is should do to get max AA setings?

Right now when enemy strafing i have problem Killing it.

Offline Trshy

  • Member
  • *
  • Posts: 53
    • View Profile
Re: BO4 My Advanced Setup (20181216)
« Reply #686 on: 07:38 AM - 12/25/18 »
Hi

I am using your setup.

Is there a way to get more AA using high DPI?

I have increased smoothing under ADS to 8 also lowered boost to 100.
What else i should do?

Can you advise me exactly what is should do to get max AA setings?

Right now when enemy strafing i have problem Killing it.

that's because you have too much aim assist, aim assist and strafing don't work well with each other, with high aim assist your long shot will be perfect but your close combat shots will suffer the most due to strafing especially with smgs. your best bet is to lower aim assist and have each of both worlds, little aim assist for long shots, and little aim assist to help break through aim assist bubble easily. try lowering your smoothing to 3, and increase your boost to 400 maybe? and try it and adjust the boost for your liking. you need to find the perfect balance for you to handle close and long ranges.

Offline dawidmal22

  • Member
  • *
  • Posts: 27
    • View Profile
Re: BO4 My Advanced Setup (20181216)
« Reply #687 on: 10:26 AM - 12/25/18 »

Thanks,

My hip is 120 with 12000 dpi and ads is 70 now.

Well i was thinking if AA is working fine then strafing will not be a problem. AA will help, but from what you are writing things are different.





Hi

I am using your setup.

Is there a way to get more AA using high DPI?

I have increased smoothing under ADS to 8 also lowered boost to 100.
What else i should do?

Can you advise me exactly what is should do to get max AA setings?

Right now when enemy strafing i have problem Killing it.

that's because you have too much aim assist, aim assist and strafing don't work well with each other, with high aim assist your long shot will be perfect but your close combat shots will suffer the most due to strafing especially with smgs. your best bet is to lower aim assist and have each of both worlds, little aim assist for long shots, and little aim assist to help break through aim assist bubble easily. try lowering your smoothing to 3, and increase your boost to 400 maybe? and try it and adjust the boost for your liking. you need to find the perfect balance for you to handle close and long ranges.

Offline ceebs

  • MVP
  • *
  • Posts: 1540
    • View Profile
  • PSN ID: Captain_Minxley
Re: BO4 My Advanced Setup (20181216)
« Reply #688 on: 06:32 PM - 12/25/18 »
Sorry Trshy, I know youíre trying to help the guy, but I have to disagree with just about everything youíve just told him:
aim assist and strafing don't work well with each other
The opposite is true: whilst strafing you get both AA Slowdown and AA Autorate
with high aim assist your long shot will be perfect
You donít get either AA with long shots. The AA range is limited by weapon type, the longest being with ARs at about 20m. Sniper rifles have no AA at all
close combat shots will suffer the most
CQC is well within the AA range
your best bet is to lower aim assist
You canít lower AA. Itís either on or itís not
try lowering your smoothing to 3, and increase your boost to 400 maybe? and try it and adjust the boost for your liking. you need to find the perfect balance for you to handle close and long ranges.
Smoothing has hardly any effect on AA, it simply quantizes the vanilla BC and boost just increases the stickís DZ.

In response to dawidmal22, if youíre using RMLís latest setup (with the beta firmware and manager via Testflight) your config is optimised for utilising AA. Take it from me, you donít want stronger AA as youíll be constantly be fighting the bubble if you do. Donít forget, AA wonít aim for you, or pull you on target. Itís a hindrence as much as it is a help.
What specifically is happening when youíre strafing?
« Last Edit: 06:40 PM - 12/25/18 by ceebs »

Where's HL3?

XIM Apex, PS4 Pro, Crucial MX500 1TB, Allreli T9+, Swiftpoint Z, Gigabyte Aorus, Audio Technica AD700, SB X7, LG 27UD58.

MSI Z97i Gaming AC, Intel Core i5 [email protected], Corsair H100i, EVGA GTX780, 16gb G-Skill [email protected], XFX ProSeries 750w, 3xAerocool Dead Silence, Cooltek W1, 3xSamsung Evo 500 SSD, WD 1TB HDD, Silverstone SST slot-load DVD, KustomPC braided cables. And if you've read this far, you too are a genuine geek, my friend![/s]

Offline jeffpaw96

  • Member
  • *
  • Posts: 27
    • View Profile
Re: BO4 My Advanced Setup (20181216)
« Reply #689 on: 08:41 PM - 12/25/18 »
Sorry Trshy, I know youíre trying to help the guy, but I have to disagree with just about everything youíve just told him:
aim assist and strafing don't work well with each other
The opposite is true: whilst strafing you get both AA Slowdown and AA Autorate
with high aim assist your long shot will be perfect
You donít get either AA with long shots. The AA range is limited by weapon type, the longest being with ARs at about 20m. Sniper rifles have no AA at all
close combat shots will suffer the most
CQC is well within the AA range
your best bet is to lower aim assist
You canít lower AA. Itís either on or itís not
try lowering your smoothing to 3, and increase your boost to 400 maybe? and try it and adjust the boost for your liking. you need to find the perfect balance for you to handle close and long ranges.
Smoothing has hardly any effect on AA, it simply quantizes the vanilla BC and boost just increases the stickís DZ.

In response to dawidmal22, if youíre using RMLís latest setup (with the beta firmware and manager via Testflight) your config is optimised for utilising AA. Take it from me, you donít want stronger AA as youíll be constantly be fighting the bubble if you do. Donít forget, AA wonít aim for you, or pull you on target. Itís a hindrence as much as it is a help.
What specifically is happening when youíre strafing?

I agree with most of what you've said but I'm surprised you don't notice the significant impact smoothing can have on AA. I'm far from an expert with xim but tracking fast moving targets (i.e. smg players with stock) is substantially better when in ADS with lower smoothing values. Even changing by only 1 whole number is very noticeable and leads to less "stuck in the mud" feeling. The same seems to be true when hip firing with heroes like tempest where smoothing make or breaks ability to consistently land shots.