XIM Community

FEEDBACK: [Firmware 20180324] [Manager 20180321] (**BETA**)  (Read 8067 times)

Offline Zaid

  • Member
  • *
  • Posts: 46
    • View Profile
Re: FEEDBACK: [Firmware 20180321] [Manager 20180321] (**BETA**)
« Reply #45 on: 07:04 AM - 03/23/18 »
^ i know that , dividing by 2 is the correct way, Although the sensitivity is not the same that way.

but you said you’re going from common to default. you need to MULTIPLY by 2 not divide. thats why you’re getting very slow sensitivities
« Last Edit: 07:51 AM - 03/23/18 by Zaid »

Offline Dutch_muscle

  • Member
  • *
  • Posts: 110
    • View Profile
  • Gamertag: Ferror error
Re: FEEDBACK: [Firmware 20180321] [Manager 20180321] (**BETA**)
« Reply #46 on: 09:21 AM - 03/23/18 »
No, did you read obs firmware post? When he posted it it was a fault saying we need to multiply it, he corrected it by saying we need to DIVIDE it...
Bf addict

Offline ANDREA

  • Member
  • *
  • Posts: 16
    • View Profile
Re: FEEDBACK: [Firmware 20180321] [Manager 20180321] (**BETA**)
« Reply #47 on: 09:57 AM - 03/23/18 »
So..played a couple of hours on cod ww2 with the new firmware on "common" (60fps game) and Sync Off @1000hz.
Common feels great, so smooth, but it seems to play with the old Xim4 and sometimes you can be stuck on the aim assist bubble. Sync off feels better for me, it's more responsive and you can aim from one target to another without having problems with the aim assist. For this little time I have use this firmware it seems to work great.
Mouse: Logitech G403 Prodigy
KB: Razer Orbweaver Chroma, Logitech G213 Prodigy
Mousepad: SteelSeries QcK XXl
Headset: Astro A50 3rd Gen Xbox One Edition
Console: Xbox One X
Pc: Asus G10AC

Offline Catacomb

  • Member
  • *
  • Posts: 81
    • View Profile
Re: FEEDBACK: [Firmware 20180321] [Manager 20180321] (**BETA**)
« Reply #48 on: 10:07 AM - 03/23/18 »
Well seems that the problems that I had with the new FW where caused by my mouspad, used an strelseries qck+ and now got a Logitech g440 hard pad and the thing works beautifully.......

Offline thediscobiscuits

  • Member
  • *
  • Posts: 349
  • B4L
    • View Profile
  • PSN ID: BISCOJOE-42
Re: FEEDBACK: [Firmware 20180321] [Manager 20180321] (**BETA**)
« Reply #49 on: 10:30 AM - 03/23/18 »
Same. I'm noticing a huge difference in my aim assist/aiming in general on my mm600 hard pad compared to my cloth
Logitech G Pro Hero
Zowie G-SR SE Mousepad
Zowie Camade Bungee
BenQ XL2411Z 144Hz Monitor
Ducky One Tenkeyless Cherry MX Red KB with doubled up o-rings =)
PS4 Pro

Offline Dutch_muscle

  • Member
  • *
  • Posts: 110
    • View Profile
  • Gamertag: Ferror error
Re: FEEDBACK: [Firmware 20180321] [Manager 20180321] (**BETA**)
« Reply #50 on: 10:36 AM - 03/23/18 »
On 4k dpi with a very low sens 4.50 hip and 2.5 ads "common" feels great!
Aim assist is there but not a big hindrance, aim feels great!
Default also feels great! @#$% why made obs this so good XD
Bf addict

Offline kryptek

  • Member
  • *
  • Posts: 17
    • View Profile
Re: FEEDBACK: [Firmware 20180321] [Manager 20180321] (**BETA**)
« Reply #51 on: 11:17 AM - 03/23/18 »
Code: [Select]
[General]
Console: XBOX ONE X
Mouse: Logitech G903
Poll rate: 1000hz
DPI: 12000
Monitor: LG32UD99

[Hip]
Aim: 10.00
Smoothing: 20
Y/X Ratio: 1.00
Synchronize: Common

[ADS]
Aim: 7.00
Smoothing: 20
Y/X Ratio: 1.00
Synchronize: Common


Just my advice so take it for what it's worth, but don't obsess over preserving your existing settings or trying to scale them back for a given sensitivity.  Just find what feels right. Go into an empty lobby, do a few tweaks and you should be good to go. I always do this when there's a significant change and it doesn't negatively impact me at all. You may even find that when starting fresh you'll feel a bit more comfortable with your setup.
« Last Edit: 11:27 AM - 03/23/18 by kryptek »

Offline OBsIV

  • Administrator
  • MVP
  • *
  • Posts: 37843
  • It's obsessive.
    • View Profile
    • OBsIV's Blog
Re: FEEDBACK: [Firmware 20180321] [Manager 20180321] (**BETA**)
« Reply #52 on: 11:20 AM - 03/23/18 »
Just my advice so take it for what it's worth, but don't obsess over preserving your existing settings or trying to scale them back for a given sensitivity.  Just find what feels right.

Excellent advice. :)
Get the most out of your XIM APEX, read the XIM APEX Support FAQ.

Offline Dutch_muscle

  • Member
  • *
  • Posts: 110
    • View Profile
  • Gamertag: Ferror error
Re: FEEDBACK: [Firmware 20180321] [Manager 20180321] (**BETA**)
« Reply #53 on: 12:32 PM - 03/23/18 »
Dont know what obs did with common setting but oh boy its so smooth and accurate
My follow up shots connects like a dream.
I switched constantly between default and common but common has the edge over default In bf1
Bf addict

Offline OBsIV

  • Administrator
  • MVP
  • *
  • Posts: 37843
  • It's obsessive.
    • View Profile
    • OBsIV's Blog
Re: FEEDBACK: [Firmware 20180321] [Manager 20180321] (**BETA**)
« Reply #54 on: 12:39 PM - 03/23/18 »
I debated on whether "Common" should be the default. But I decided to keep the default behavior to match the behavior of all XIMs before XIM APEX.
Get the most out of your XIM APEX, read the XIM APEX Support FAQ.

Offline link575

  • Member
  • *
  • Posts: 89
    • View Profile
  • Gamertag: LoneWolf575
Re: FEEDBACK: [Firmware 20180321] [Manager 20180321] (**BETA**)
« Reply #55 on: 12:47 PM - 03/23/18 »
I debated on whether "Common" should be the default. But I decided to keep the default behavior to match the behavior of all XIMs before XIM APEX.

Obsiv, is there a way to set our own default so to speak. Like every ST we make will start on common, or would that be too confusing.

Offline bimheadshoot

  • Member
  • *
  • Posts: 187
    • View Profile
Re: FEEDBACK: [Firmware 20180321] [Manager 20180321] (**BETA**)
« Reply #56 on: 01:01 PM - 03/23/18 »
Result of my test :  default (125hz) identical xim4 referred auto medium ,   Common (60hz) auto aim strong ,  low (30hz) auto aim very strong , off : auto aim low but very jitter , No jitter on common default and low.

Offline sonicwall4500

  • Member
  • *
  • Posts: 62
    • View Profile
  • PSN ID: Sonicwall_4500
Re: FEEDBACK: [Firmware 20180321] [Manager 20180321] (**BETA**)
« Reply #57 on: 02:02 PM - 03/23/18 »
Result of my test :  default (125hz) identical xim4 referred auto medium ,   Common (60hz) auto aim strong ,  low (30hz) auto aim very strong , off : auto aim low but very jitter , No jitter on common default and low.

which games?
Logitech Gpro mouse, Logitech G13 keypad. Benq RL2455 Monitor. PS3/PS4. Logitech G440 hard mouse pad. XIM APEX, 12k DPI, 1000 polling

Offline bimheadshoot

  • Member
  • *
  • Posts: 187
    • View Profile
Re: FEEDBACK: [Firmware 20180321] [Manager 20180321] (**BETA**)
« Reply #58 on: 02:49 PM - 03/23/18 »
Bf1 , cod w2 , fornite , star wars bfr2

Offline bimheadshoot

  • Member
  • *
  • Posts: 187
    • View Profile
Re: FEEDBACK: [Firmware 20180321] [Manager 20180321] (**BETA**)
« Reply #59 on: 02:58 PM - 03/23/18 »
Question for obsv, from how much smoothing on off is the same feeling as 125hz ?? Plz