OVERWATCH Linear Fix

[kojsdojo]

Hey mate thank you so much to release another config that probably works in some ways.
But i really must say i stay with expo there are many reasons for it.

The precision is in some situation more accurate on Linear ramp.
But for my playstyle (pre aim from hip zoom in and headshot) its not working fine.

And also flick shots are not really working in the same way like on the exponential one.
But keep your work up since i stoped mine (more or less) i wish there is someone like you.

Good job mate

Greets
kojsdojo

[Lineater]

I've got to be doing something wrong.  While the Linear works, I keep double red flashing on my XIM when I move my mouse.  I am using a G502 mouse set to 12,000 DPI, 1000 poll, and Overwatch character sensitivity settings are set to 100%.  My mouse sensitivity within the XIM is set to 80 (because using the exponential ramp settings my XIM mouse sensitivity is set to 40).

Any XIM mouse sensitivity in XIM less than 80 feels like I am moving ultra slow.  Yet I see some of you folks are using 20, 30, etc.  How is this possible?  Am I missing some key setting here?  I've tried 8 - 12 on the curve and I still have to have high sensitivity to feel like I am still moving around normally.

Because at for instance 30 XIM mouse sensitivity for me to move the aim point more then 6 "game feet" I can't simply flick the mouse, I have to move it clear across my mouse pad almost.

Are you sure your mouse is set to 12000 dpi?  Are you saving your Logitech profiles to the on-board memory?

40 XIM sensitivity at 12000 dpi sounds way too fast to be playable.  Most people use like 5-12.

[Mouse N Keybord]

My micro movements are all over the place with linear ramp! Can't use it at all for reason.

[gunit2004]

My micro movements are all over the place with linear ramp! Can't use it at all for reason.

Which console are you running and which curve did you use? And are you using the Console Crossover ST?

[Mouse N Keybord]

My micro movements are all over the place with linear ramp! Can't use it at all for reason.

Which console are you running and which curve did you use? And are you using the Console Crossover ST?

Double checking things...

[Mouse N Keybord]

My micro movements are all over the place with linear ramp! Can't use it at all for reason.

Which console are you running and which curve did you use? And are you using the Console Crossover ST?

Need the proper CC ST. But now my micro moves are jagged and slow. The aim feels smooth and easy to aim though.

[MokSifu]

>>> XIM4 [Overwatch (Linear)] START PASTE >>>
X4C:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAAAJABPAHYAZQByAHcAYQB0AGMAaAAgACgATABpAG4AZQBhAHIAKWcEBAEBAAAAAAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAAABgBIAGkAcAAAAAAAAAAAAAAAAAAADRYAvgAAAAAAAQAAABQeKDI8RlBaZG54goyWoKq0vsjIyGMEYBBggGJAAAAAAAAAAAAAAB1MAEABQAJhAXwCYQJiEGUQYEBiIGNAagRqAqAIagFpAWUIZQIAAAAAAAAAAAAAQAQAAAAAAAAAAKAEQBBACAAAAAAAAAAAAAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAAABgBBAGQAc0ACAAAAAAAAAAAAAAABBg4AyAAAAAAAAQAAAREbJS85Q01XYWt1f4mTnaexu8XGyGMEYBBggGJAAAAAAAAAAAAAAB1MAEABQAJhAXwCYQRiEGUQYEBiIGNAagRqAmmAagFpAWUIZQIAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1/////wAAAAAAAAAAAAAAAAABD6AAZAAAAAAAAAAAAAAKFB4oMjxGUFpkbniCjJagqrS+yAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1/////wAAAAAAAAAAAAAAAAABD6AAZAAAAAAAAAAAAAAKFB4oMjxGUFpkbniCjJagqrS+yAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1/////wAAAAAAAAAAAAAAAAABD6AAZAAAAAAAAAAAAAAKFB4oMjxGUFpkbniCjJagqrS+yAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1/////wAAAAAAAAAAAAAAAAABD6AAZAAAAAAAAAAAAAAKFB4oMjxGUFpkbniCjJagqrS+yAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA:X4C
<<< XIM4 END PASTE <<<

These are my settings on a G502 12k DPI 1000hz polling.

Felt so good on widowmaker in comp. Here's a video of me playing with it for the first time:

http://www.youtube.com/v/HpK-WtyWMLQ&hd=1

Link: http://www.youtube.com/watch?v=HpK-WtyWMLQ

Nice! the Pocket healer saved your a$$ a few times but looks like a good game!

Yeah the mercy is my gf so we're used to playing together in this way

[A Big Ol Bully]

My micro movements are all over the place with linear ramp! Can't use it at all for reason.

Which console are you running and which curve did you use? And are you using the Console Crossover ST?

Need the proper CC ST. But now my micro moves are jagged and slow. The aim feels smooth and easy to aim though.

Did you go through the steps I laid out on the first Post on this Thread? if it's jagged then you need to raise the bottom of your curve until it's smooth. Just keep going up, it'll smooth out. You'll probably have to lower the sense but you'll figure it out. What's important is that the GRADIENT of your curve doesn't change. Try to make sure the two lines (your curve and the default middle outline) are 100% parallel.

[Mouse N Keybord]

My micro movements are all over the place with linear ramp! Can't use it at all for reason.

Which console are you running and which curve did you use? And are you using the Console Crossover ST?

Need the proper CC ST. But now my micro moves are jagged and slow. The aim feels smooth and easy to aim though.

Did you go through the steps I laid out on the first Post on this Thread? if it's jagged then you need to raise the bottom of your curve until it's smooth. Just keep going up, it'll smooth out. You'll probably have to lower the sense but you'll figure it out. What's important is that the GRADIENT of your curve doesn't change. Try to make sure the two lines (your curve and the default middle outline) are 100% parallel.

I got it worked out and decided to up my DPI from 6k to 12k on my g502. Followed everything and it's decent. I wish we had a ST for the linear ramp if it's possible. Not as floaty as the other ramp but feels like it locks on harder then my previous settings on expo ramp.

[domontaco]

Im really liking this so far. So consistent! But what about angle snapping for g502 users?

You guys turn it on or off? I turned it off when i used the expo and 0 aim smoothing because it felt like it dragged a bit im wondering what you guys are doing with it now?

[A Big Ol Bully]

Im really liking this so far. So consistent! But what about angle snapping for g502 users?

You guys turn it on or off? I turned it off when i used the expo and 0 aim smoothing because it felt like it dragged a bit im wondering what you guys are doing with it now?

Angle snapping is for graphic design, not gaming.

[LetThemEatCake]

I'm trying this config for 2 days now and I don't know what to think, and I don't have the word to express my feelings about it but I will try
I use g502 12k, ramp to 12, x/y 1.5, 20 sens

I like the "linear feel", making flicks way more consistent, aiming more controlable

but I noticed a lot of problem (for me at least)
- when hittining max turn (red flash), aim slow or get stuck, very weird feeling (not this issue with expo at all, aim stay at max and that's it)
- a lot of time (mostly when aiming diagonaly) aim go crazy, I don't know how to describe it but it's disturbing, at first I though my mouse or mousepad was the problem but I went back to expo for a while and didn't get any wierd behavior, came back to linear and it happenned again
- can't really ajust sens, I play at 20 and it feels slow, but I know if I got higher xim will flash red and aim will be wierd

I really want to use it because I like it a lot with Widow, macree, ana for flicking but those wierd behavior are gonna make me switch back I think

(forgive my bad english)

[gunit2004]

I'm trying this config for 2 days now and I don't know what to think, and I don't have the word to express my feelings about it but I will try
I use g502 12k, ramp to 12, x/y 1.5, 20 sens

I like the "linear feel", making flicks way more consistent, aiming more controlable

but I noticed a lot of problem (for me at least)
- when hittining max turn (red flash), aim slow or get stuck, very weird feeling (not this issue with expo at all, aim stay at max and that's it)
- a lot of time (mostly when aiming diagonaly) aim go crazy, I don't know how to describe it but it's disturbing, at first I though my mouse or mousepad was the problem but I went back to expo for a while and didn't get any wierd behavior, came back to linear and it happenned again
- can't really ajust sens, I play at 20 and it feels slow, but I know if I got higher xim will flash red and aim will be wierd

I really want to use it because I like it a lot with Widow, macree, ana for flicking but those wierd behavior are gonna make me switch back I think

(forgive my bad english)

I play 90 sens @ 3200 DPI and don't get this behavior. What console are you on and what curve are you using? (paste it here)

[Supernatural X]

Alrighty guys I've been converted wololo linear ramp is better I played with it over the weekend and my McCree accuracy has been 60% or higher every game and I've had about 57% scoped accuracy with Widowmaker. Would recommend the @#$% out of this I've climbed approximately 400sr over the weekend while using this.

[LetThemEatCake]

this is the curve I use

>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1GCErND5IUVtkbniBi5WeqLG7xcjI:X4MB
<<< XIM4 END PASTE <<<


with 12 as the number and I play xbox