OVERWATCH Linear Fix

[OBsIV]

Can anyone explain how this feels better then the official expo settings? Cause those have been absolutely great for me, got me to GM this season finally.

XIM4s mouse translation for OW was built around exponential ramp.

[gunit2004]

Can anyone explain how this feels better then the official expo settings? Cause those have been absolutely great for me, got me to GM this season finally.

Linear feels a lot more consistent in that the reticle consistently goes where I want it to go rather than me under or over shooting the enemy (I'm talking mostly hitscan heroes though).

What heroes do you usually main?

[neat]

Can anyone explain how this feels better then the official expo settings? Cause those have been absolutely great for me, got me to GM this season finally.

Linear feels a lot more consistent in that the reticle consistently goes where I want it to go rather than me under or over shooting the enemy (I'm talking mostly hitscan heroes though).

What heroes do you usually main?

Mainly hitscans McCree, Soldier with the occasional Roadhog/Zenyatta. I guess im having a hard time wanting to fix something that isnt broken for me, i've gotten used to those settings i guess. Maybe i'll try  these linear settings out this weekend in quickplay!

[liter]

I tried this out with my G502 spectrum mouse on a SteelSeries QcK cloth mousemat and switched back my original (exponential) configuration after 3 hours. Aiming felt really "floaty" to me. I'll just wait until Blizzard fixes the 0 to 15% issue that's described here: https://us.battle.net/forums/en/overwatch/topic/20754336532?page=22#post-431.

The way I see it, every console player is missing the highly sensitive 0-15% part of the linear curve. But I wonder whether a fix like that would warrant the training of a new ST?

[Taktikz]

I have no problems with Expo, especially now you can turn aim assist window down to 0, my aim pretty much goes where I want it now and feels mega smooth, if I miss, it's because my aims not good enough now, whereas before the new ST and Expo/AAW came along, it was sometimes because of the game making me miss.

[Zationysk]

My Curve for hip and ads with Linear Ramp starts at 8.5. I was using 8 like humanfemale recommended but then when I tried it with widowmaker I noticed that it was not catching some really small mouse movement and it got even better now

>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1ERslLzlDTVdha3V/iZOdp7G7xcjI:X4MB
<<< XIM4 END PASTE <<<

[JamesR4494]

Exponential with 0 Aim Smoothing feels a lot closer to PC Overwatch than this does.

I tried this method last night with a range of different adjustments and it felt very floaty/jittery no matter what I tried.

[goaty]

tried this yesterday. I played widowmaker mainly with 50 sens on 3200 dpi, relative zoom 100% and no ADS profile (was accidentaly off) and had a blast. Made the most ridicously shots, struggled a bit with easy shots, but that is probably just getting used to these settings.

On soldier it felt weird, but accuracy was still around what I normally get. I tried 50 and 55 sens, according to oversumo my crit skyrocketed, so will be testing some more this week

[Mouse N Keybord]

Can anyone explain how this feels better then the official expo settings? Cause those have been absolutely great for me, got me to GM this season finally.

XIM4s mouse translation for OW was built around exponential ramp.

https://us.battle.net/forums/en/overwatch/topic/20754336532?page=1
A 23 page post on the OW forums got moved into the bug section...still no answer from a blue(mod). I would still like to think Blizzard is going to mess with the dead zone next and hopefully fix it.

[gunit2004]

Just curious as to what firmware everyone is running with the Linear Ramp setup?

[Georoul]

So MAJOR thanks to Gunit2004 and humanfemale for helping crack this mystery.
To keep it short we've all noticed that the Linear ramp on Overwatch doesn't kick in right away. Obviously the deadzone is broken, they set it too far away from 0. Luckily our friends here figured out that you can use the Xim to makeup that deadzone and then you have an amazing setting!

1) Copy your buttons from your current profile
2) Create a new console crossover ST
3) Paste your buttons
4) Load up a practice skirmish; Linear Ramp; 0 Aim Smoothing; 100% Ingame Sens
5) Now start at the lowest part of your curve. Start kicking it up until you can SMOOTHLY move your mouse at a very slow speed (it will start choppy but as you move that number up you'll notice it'll smooth out and speed up, for me that was 12, for humanfemale it was 8 ) it seems to depend on your console, and mouse
6) Now add as much to the top of the curve as you did to the bottom. You'll have to do a little math (mine his 100% at 88% of the curve since I added 12 to the bottom)
7) Now you can mess was sensitivity. No need for a boost. I have Steady Aim on but.... oh and 1.5 Y/X

I didn't paste my curve in here because I think you should try to figured out your own. There really is no curve it's just adjusting the straight line for the deadzone. Too bad you can't just raise the whole curve line with one slider though this would literally be the ONLY application for that.

Enjoy and Report Back

With your setup (cc St & in game settings ) I made some changes that suits me better :
Y/X ratio 2,00
Boost 50
Steady aim off
Sensitivity 27,00
And finally a ballistic I made my own
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1Eh4qNkJOWmZyf4uOkZSXmpSNh4F7:X4MB
<<< XIM4 END PASTE <<<

My mouse 16k 1000hz
Thanks for your post my accuracy is better now

Just curious as to what firmware everyone is running with the Linear Ramp setup?

Firmware Version 4.00.20160405

[A Big Ol Bully]

So MAJOR thanks to Gunit2004 and humanfemale for helping crack this mystery.
To keep it short we've all noticed that the Linear ramp on Overwatch doesn't kick in right away. Obviously the deadzone is broken, they set it too far away from 0. Luckily our friends here figured out that you can use the Xim to makeup that deadzone and then you have an amazing setting!

1) Copy your buttons from your current profile
2) Create a new console crossover ST
3) Paste your buttons
4) Load up a practice skirmish; Linear Ramp; 0 Aim Smoothing; 100% Ingame Sens
5) Now start at the lowest part of your curve. Start kicking it up until you can SMOOTHLY move your mouse at a very slow speed (it will start choppy but as you move that number up you'll notice it'll smooth out and speed up, for me that was 12, for humanfemale it was 8 ) it seems to depend on your console, and mouse
6) Now add as much to the top of the curve as you did to the bottom. You'll have to do a little math (mine his 100% at 88% of the curve since I added 12 to the bottom)
7) Now you can mess was sensitivity. No need for a boost. I have Steady Aim on but.... oh and 1.5 Y/X

I didn't paste my curve in here because I think you should try to figured out your own. There really is no curve it's just adjusting the straight line for the deadzone. Too bad you can't just raise the whole curve line with one slider though this would literally be the ONLY application for that.

Enjoy and Report Back

With your setup (cc St & in game settings ) I made some changes that suits me better :
Y/X ratio 2,00
Boost 50
Steady aim off
Sensitivity 27,00
And finally a ballistic I made my own
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1Eh4qNkJOWmZyf4uOkZSXmpSNh4F7:X4MB
<<< XIM4 END PASTE <<<

My mouse 16k 1000hz
Thanks for your post my accuracy is better now

Just curious as to what firmware everyone is running with the Linear Ramp setup?

Firmware Version 4.00.20160405

Cool man, I'm glad you found something that works for you. Trust me you'll NEVER go back to Expo now.

[goaty]

Tried this for a couple of nights and it felt pretty good. Wasn't feeling it yesterday and switched back to exponential. Like coming home. Felt way more responsive

[MokSifu]

>>> XIM4 [Overwatch (Linear)] START PASTE >>>
X4C: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:X4C
<<< XIM4 END PASTE <<<

These are my settings on a G502 12k DPI 1000hz polling.

Felt so good on widowmaker in comp. Here's a video of me playing with it for the first time:

http://www.youtube.com/v/HpK-WtyWMLQ&hd=1

Link: http://www.youtube.com/watch?v=HpK-WtyWMLQ

[A Big Ol Bully]

>>> XIM4 [Overwatch (Linear)] START PASTE >>>
X4C:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAAAJABPAHYAZQByAHcAYQB0AGMAaAAgACgATABpAG4AZQBhAHIAKWcEBAEBAAAAAAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAAABgBIAGkAcAAAAAAAAAAAAAAAAAAADRYAvgAAAAAAAQAAABQeKDI8RlBaZG54goyWoKq0vsjIyGMEYBBggGJAAAAAAAAAAAAAAB1MAEABQAJhAXwCYQJiEGUQYEBiIGNAagRqAqAIagFpAWUIZQIAAAAAAAAAAAAAQAQAAAAAAAAAAKAEQBBACAAAAAAAAAAAAAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAAABgBBAGQAc0ACAAAAAAAAAAAAAAABBg4AyAAAAAAAAQAAAREbJS85Q01XYWt1f4mTnaexu8XGyGMEYBBggGJAAAAAAAAAAAAAAB1MAEABQAJhAXwCYQRiEGUQYEBiIGNAagRqAmmAagFpAWUIZQIAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1/////wAAAAAAAAAAAAAAAAABD6AAZAAAAAAAAAAAAAAKFB4oMjxGUFpkbniCjJagqrS+yAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1/////wAAAAAAAAAAAAAAAAABD6AAZAAAAAAAAAAAAAAKFB4oMjxGUFpkbniCjJagqrS+yAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1/////wAAAAAAAAAAAAAAAAABD6AAZAAAAAAAAAAAAAAKFB4oMjxGUFpkbniCjJagqrS+yAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1/////wAAAAAAAAAAAAAAAAABD6AAZAAAAAAAAAAAAAAKFB4oMjxGUFpkbniCjJagqrS+yAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA:X4C
<<< XIM4 END PASTE <<<

These are my settings on a G502 12k DPI 1000hz polling.

Felt so good on widowmaker in comp. Here's a video of me playing with it for the first time:

http://www.youtube.com/v/HpK-WtyWMLQ&hd=1

Link: http://www.youtube.com/watch?v=HpK-WtyWMLQ

Nice! the Pocket healer saved your a$$ a few times but looks like a good game!