My Battlefield 1 Settings Nov 20/2016

[SpotyFighter]

I am a bit confused...

Should I set Zoom Sensivity in Game to 200% or to 100%

Would be nice to have a summary of all the 16 sites

I use zombies curve and Hip Translator @ ADS.

[paymey]

finally I found the solution to my problems
Coefficient 133% up to 300% 
This changes everything
I like short mouse movements
when Coefficient  is 133% and I move  mouse slowly
i'm doing 360 degrees, when quickly 180 it was a big problem for me ( lag or something)
hard pad or soft pad no difference
300 % reduced the problem
my settings:
mouse 502 -12 k DPI
 soft pad
IN  GAME
sensitive literally everything 100%
USA: ON
XIM 4
HIP and ADS: I use ADS translator
HIP  50 %
ADS 25 %
 rest default

cheers 

[SpotyFighter]

Thanks mate !

I will try that this evening.  So you do not use the Zombie Curve in HIP?

I like short movements too... but never found a good config for high sense.

Do you have 12k DPI @ G502?

[Zombieguy]

I am a bit confused...

Should I set Zoom Sensivity in Game to 200% or to 100%

Would be nice to have a summary of all the 16 sites

I use zombies curve and Hip Translator @ ADS.

I tested the settings at 100%. My setup is the base setup to get everyone going but you can tweak it to how you like it. Start off with everything at 100% and then change a weapon you normally use to 200% and see what you like better. You might even like it at %150.

Also, if you have it 200% and then you change the weapon to 1.5x zoom or 2 or 2.5 etc everything could start going wacky. I encourage you to play with it and see what works for you. What ever you change just refere the setup here and compare your new settings.

[Soulbringer]

Hi zombie! And all who have the solution or answer.

I have the xim4 for about a month or 2 and started right away with your curve. I have the G502 at 12k dpi and a hard mousepad. I changed all settings as zombie wrote down. And i set the sensitivity to 8.5 bus when i swipe the mouse the xim4 blinks red all the time. I love to use the highest sensitivity possible. Any tips what to do?

Thx alot for all the work!

[Ial1987]

The Red Flash is just an Informationen for you that you reached the Maximum turn speed i think. Just dont look at the xim an play. If you can play without any issues dont care about the Red blink. But maybe im wrong the xim pros here can give you an answer 

[paymey]

@ SpotyFighter
Hi, all Curve default
DPI set max ,  but 4000 is also ok

I spent a couple days testing  xim4 and 502 in BF1
The biggest problem is the sniper.
How can I have a quick movements and precision at long range?
Well, Coefficient 133% up to 300%
 It helped me in this.

I tried 200% zoom and low sensitivity ADS: 15, 10, even 5%
but it was still very poorly with precision.


I tried 50% zoom and high sensitivity ADS 50, 100, even 500% lol 
similar effect
but for me
50% zoom and high sensitivity ADS 100 is better than 200% zomm and any ADS.

Try a few settings from this forum and then try change Coefficient 133% up to 300%
Let me know if this helps

[gkhoker]

I'm using Zombie HIP curves together with Tuffrabit ADS curves.
Works great for me though use guns with scope.
As for Rml curves is really good without scope,so I have two separate config.

My setup
Logitech RGB
Logitech cloth pad
Hori keypad
Dpi 4000
Hip 25
Ads 25 (use Ads translator as well)
uSa set to on and default.
All in game settings are default by the order.

Tuffrabit curves:
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANQAwADYAMAA2AA4cKDZCTlpkbniCjJagqrS+yMjI:X4MB
<<< XIM4 END PASTE <<<


Sent from my iPhone using Tapatalk

[tzeeth]

I'm using Zombie HIP curves together with Tuffrabit ADS curves.
Works great for me though use guns with scope.
As for Rml curves is really good without scope,so I have two separate config.

My setup
Logitech RGB
Logitech cloth pad
Hori keypad
Dpi 4000
Hip 25
Ads 25 (use Ads translator as well)
uSa set to on and default.
All in game settings are default by the order.

Tuffrabit curves:
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANQAwADYAMAA2AA4cKDZCTlpkbniCjJagqrS+yMjI:X4MB
<<< XIM4 END PASTE <<<


Sent from my iPhone using Tapatalk

Hi! So truffa for ads? Rest zombie?
Or you use on xim manager 2 config called for example truffa and the other zombie and change between scope or not?
Thanks!


Enviado desde mi iPhone utilizando Tapatalk

[gkhoker]

I'm using Zombie HIP curves together with Tuffrabit ADS curves.
Works great for me though use guns with scope.
As for Rml curves is really good without scope,so I have two separate config.

My setup
Logitech RGB
Logitech cloth pad
Hori keypad
Dpi 4000
Hip 25
Ads 25 (use Ads translator as well)
uSa set to on and default.
All in game settings are default by the order.

Tuffrabit curves:
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANQAwADYAMAA2AA4cKDZCTlpkbniCjJagqrS+yMjI:X4MB
<<< XIM4 END PASTE <<<


Sent from my iPhone using Tapatalk

Hi! So truffa for ads? Rest zombie?
Or you use on xim manager 2 config called for example truffa and the other zombie and change between scope or not?
Thanks!


Enviado desde mi iPhone utilizando Tapatalk

Yes!

1st config
HIP-Zombie, ADS Rml
2nd config
HIP-Zombie, ADS Truffrabit

Try both and find what your liking



Sent from my iPhone using Tapatalk

[tzeeth]

RML config where it is? Thanks!


Enviado desde mi iPhone utilizando Tapatalk

[tjciv1983]

What is turfrabbits curve supposed to accomplish? Thanks in advance 

[gkhoker]

RML config where it is? Thanks!


Enviado desde mi iPhone utilizando Tapatalk

Please check this thread for RML curve


Sent from my iPhone using Tapatalk

[HuwJarz]

finally I found the solution to my problems
Coefficient 133% up to 300% 
This changes everything
I like short mouse movements
when Coefficient  is 133% and I move  mouse slowly
i'm doing 360 degrees, when quickly 180 it was a big problem for me ( lag or something)
hard pad or soft pad no difference
300 % reduced the problem
my settings:
mouse 502 -12 k DPI
 soft pad
IN  GAME
sensitive literally everything 100%
USA: ON
XIM 4
HIP and ADS: I use ADS translator
HIP  50 %
ADS 25 %
 rest default

cheers 

Paymey

Thanks for posting this. I have also tried your settings and find them be infinitely superior to anything else I have tried. Thanks

[haBiBibash]

Ok so I'm a little confused.. In your first set of code, that is a curve for HIP correct? What and where do I put the second set of code because you said that ADS has no curve, thanks for your help