XIM Community

Modern Warfare & Infinite Warfare Setups (11/25/16)  (Read 38319 times)

Offline RML

  • MVP
  • *
  • Posts: 6939
  • AKA "KO" - PUBG Shield [ON]
    • View Profile
After spending some time with Zombies BF1 setup, I decided to revisit this thread and create a brand new setup that would smooth out the aiming transition between HIP and ADS. The real key to both of these setups isn't the curves, it's the ADS delay and the sensitivity settings. You can change the sensitivity to suit your style, however you MUST keep your HIP and ADS sens the same if you want this to work as intended. This new style of play has really improved my game with both of these titles.

Some Key points for both games:
- You must use the ADS delays provided!
- HIP and ADS sensitivity must be equal 1:1
- Do not use the ADS curve for sniping.


MODERN WARFARE:
This game has a REALLY slow ADS transition and I think that's where alot of people struggle with aiming in this game, that's the bad news. The good news is, I've figured out what that delay is and it's the same delay across all guns in this game. That's unique compared to most other games. So whether you're using an SMG or Sniping this delay will work for you as long as you keep your HIP and ADS sens the same.

HIP: This curve stays mostly Linear but accelerates at the end to help with quick turns when needed.
Code: [Select]
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAoUHigyPEZQWmRygpzIyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<



ADS: I use this curve for all guns except snipers. Snipers do not need a curve, just 1:1
Code: [Select]
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1ABEbJS85Q01XYWt1f4mTnaexu8XI:X4MB
<<< XIM4 END PASTE <<<







INFINITE WARFARE:
This game has a quick draw perk which changes the ADS delay time. The pic was created for guns with the quick draw attachment. If you're not using a quick draw attachment then your ADS delay should be set to 300. These settings are for all guns except Snipers. I haven't spent any time with snipers in this game yet sry. Once again, for this to work properly, your HIP and ADS sens must be the same.

HIP:
Code: [Select]
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAoUHigyPEZQWmRygpzIyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<


ADS:
Code: [Select]
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1ABEbJS85Q01XYWt1f4mTnaexu8XI:X4MB
<<< XIM4 END PASTE <<<




Yes, I am well aware that the curves are exactly the same for both games. That's because they both achieve the same goal. For HIP I want to be able to turn around quickly and yet keep things mostly Linear so that it doesn't mess with the transition between HIP and ADS. The ADS curve is just a small burst of acceleration to help with AA. The Sensitivity settings are what makes the curves work for the individual games. That's not saying that you have to use the exact sens that I am. You can change it, just make sure you change HIP and ADS. THEY HAVE TO HAVE THE SAME SENS.  :)


CHEERS!
« Last Edit: 05:42 PM - 11/25/16 by RML »

Offline Dale

  • MVP
  • *
  • Posts: 4821
  • What would the great lion do?
    • View Profile
  • Gamertag: DaleisGOD
Re: MWR & IW Setups
« Reply #1 on: 01:01 AM - 11/11/16 »
Switching to the ST on this game made a world of difference.

scrotesmd

  • Guest
Re: MWR & IW Setups
« Reply #2 on: 03:23 AM - 11/11/16 »
Same as me rml I'm really liking iw  but not enjoying mwr

Offline Lord Of The Sith

  • MVP
  • *
  • Posts: 8157
  • Made up from mostly non toxic materials.
    • View Profile
Re: MWR & IW Setups
« Reply #3 on: 10:10 AM - 11/11/16 »
I DM'd you the other day. What FW are you on RML? Unless I missed it, it wasn't listed under you BOPs3 settings.
Click > Here < for my COD4:RM / BOPs3 XIM4 Setup.

XIM4: FAQ - Downloads - Hardware Compatibility

Offline Gurnaldo

  • MVP
  • *
  • Posts: 1670
    • View Profile
Re: MWR & IW Setups
« Reply #4 on: 10:29 AM - 11/11/16 »
Not tried the curve but we do appreciate you sharing RML so good work.

I dont agree with you on the netcode for IW you but thats just our opinions XD.

Offline nobodyfamous

  • MVP
  • *
  • Posts: 922
  • nerd with muscles
    • View Profile
Re: MWR & IW Setups
« Reply #5 on: 10:32 AM - 11/11/16 »
so using Modern Warfare ST is for the Remastered? we sure about this
"If steroids and other performance enhancing drugs are illegal for athletes,
doesn't that mean you're cheating in eSports and should be banned ?"



Astro Mixamp Pro 2013 / Sennheiser HD598
BenQ RL2460HT / BenQ XL2430T
Logitech G303 / CM Quickfire Stealth (Reds)
Rode Procaster / Rode PSA1
Roland Quad-Capture / Adam F5's / Adam F8Sub

Offline Lord Of The Sith

  • MVP
  • *
  • Posts: 8157
  • Made up from mostly non toxic materials.
    • View Profile
Re: MWR & IW Setups
« Reply #6 on: 11:40 AM - 11/11/16 »
so using Modern Warfare ST is for the Remastered? we sure about this

See @mist4fun soo much confusion. XD. It needed to have something next to it to show it was the RM ST..

@nobodyfamous Yes just select X1/PS4 whichever system you're playing on, and it's the RM version ST.
Click > Here < for my COD4:RM / BOPs3 XIM4 Setup.

XIM4: FAQ - Downloads - Hardware Compatibility

Offline Lord Of The Sith

  • MVP
  • *
  • Posts: 8157
  • Made up from mostly non toxic materials.
    • View Profile
Re: MWR & IW Setups
« Reply #7 on: 12:52 PM - 11/13/16 »
Well I guess I'm on your ignore list then..

Sorry for any pain I may have caused you.

I think I remember ripping on you about your finger nails? Cmon man, that's just classic male bants.
It's cool though. No problems. :)
Click > Here < for my COD4:RM / BOPs3 XIM4 Setup.

XIM4: FAQ - Downloads - Hardware Compatibility

Offline RML

  • MVP
  • *
  • Posts: 6939
  • AKA "KO" - PUBG Shield [ON]
    • View Profile
Re: MWR & IW Setups
« Reply #8 on: 07:54 AM - 11/14/16 »
^ No worries, between the EPIC BF1 and life I've just been busy. Missed your question. I'm on the latest "release candidate firmware".

Offline Sindonesia

  • Member
  • *
  • Posts: 75
    • View Profile
Re: MWR & IW Setups
« Reply #9 on: 09:17 AM - 11/14/16 »
What delay are you using if any? Thanks for sharing your setup.

Offline RML

  • MVP
  • *
  • Posts: 6939
  • AKA "KO" - PUBG Shield [ON]
    • View Profile
Re: MWR & IW Setups
« Reply #10 on: 09:32 AM - 11/14/16 »
The latest firmware supports progressive delay, so I use the OBsIV recommended setting. I believe that was 220, not 100% sure and can't check ATM. But it is whatever the recommendation was.


Not tried the curve but we do appreciate you sharing RML so good work.

I dont agree with you on the netcode for IW you but thats just our opinions XD.

The games I played were flawless, but it may very well have just been a good day. TBH, I spent about 4hrs. with this game and haven't played it since. Why? Because this game is ridiculously AWESOME and it's currently all I think about playing when I have the time to play. I've always been a BF fan, but this games by far the best the series has ever put out. And to think I really was disappointed with the beta.



« Last Edit: 09:42 AM - 11/14/16 by RML »

Offline Gurnaldo

  • MVP
  • *
  • Posts: 1670
    • View Profile
Re: MWR & IW Setups
« Reply #11 on: 10:26 AM - 11/14/16 »
I hated the Beta too but agree that its an immersive fps for sure.  Not without faults but still enjoyable even for someone who hasn't pld much BF and hates vehicles XD

Offline Sindonesia

  • Member
  • *
  • Posts: 75
    • View Profile
Re: MWR & IW Setups
« Reply #12 on: 10:36 AM - 11/14/16 »
It looks like the default delay is 223.

Offline Lord Of The Sith

  • MVP
  • *
  • Posts: 8157
  • Made up from mostly non toxic materials.
    • View Profile
Re: MWR & IW Setups
« Reply #13 on: 10:39 AM - 11/14/16 »
^ No worries, between the EPIC BF1 and life I've just been busy. Missed your question. I'm on the latest "release candidate firmware".

I guess that's what you call over thinking a situation. XD.

I'm going to have to jump on your advanced settings thread for a conversation when I get 5mins to do so.
Click > Here < for my COD4:RM / BOPs3 XIM4 Setup.

XIM4: FAQ - Downloads - Hardware Compatibility

Offline bimmers

  • Member
  • *
  • Posts: 45
    • View Profile
  • PSN ID: bimmers525i
Re: MWR & IW Setups
« Reply #14 on: 02:21 PM - 11/15/16 »
No high dpi?

Sent from my LG-H345 using Tapatalk



Admin