XIM Community

The Anti-Aim Assist curve set for any game. (Updated 3/22/18)  (Read 87281 times)

Offline quertz

  • Member
  • *
  • Posts: 77
  • Less QQ more pew pew
    • View Profile
  • Gamertag: Mr Dr Pwnrbangr
Was curious so I've been using the hip curve on Halo 5 for the last few days and it works well after I got used to it. Not perfect, but I have decided that it's an improvement over no curve. I am running 3.9 sens at 3200 dpi.
XBOX ONE | KEYBOARD: STEELSERIES 6GV2 | MOUSE: STEELSERIES RIVAL 600 | PAD: ARTISAN HIEN |

Offline RML

  • MVP
  • *
  • Posts: 5187
  • L1vE DiFfeR3nT
    • View Profile
Was curious so I've been using the hip curve on Halo 5 for the last few days and it works well after I got used to it. Not perfect, but I have decided that it's an improvement over no curve. I am running 3.9 sens at 3200 dpi.


Yeah if you're going from vanilla ST "no curve" to my hip curve it does take some getting used to. From vanilla settings you should basically be able to turn your sens down about 25%. The lower sens will give you a little more sticky aim with smaller movements while still being able to do quick 180's like you would be able to do with a higher sens and no curve.



« Last Edit: 07:13 AM - 07/27/17 by RML »
XXX | C:M$ | XIM APEX | Latest | BenQ 24" Monitor | Pad: Steel Series 9HD | Sony Nav | A: Sennheiser 650's/Mod mic/Sound Blaster X7 | M: G502 | D: 12,000 | P: 1000 | AAA Setup [on]

Advanced Settings Info - http://community.xim.tech/index.php?topic=41264.0
Anti Aim Assist curve set for ANY FPS Game -
 http://community.xim.tech/index.php?topic=49063.0
Destiny 1&2 Advanced Settings - https://community.xim.tech/index.php?topic=56658.msg626940#msg626940

Offline RML

  • MVP
  • *
  • Posts: 5187
  • L1vE DiFfeR3nT
    • View Profile
i used your setup for BO3 and MWR ... its perfect
:)
XXX | C:M$ | XIM APEX | Latest | BenQ 24" Monitor | Pad: Steel Series 9HD | Sony Nav | A: Sennheiser 650's/Mod mic/Sound Blaster X7 | M: G502 | D: 12,000 | P: 1000 | AAA Setup [on]

Advanced Settings Info - http://community.xim.tech/index.php?topic=41264.0
Anti Aim Assist curve set for ANY FPS Game -
 http://community.xim.tech/index.php?topic=49063.0
Destiny 1&2 Advanced Settings - https://community.xim.tech/index.php?topic=56658.msg626940#msg626940

Offline Jister

  • Member
  • *
  • Posts: 98
    • View Profile
why not just turn off the aim assist? isnt that the point of the mouse in the first place?

Offline RML

  • MVP
  • *
  • Posts: 5187
  • L1vE DiFfeR3nT
    • View Profile
why not just turn off the aim assist? isnt that the point of the mouse in the first place?


Depends on the user. If you're really interested why I don't turn off AA just read the OP.

XXX | C:M$ | XIM APEX | Latest | BenQ 24" Monitor | Pad: Steel Series 9HD | Sony Nav | A: Sennheiser 650's/Mod mic/Sound Blaster X7 | M: G502 | D: 12,000 | P: 1000 | AAA Setup [on]

Advanced Settings Info - http://community.xim.tech/index.php?topic=41264.0
Anti Aim Assist curve set for ANY FPS Game -
 http://community.xim.tech/index.php?topic=49063.0
Destiny 1&2 Advanced Settings - https://community.xim.tech/index.php?topic=56658.msg626940#msg626940

Offline neat

  • Member
  • *
  • Posts: 123
    • View Profile
This decent for BF1? Might try it out :)

Offline RML

  • MVP
  • *
  • Posts: 5187
  • L1vE DiFfeR3nT
    • View Profile
This decent for BF1? Might try it out :)

It's the best BF1, BO3, MWR, BF4, IW and Ghost setup I've ever used. But I created it to my liking, so I'm a tad bias. Read the OP, if it sounds like a setup that may help you then give it a go. Just please follow my instructions on how to set it up. My "official" BF1 Setup is linked in my signature. It's the same curves but offers more info and tips on playing BF1 on XIM.

BTW... you appear to be semi new to XIM, so a little advice. Don't feel like you have to use others setups with curves, etc. to make games playable. You may simply have to adjust your Sensitivity and be very happy with it. XIM4 is an amazing product and most don't want or need to use advanced settings like I do.
« Last Edit: 06:29 AM - 07/29/17 by RML »
XXX | C:M$ | XIM APEX | Latest | BenQ 24" Monitor | Pad: Steel Series 9HD | Sony Nav | A: Sennheiser 650's/Mod mic/Sound Blaster X7 | M: G502 | D: 12,000 | P: 1000 | AAA Setup [on]

Advanced Settings Info - http://community.xim.tech/index.php?topic=41264.0
Anti Aim Assist curve set for ANY FPS Game -
 http://community.xim.tech/index.php?topic=49063.0
Destiny 1&2 Advanced Settings - https://community.xim.tech/index.php?topic=56658.msg626940#msg626940

Offline fraser.price21

  • Member
  • *
  • Posts: 6
    • View Profile
  • Gamertag: TheRakishRabbit
Quick question with regards to MWR.

Do you have both of the AA settings enabled in the options (aka, slowdown and rotation)?

And also, if one were to find the aim to be a bit sticky, how would one attempt to correct that starting with your curve as a base :).

Gushy side note: your work is outstanding. Keeps noobs from being overwhelmed by customisation :).

Offline Nettitan

  • Member
  • *
  • Posts: 9
    • View Profile
Hello and thank you very much for your amazing job. Im new in the xim4 world, i was playing destiny on ps4 in the past and now i tried your settings, the are very nice but the sensitivity is very low for me. Should i add more dpi or more sensitivity and if i should add more sensitivity can i do this in the same way for Hip and ADS? (ex: +3 and +3) What i want to ask is, can i use any kind of sensitivity with your curve?

Thank you in advance!

Offline RML

  • MVP
  • *
  • Posts: 5187
  • L1vE DiFfeR3nT
    • View Profile
Quick question with regards to MWR.

Do you have both of the AA settings enabled in the options (aka, slowdown and rotation)?

And also, if one were to find the aim to be a bit sticky, how would one attempt to correct that starting with your curve as a base :).

Gushy side note: your work is outstanding. Keeps noobs from being overwhelmed by customisation :).

Yes both slowdown and rotation are on.

Everyone has a different idea of what's TOO sticky, you should adjust your sensitivity until it feels right to you. Too sticky = raise sens, not sticky enough = lower sens.

I'm glad it helped you, sticky aim "was" a real problem for me as well.



Hello and thank you very much for your amazing job. Im new in the xim4 world, i was playing destiny on ps4 in the past and now i tried your settings, the are very nice but the sensitivity is very low for me. Should i add more dpi or more sensitivity and if i should add more sensitivity can i do this in the same way for Hip and ADS? (ex: +3 and +3) What i want to ask is, can i use any kind of sensitivity with your curve?

Thank you in advance!

Yes you can apply any sens you'd like to the curves. Will that change the behavior slightly "yes". But that's not necessarily a bad thing. As stated above everyone has their personal preferences when it comes to Sens and Aim Assist.

Destiny is one of the more challenging games with XIM4 due to it's slow turn speed cap. That being said, a little advice... sometimes less = more. What I mean is, games with slow Turn speeds respond better to consistent movements of your mouse. You can hit the cap and the light will flash at you, and that's all good. But if you do it too much it will start to become a problem. The key is to not have wasted movement. So practice consistent movement that registers on screen. It definitely helps with this game and pretty much all games with XIM.

Good luck and Welcome to the Community!  :)




XXX | C:M$ | XIM APEX | Latest | BenQ 24" Monitor | Pad: Steel Series 9HD | Sony Nav | A: Sennheiser 650's/Mod mic/Sound Blaster X7 | M: G502 | D: 12,000 | P: 1000 | AAA Setup [on]

Advanced Settings Info - http://community.xim.tech/index.php?topic=41264.0
Anti Aim Assist curve set for ANY FPS Game -
 http://community.xim.tech/index.php?topic=49063.0
Destiny 1&2 Advanced Settings - https://community.xim.tech/index.php?topic=56658.msg626940#msg626940

Offline casual_gamer_

  • Member
  • *
  • Posts: 21
    • View Profile
Can you please post one for The Division? Will compensate for your time.

Offline RML

  • MVP
  • *
  • Posts: 5187
  • L1vE DiFfeR3nT
    • View Profile
Can you please post one for The Division? Will compensate for your time.

Sry I don't play The Division.
XXX | C:M$ | XIM APEX | Latest | BenQ 24" Monitor | Pad: Steel Series 9HD | Sony Nav | A: Sennheiser 650's/Mod mic/Sound Blaster X7 | M: G502 | D: 12,000 | P: 1000 | AAA Setup [on]

Advanced Settings Info - http://community.xim.tech/index.php?topic=41264.0
Anti Aim Assist curve set for ANY FPS Game -
 http://community.xim.tech/index.php?topic=49063.0
Destiny 1&2 Advanced Settings - https://community.xim.tech/index.php?topic=56658.msg626940#msg626940

Offline RML

  • MVP
  • *
  • Posts: 5187
  • L1vE DiFfeR3nT
    • View Profile
Several members have been asking me what I'm going to be using with Destiny 2. While this is it. I'll be using the Destiny ST with these curves until the Destiny 2 ST is created. At least this will be my starting point.
XXX | C:M$ | XIM APEX | Latest | BenQ 24" Monitor | Pad: Steel Series 9HD | Sony Nav | A: Sennheiser 650's/Mod mic/Sound Blaster X7 | M: G502 | D: 12,000 | P: 1000 | AAA Setup [on]

Advanced Settings Info - http://community.xim.tech/index.php?topic=41264.0
Anti Aim Assist curve set for ANY FPS Game -
 http://community.xim.tech/index.php?topic=49063.0
Destiny 1&2 Advanced Settings - https://community.xim.tech/index.php?topic=56658.msg626940#msg626940

Offline ilpapero

  • Member
  • *
  • Posts: 37
    • View Profile
i've notice 0.85 ratio Y/X?
i've to use with that curves? alway had 1 of rateo in every games..
« Last Edit: 10:43 AM - 09/05/17 by ilpapero »

Offline RML

  • MVP
  • *
  • Posts: 5187
  • L1vE DiFfeR3nT
    • View Profile
i've notice 0.85 ratio Y/X?
i've to use with that curves? alway had 1 of rateo in every games..

It's just a personal preference thing for me. I personally tend to struggle with over aiming on the Y axis, especially on games when jumping/wall running etc. is involved. I find my aim is a little more accurate with a lower Y ratio. I'm sure others will disagree and say a higher Y helps with recoil, etc, etc. However, I personally do not struggle with recoil control. Also,If you notice the max game turn speed is always much lower with the Y axis compared to X. Just move your muse up and down and see how fast the light flashes red at you.

That being said, I would recommend for everyone to start out at a 1.0 ratio and go from there.
XXX | C:M$ | XIM APEX | Latest | BenQ 24" Monitor | Pad: Steel Series 9HD | Sony Nav | A: Sennheiser 650's/Mod mic/Sound Blaster X7 | M: G502 | D: 12,000 | P: 1000 | AAA Setup [on]

Advanced Settings Info - http://community.xim.tech/index.php?topic=41264.0
Anti Aim Assist curve set for ANY FPS Game -
 http://community.xim.tech/index.php?topic=49063.0
Destiny 1&2 Advanced Settings - https://community.xim.tech/index.php?topic=56658.msg626940#msg626940