XIM Community

Can not pair XiM4 to PC  (Read 4258 times)

Offline htFade

  • Member
  • *
  • Posts: 49
    • View Profile
  • Gamertag: Hot Top Fade
Can not pair XiM4 to PC
« on: 06:51 PM - 06/12/16 »
Okay... got a new lap top. Want to run XiM4 through wired mode with the Belkin transfer cable. I did the factory reset and firmware update (3x!!!) and uninstalled and reinstalled the new manager (3x!!!) with no luck.

 "Paired XIM not found [6]"

What on earth am I doing wrong?!?!?! 

Thanks, Brian

Offline htFade

  • Member
  • *
  • Posts: 49
    • View Profile
  • Gamertag: Hot Top Fade
Re: Can not pair XiM4 to PC
« Reply #1 on: 07:09 PM - 06/12/16 »
I can connect via blue tooth. I need to continue to run commander though. Idk...

Offline Od1n

  • Global Moderator
  • MVP
  • *
  • Posts: 34116
    • View Profile
Re: Can not pair XiM4 to PC
« Reply #2 on: 07:14 PM - 06/12/16 »
hey,

how is your wiring looking like exactly?
and are you using xim commander or xim sandhawc?
PS5 & X1 | C: MS | XIM Apex & Nexus | FW: the latest ofc! :) | Mon: BenQ XL2420Z | Pad: Zowie G-SR | KB: Ducky DK1008L Cherry Red O-Rings| A: AKG K701 Creative X7 Antlion Modmic | M: Glorious Model O | D: 1800 | P: 1000hz | BF4 4 HIP: 35 ADS: 20

My Fortnite Creator Code: beamimpact
Check out my Youtube Channel: XIM Central

Offline htFade

  • Member
  • *
  • Posts: 49
    • View Profile
  • Gamertag: Hot Top Fade
Re: Can not pair XiM4 to PC
« Reply #3 on: 07:17 PM - 06/12/16 »
I'm running Xim Commander
input 1_Belkin cable
input 2_nothing
input 3_X1 controller

Offline htFade

  • Member
  • *
  • Posts: 49
    • View Profile
  • Gamertag: Hot Top Fade
Re: Can not pair XiM4 to PC
« Reply #4 on: 07:18 PM - 06/12/16 »
And of coarse Xim4 is connected to the X1 via the included USB cable

Offline htFade

  • Member
  • *
  • Posts: 49
    • View Profile
  • Gamertag: Hot Top Fade
Re: Can not pair XiM4 to PC
« Reply #5 on: 07:40 PM - 06/12/16 »
I went back to my desk top and noticed that Xim manager says "commander mode" at the top of the window. Is there a special version of XManager I need?

And not able to connect VIA the desk top either now.

Forgot about running manager in commander mode. Did that... now manager attempts to connects and just stops responding. When this happen the XiM4 lights are white.

Now getting connection error 10048

Can't connect via blue tooth now. Feel like I'm making more of a mess. I'll just wait for some much needed help. :(
« Last Edit: 08:49 PM - 06/12/16 by htFade »

Offline Od1n

  • Global Moderator
  • MVP
  • *
  • Posts: 34116
    • View Profile
Re: Can not pair XiM4 to PC
« Reply #6 on: 08:00 AM - 06/13/16 »
please undo your /commander extension to the desktop shortcut and use xim sandhawc
its a much more advanced xim commander where a lot of bugs have been ironed out, eg you no longer need to set the manager into commander mode
this would greatly help to isolate your problem, the setup of xim sandhawc and its core function are exactly the same as with xim commander

aside from that sandhawc has much better polling syncronisation giving you better mouse movements

here the link to the download: http://xim4.com/community/index.php?topic=43522.0
and here a guide: http://xim4.com/community/index.php?topic=43557.0
PS5 & X1 | C: MS | XIM Apex & Nexus | FW: the latest ofc! :) | Mon: BenQ XL2420Z | Pad: Zowie G-SR | KB: Ducky DK1008L Cherry Red O-Rings| A: AKG K701 Creative X7 Antlion Modmic | M: Glorious Model O | D: 1800 | P: 1000hz | BF4 4 HIP: 35 ADS: 20

My Fortnite Creator Code: beamimpact
Check out my Youtube Channel: XIM Central

Offline htFade

  • Member
  • *
  • Posts: 49
    • View Profile
  • Gamertag: Hot Top Fade
Re: Can not pair XiM4 to PC
« Reply #7 on: 03:44 PM - 06/14/16 »
Installed sandhawc. Still have same issues connecting. XIM lights go white. 

Offline Od1n

  • Global Moderator
  • MVP
  • *
  • Posts: 34116
    • View Profile
Re: Can not pair XiM4 to PC
« Reply #8 on: 04:09 PM - 06/14/16 »
that is because your xim firmware doesnt match the xim commander you are using
please make sure your xim is on the very same firmware as your xim commander
PS5 & X1 | C: MS | XIM Apex & Nexus | FW: the latest ofc! :) | Mon: BenQ XL2420Z | Pad: Zowie G-SR | KB: Ducky DK1008L Cherry Red O-Rings| A: AKG K701 Creative X7 Antlion Modmic | M: Glorious Model O | D: 1800 | P: 1000hz | BF4 4 HIP: 35 ADS: 20

My Fortnite Creator Code: beamimpact
Check out my Youtube Channel: XIM Central

Offline htFade

  • Member
  • *
  • Posts: 49
    • View Profile
  • Gamertag: Hot Top Fade
Re: Can not pair XiM4 to PC
« Reply #9 on: 04:11 PM - 06/14/16 »
Di I use the latest firmware with sandhawc?

Offline htFade

  • Member
  • *
  • Posts: 49
    • View Profile
  • Gamertag: Hot Top Fade
Re: Can not pair XiM4 to PC
« Reply #10 on: 04:32 PM - 06/14/16 »
Now... when I fire up Sandhawc I get an error that has something to do with "illegal characters in path"

BTW... latest with botm manager and XiM firmware. Still not connecting.

« Last Edit: 04:58 PM - 06/14/16 by htFade »

Offline htFade

  • Member
  • *
  • Posts: 49
    • View Profile
  • Gamertag: Hot Top Fade
Re: Can not pair XiM4 to PC
« Reply #11 on: 02:11 PM - 06/15/16 »
idk... if there was a way to use my Ultra stik 360 running wireless I would absolutely do that. Still can not connect via easy transfer cable.  :(

Offline Od1n

  • Global Moderator
  • MVP
  • *
  • Posts: 34116
    • View Profile
Re: Can not pair XiM4 to PC
« Reply #12 on: 02:42 PM - 06/15/16 »
there is only one version of sandhawc at the moment so you should have the correct one
either your xim manager or your xim firmware is not on the correct firmware though
current sandhawc built: http://xim4.com/community/index.php?topic=43522.0

please install the following xim firmware: http://xim4.com/community/index.php?topic=46143.0

and please deinstall your xim manager on pc and then install this one
it should work then: http://xim4.com/community/index.php?topic=46144.0

when you have installed the xim manager please dont change the target path, xim sandhawc takes care of that
PS5 & X1 | C: MS | XIM Apex & Nexus | FW: the latest ofc! :) | Mon: BenQ XL2420Z | Pad: Zowie G-SR | KB: Ducky DK1008L Cherry Red O-Rings| A: AKG K701 Creative X7 Antlion Modmic | M: Glorious Model O | D: 1800 | P: 1000hz | BF4 4 HIP: 35 ADS: 20

My Fortnite Creator Code: beamimpact
Check out my Youtube Channel: XIM Central

Offline htFade

  • Member
  • *
  • Posts: 49
    • View Profile
  • Gamertag: Hot Top Fade
Re: Can not pair XiM4 to PC
« Reply #13 on: 04:05 PM - 06/15/16 »
Did all of that. Followed all the links to be sure I was getting the correct files. Same results. SandhawC gives me the same "illegal characters in path" message. XiM again connects via BT but nothing via transfer cable.

I did NOT change the target path. Just installed and attempted to run it.

Offline Od1n

  • Global Moderator
  • MVP
  • *
  • Posts: 34116
    • View Profile
Re: Can not pair XiM4 to PC
« Reply #14 on: 05:20 PM - 06/15/16 »
that is honestly really really strange, i now would suggest you to either create a topic in the "XIM Commander" sub forum to get w11ce respond to you or pm right right away
w11ce is the guy who programmed sandhawc and he surely can solve your issue
PS5 & X1 | C: MS | XIM Apex & Nexus | FW: the latest ofc! :) | Mon: BenQ XL2420Z | Pad: Zowie G-SR | KB: Ducky DK1008L Cherry Red O-Rings| A: AKG K701 Creative X7 Antlion Modmic | M: Glorious Model O | D: 1800 | P: 1000hz | BF4 4 HIP: 35 ADS: 20

My Fortnite Creator Code: beamimpact
Check out my Youtube Channel: XIM Central