XIM4 [Firmware 20160405]

[OBsIV]

If you are using an Xbox One S or PlayStation 4 Pro/Slim controllers or are having hardware compatibility issues, please install our latest firmware.
WARNING: If you are upgrading from 20141114 or earlier than this update is a BREAKING CHANGE and requires a Restore Factory Defaults of your XIM4. You will lose all your settings and will need to re-pair XIM4 to your devices.

NOTE: This firmware requires using Manager version 20160405 or later to function.

Please see Release Notes for additional details about this build.

Download XIM4 Firmware Tool 20160405 for PC
Windows Vista/7/8/8.1/10 x86/x64

Download XIM4 Firmware Tool 20160405 for Mac
OSX 10.11 or higher

XIM4 firmware is designed to be used worldwide with exception of Japan where wireless use is not certified. XIM4s sold in Japan therefore have a special firmware version (available here) that disables the on-board Bluetooth module.

User Experience Changes:

- On startup, your XIM4 will now notify you when initialization is complete by displaying four rapid green blinks.
- Pressing the PS button on your Dualshock 4 is no longer required at startup (your controller will now connect automatically).
- Your XIM4 will now inform you with flashing quick purple lights if it's detecting conditions that may be causing performance degradation. Let us know if you see this light.

Changes:

NEW: XIM4 Smart Translators V2 aiming fidelity upgrade
NEW: XIM4 Manager support for iOS 8 and above devices (iPhone 4s and iPad 3rd-gen and above)
NEW: PlayStation 4 Touchpad Support
NEW: Use next-gen controllers cross next-gen console (X1 ->PS4) (PS4 -> X1)
NEW: Use next-gen controllers (X1, PS4) on last-gen consoles (X360, PS3)
NEW: Storage increased to 24 Configs (was 16)
NEW: Simulated ADS Toggle (with customizable "Deactivation" keys)
NEW: Progressive Delay blended Hip to ADS transition
NEW: Steady Aim feature that optimizes Auto Aim (best with CoD ADS)
NEW: Turn Assist for better control of vehicles and turrets
NEW: PlayStation 4 controller automatic turn on at startup
NEW: Config load via hotkeys while Manager is connected
NEW: “System ready” indication light (4 rapid green blinks)
NEW: Warning light notification (yellow-pulses) if peripheral communication is lost
NEW: Support for Logitech 3D Extreme Pro Joystick
NEW: Backup/Restore of Configs/Globals via Flash Tool

FIX: Atheros Bluetooth chipset compatibility
FIX: Xbox One audio quality issues
FIX: Better support for hubs/switches
FIX: Xbox One controller w/integrated audio jack compatibility
FIX: Xbox One Elite controller compatibility (including cross console)
FIX: XIM4 remains on when console is turned off
FIX: Commander input timing improvements
FIX: Hardware compatibility improvements


Instructions:

• Hold down the 'P' button on the back of your XIM4
• Plug your XIM4 into your computer while continuing to hold the 'P' button
• Wait for your XIM4's light to display blue and then release the 'P' button
• Download and run the XIM4Flash tool
• Select Factory Reset (requires re-pair of your XIM4 to your devices)
• Disconnect your XIM4 from your computer after the tool completes

                                                                      BUILD HISTORY

Build 20141114

FIX: Some connected gaming hardware can cause Bluetooth pairing and connection failures
FIX: Distorted “robotic” audio on Xbox One
FIX: Controller shuts off intermittently when audio is active on Xbox One
FIX: Keystrokes that mice emit can sometimes stick
FIX: Intermittent mouse disconnects
FIX: Intermittent freezes in Manager wireless mode
FIX: Can't connect Manager if Nav is connected wirelessly first
FIX: Sony Move Nav in wireless mode causes sudden “phantom” aim and movement
FIX: Vibration on PS4 causing XIM4 power-faults
FIX: Impulse trigger rumble on Xbox One causing XIM4 power-faults
FIX: Entering “on-the-fly” Config mode on PS4 pauses the game preventing aim sensitivity adjustment
FIX: Terminating Manager prevents Config Hotkeys from working
FIX: USB timing sync issues on some PS3s
FIX: Removing a Settings that is active should revert back to Hip
FIX: Incorrect binding displayed if "None" is used as Settings hotkey
FIX: Keyboard support (Logitech G510, Steeleseries 6Gv2, Stinkyfoot)
CHANGE: Power-fault light notification length increased
NEW: Enable USB device hot-swap feature for KVMs
NEW: Swap Joystick sticks feature

Build 20140619

Launch Gold Build