XIM Community

XIM4 Firmware 20151120 (Feedback)  (Read 42698 times)

Offline Souljazz

  • Member
  • *
  • Posts: 45
    • View Profile
Re: XIM4 Firmware 20151120 (Feedback)
« Reply #210 on: 12:04 PM - 12/22/15 »
Is not re cognizant every time..probably a bug

Offline OBsIV

  • Administrator
  • MVP
  • *
  • Posts: 44153
  • It's obsessive.
    • View Profile
    • OBsIV's Blog
Re: XIM4 Firmware 20151120 (Feedback)
« Reply #211 on: 12:05 PM - 12/22/15 »
hi guys i've been using xim4 for like 3months now, first i was using the old firmware 2014 there's no problem using it, then i installed the latest 20151120 firmware for black ops 3, now im having this random disconnection of m&k, happened to me like 5x now since last week.

As i said before in my posts - same here. I downgraded back to 112014 and i played whole weekend without single dc. I really think it is fw related instead of cable related and i will stay on 112014 and i recomend anyone who has issues on 2015 to downgrade as well and check if problem is solved or not. For me it worked just fine.

We need to get to the bottom of this one.

When you say you m&k stop working, do you see any other type of error message or light sequence on your XIM4 that occurs? Do you see a controller disconnect message at all? Anything out of the ordinary other than your m&k stop working?
Get the most out of your XIM NEXUS, read the XIM NEXUS Support FAQ.

Xorag2190

  • Guest
Re: XIM4 Firmware 20151120 (Feedback)
« Reply #212 on: 04:46 PM - 12/22/15 »
Hi all. I posted a while back that I had been getting stuck keys on the latest firmware. this still happens once or twice per halo 5 round. fairly easy to fix by tapping the stuck key again. I only noticed this with directional keys such as wasd or shift. let me know if anyone else has seen this and if I can contribute to the tshooting.

Offline fung2189

  • Member
  • *
  • Posts: 4
    • View Profile
  • PSN ID: fung2189
Re: XIM4 Firmware 20151120 (Feedback)
« Reply #213 on: 09:44 AM - 12/23/15 »
hi guys i've been using xim4 for like 3months now, first i was using the old firmware 2014 there's no problem using it, then i installed the latest 20151120 firmware for black ops 3, now im having this random disconnection of m&k, happened to me like 5x now since last week.

As i said before in my posts - same here. I downgraded back to 112014 and i played whole weekend without single dc. I really think it is fw related instead of cable related and i will stay on 112014 and i recomend anyone who has issues on 2015 to downgrade as well and check if problem is solved or not. For me it worked just fine.

We need to get to the bottom of this one.

When you say you m&k stop working, do you see any other type of error message or light sequence on your XIM4 that occurs? Do you see a controller disconnect message at all? Anything out of the ordinary other than your m&k stop working?

no controller disconnection message but the xim4 will start to blink in different colors, so i have to re-plug it again to reset the xim4

Hi all. I posted a while back that I had been getting stuck keys on the latest firmware. this still happens once or twice per halo 5 round. fairly easy to fix by tapping the stuck key again. I only noticed this with directional keys such as wasd or shift. let me know if anyone else has seen this and if I can contribute to the tshooting.

and also this one also happened to me twice since changing to 2015 firmware, 1 is the directional getting stuck then another one is my left click (trigger key) stuck

Offline OBsIV

  • Administrator
  • MVP
  • *
  • Posts: 44153
  • It's obsessive.
    • View Profile
    • OBsIV's Blog
Re: XIM4 Firmware 20151120 (Feedback)
« Reply #214 on: 01:13 PM - 12/23/15 »
no controller disconnection message but the xim4 will start to blink in different colors, so i have to re-plug it again to reset the xim4

This is very important -- which colors exactly is it flashing.

20151120 is less tolerant to misbehaving peripherals than prior builds. Meaning, it could be that your peripherals are still erroring with the older build you are using but it is hiding it.
Get the most out of your XIM NEXUS, read the XIM NEXUS Support FAQ.

Offline DrLupo

  • Member
  • *
  • Posts: 15
    • View Profile
    • Twitch.tv/DrLupo
  • Gamertag: DrLupo
Re: XIM4 Firmware 20151120 (Feedback)
« Reply #215 on: 02:54 PM - 12/23/15 »
Is it possible to do variable sensitivity profiles on Joysticks?

Example: I plug an Xbox One controller into port 2, as well as one in port 3. When ADSing with left trigger, I'd like the right stick sensitivity to drop.

Is this possible?
XIM4 - Razer DeathAdder 3500 - CMStorm Quickfire Pro

DTR - destinytracker.com/destiny/crucible/xbox/DrLupo
GGG - guardian.gg/en/profile/1/drlupo
Twitch - twitch.tv/DrLupo

Offline fung2189

  • Member
  • *
  • Posts: 4
    • View Profile
  • PSN ID: fung2189
Re: XIM4 Firmware 20151120 (Feedback)
« Reply #216 on: 05:15 PM - 12/23/15 »
no controller disconnection message but the xim4 will start to blink in different colors, so i have to re-plug it again to reset the xim4

This is very important -- which colors exactly is it flashing.

20151120 is less tolerant to misbehaving peripherals than prior builds. Meaning, it could be that your peripherals are still erroring with the older build you are using but it is hiding it.

i'll take note of the colors when it happens

Offline Pyro2577

  • Member
  • *
  • Posts: 8
    • View Profile
  • PSN ID: Pyro_oz
Re: XIM4 Firmware 20151120 (Feedback)
« Reply #217 on: 10:18 PM - 12/23/15 »
PS4 rest mode continues to keep it's ports powered for charging devices.

Thanks OBsIV, i was asking because in the previous builds Xim4 would not turn back on and stay off.

Preferred option is to have it stay off.

Offline OBsIV

  • Administrator
  • MVP
  • *
  • Posts: 44153
  • It's obsessive.
    • View Profile
    • OBsIV's Blog
Re: XIM4 Firmware 20151120 (Feedback)
« Reply #218 on: 10:53 PM - 12/23/15 »
Is it possible to do variable sensitivity profiles on Joysticks?

Example: I plug an Xbox One controller into port 2, as well as one in port 3. When ADSing with left trigger, I'd like the right stick sensitivity to drop.

Is this possible?

Unfortunately, that's not an option at this time.
Get the most out of your XIM NEXUS, read the XIM NEXUS Support FAQ.

Offline abc123

  • MVP
  • *
  • Posts: 2958
  • It's as easy as ABC 123
    • View Profile
    • unofficial xim api cloud for configs
  • Gamertag: Dr Donkey Kong
Re: XIM4 Firmware 20151120 (Feedback)
« Reply #219 on: 12:07 PM - 01/01/16 »
my 3.5mm Xbox One controller turns on by itself now...it still vibrates then i don't do anything and it is on

Offline OBsIV

  • Administrator
  • MVP
  • *
  • Posts: 44153
  • It's obsessive.
    • View Profile
    • OBsIV's Blog
Re: XIM4 Firmware 20151120 (Feedback)
« Reply #220 on: 12:28 PM - 01/01/16 »
my 3.5mm Xbox One controller turns on by itself now...it still vibrates then i don't do anything and it is on

Turns off? You mean in the middle of its use?
Get the most out of your XIM NEXUS, read the XIM NEXUS Support FAQ.

Offline mist4fun

  • Global Moderator
  • MVP
  • *
  • Posts: 58839
    • View Profile
Re: XIM4 Firmware 20151120 (Feedback)
« Reply #221 on: 12:37 PM - 01/01/16 »
my 3.5mm Xbox One controller turns on by itself now...it still vibrates then i don't do anything and it is on

This is by design, since 1120 I think?
Have a problem with your XIM? Find a solution
NEXUS Support FAQ | APEX Support FAQ | XIM4 Support FAQ | Instructional Videos

Offline OBsIV

  • Administrator
  • MVP
  • *
  • Posts: 44153
  • It's obsessive.
    • View Profile
    • OBsIV's Blog
Re: XIM4 Firmware 20151120 (Feedback)
« Reply #222 on: 12:39 PM - 01/01/16 »
Oh I'm sorry, I misread that as turns "off". Yes, that was fixed.
Get the most out of your XIM NEXUS, read the XIM NEXUS Support FAQ.

Offline abc123

  • MVP
  • *
  • Posts: 2958
  • It's as easy as ABC 123
    • View Profile
    • unofficial xim api cloud for configs
  • Gamertag: Dr Donkey Kong
Re: XIM4 Firmware 20151120 (Feedback)
« Reply #223 on: 07:24 PM - 01/04/16 »
Oh I'm sorry, I misread that as turns "off". Yes, that was fixed.

awesome! can i recommend that you remove the vibrate?  doesn't really seem worth it to vibrate when no action is needed

Offline infuma

  • Member
  • *
  • Posts: 1
    • View Profile
Re: XIM4 Firmware 20151120 (Feedback)
« Reply #224 on: 09:05 AM - 02/26/16 »
Hi all, I cant seem to find the firmware for 20151120 and the XIM4 manager fot 20151120.


Admin