XIM Community

Turn assist  (Read 16689 times)

Offline cardiac

  • Member
  • *
  • Posts: 90
    • View Profile
Turn assist
« on: 05:23 AM - 06/20/15 »
Hi can some one explain to me carefully.how set up turn assist.as I would like to use it on bf4 iam just not sure what the hell to do a set by step instruction would be great sorry but iam old  and don't quite understand this I have the latest beta using the test flight ios

Offline RML

  • MVP
  • *
  • Posts: 6176
  • Live Different
    • View Profile
Re: Turn assist
« Reply #1 on: 06:33 AM - 06/20/15 »
It would be helpful to know at what point you're struggling. Assuming you know how to setup the XIM4, follow these steps.
  • XIM Manager
  • Choose the setting you wish to add Turn Assist too (Hip,Tank,etc.)
  • Choose Mouse
  • Scroll down to Turn Assist
  • Click on the activation box and assign the button you wish to use to activate TA
  • Choose whether or not to use it as Toggle or Hold (hold is default), Toggle you check the box.
Done.

An Example of how to use it:
I have a G502 mouse and I use the Sony Nav controller. Because I have obviously less buttons at my disposal then someone with a KB, I assign TA to a Button on my mouse. The G502 has a button on top of the mouse right next to left click. I personally find this button perfect for using TA, so that's where I assign it. It's very assessable and makes using TA very simple. I use TA with a HOLD behavior (default). This way I simply move my mouse, then press down the button. I will continue to turn until I release the button with no further mouse movement.

I hope that helps!
ADVANCED SETUPS


Offline cardiac

  • Member
  • *
  • Posts: 90
    • View Profile
Re: Turn assist
« Reply #2 on: 10:50 AM - 06/20/15 »
Many thanks for your reply I have the same mouse.i has set a key to use turn assist.iam sure iam doing something wrong.every time I turn its just spins  the tanks gun then the only way I can stop it is if I click the right mouse button

Offline RML

  • MVP
  • *
  • Posts: 6176
  • Live Different
    • View Profile
Re: Turn assist
« Reply #3 on: 11:37 AM - 06/20/15 »
It sounds like you may have it set to Toggle. Are you using a Sub config for Tank?
ADVANCED SETUPS


Offline cardiac

  • Member
  • *
  • Posts: 90
    • View Profile
Re: Turn assist
« Reply #4 on: 12:01 PM - 06/20/15 »
No idea what a sub configure is sorry

Offline RML

  • MVP
  • *
  • Posts: 6176
  • Live Different
    • View Profile
Re: Turn assist
« Reply #5 on: 02:49 PM - 06/20/15 »
How do you have "Tank" setup? For example do you have a BF4 Profile with Hip, ADS, Tank?

Or

Do you have Two BF4 profiles, one for HIP, ADS and another for Tank?

Or

Are you just using One BF4 profile and using Turn Assist while in the Tank?
ADVANCED SETUPS


Offline cardiac

  • Member
  • *
  • Posts: 90
    • View Profile
Re: Turn assist
« Reply #6 on: 06:27 PM - 06/20/15 »
I am just using one profile  And using turn assist while in the tank

Offline RML

  • MVP
  • *
  • Posts: 6176
  • Live Different
    • View Profile
Re: Turn assist
« Reply #7 on: 09:45 AM - 06/21/15 »
Sry ... been busy,

Ok, so it does sound like you have it set to toggle. Did you try unchecking the toggle option box? See if that resolves the problem.
ADVANCED SETUPS


Offline cardiac

  • Member
  • *
  • Posts: 90
    • View Profile
Re: Turn assist
« Reply #8 on: 12:21 PM - 06/22/15 »
RML will give it a try on Tuesday after work thanks for your help

Offline ViolaMB

  • Member
  • *
  • Posts: 47
    • View Profile
  • Gamertag: ViolaMB
Re: Turn assist
« Reply #9 on: 05:07 PM - 06/22/15 »
Excuse me... Noob question: What is turn assist?  :o  :D is this xim4 related or?
XB1-S | XIM4 | BenQ RL2755HM | Turtle beach EarForce Sentinel | Turtle beach DSS2 | Logitech G502 |


Offline RML

  • MVP
  • *
  • Posts: 6176
  • Live Different
    • View Profile
Re: Turn assist
« Reply #10 on: 03:48 PM - 06/23/15 »
Excuse me... Noob question: What is turn assist?  :o  :D is this xim4 related or?

Turn Assist is a reintroduced feature from the XIM Edge. It allows you to hold turns in any direction with very little mouse movement. You assign TA to a button, if you press the button while moving the mouse you will continue to turn in that direction until you release the button with no further mouse movement. Works great for vehicles such as Tanks. You can also assign it to work in toggle mode.
ADVANCED SETUPS


Offline cardiac

  • Member
  • *
  • Posts: 90
    • View Profile
Re: Turn assist
« Reply #11 on: 01:02 PM - 06/24/15 »
RML Ian still having problems regarding the tanks gun moving by its self and still having to right click mouse to stop it can you send me a screen shot of your xim4 turn assist settings please

Offline RML

  • MVP
  • *
  • Posts: 6176
  • Live Different
    • View Profile
Re: Turn assist
« Reply #12 on: 05:10 PM - 06/24/15 »
I will post a pic later. How are you utilizing Turn Assist, what button?
ADVANCED SETUPS


Offline Harry Potter

  • Member
  • *
  • Posts: 3
    • View Profile
  • PSN ID: Harry Potter
Re: Turn assist
« Reply #13 on: 10:41 AM - 06/25/15 »
RML
i just bought xim4 and i do not have the turn assist feature on my app, how can i get it?

Offline mist4fun

  • Global Moderator
  • MVP
  • *
  • Posts: 52004
    • View Profile
Re: Turn assist
« Reply #14 on: 10:46 AM - 06/25/15 »
Download and install the 606 firmware and Manager that are stickied in this section of the forum.
Have a problem with your XIM APEX? Find a solution in the XIM APEX Support FAQ
XIM APEX Quick Start Guide   |   XIM Instructional Videos