Destiny 2: Advanced “Apex” Setup (01.01.23)

[Griff]

Thank you very much for all the effort you have put into making, maintaining and supporting this config RDL, it's really appreciated.

I am new to the XIM4 and have only been using it for a week. I've found Destiny really easy to adapt to because of your config, it's brilliant. Thanks again!

There's only one issue that I am having now and that is with sprinting and jumping. I am using the Corsair K70 (in Bios mode as suggested in the supported peripherals list). Basically, I can't press jump at the same time as I am holding down shift for run, is this an issue anyone else has? It's just a little frustrating how I have to let go of sprint in order to jump.

[R3MiX]

I never had an issue of sprinting then jumping. Usually while sprinting and then making the jump I naturally let go of sprint anyways so really I can't say I experience your issue.

[flst81]

I'm assuming you have tried assigning a different button for jump that's close to shift that you can use a different finger.  Then you wouldn't have to remove the finger you are using for run.
Me personally, I have run mapped to my kb and jump onto my mouse.

[R3MiX]

I'm assuming you have tried assigning a different button for jump that's close to shift that you can use a different finger.  Then you wouldn't have to remove the finger you are using for run.
Me personally, I have run mapped to my kb and jump onto my mouse.

Same here, run on KB and jump on mouse. Maybe that's where you're having the issue. Try binding run/sprint to another key/button.

[Griff]

I'm assuming you have tried assigning a different button for jump that's close to shift that you can use a different finger.  Then you wouldn't have to remove the finger you are using for run.
Me personally, I have run mapped to my kb and jump onto my mouse.

Same here, run on KB and jump on mouse. Maybe that's where you're having the issue. Try binding run/sprint to another key/button.

Thank you very much R3MiX and flst81. I think this was causing the issue, I'm not entirely sure why having jump on the keyboard did effect this, but oh well! If anyone does find out, please quote this post and let me know!

Now I have to consider buying a new mouse, I am currently using a Zowie FK2, the the scroll wheel does not work with the XIM have got my original MX 518 from 7 years back, may have to try that out!

[Truedarkseed]

My Xim4 does not have some of the settings listed that I see you have.   example: I do not have steady aim listed on mine.  Hoe\w did you get these setting on yours?

[RML]

Thanks for sharing RML may i ask what mouse dpi you are using thanks!

8000 when I created this setup.

Thank you very much for all the effort you have put into making, maintaining and supporting this config RDL, it's really appreciated.

I am new to the XIM4 and have only been using it for a week. I've found Destiny really easy to adapt to because of your config, it's brilliant. Thanks again!

There's only one issue that I am having now and that is with sprinting and jumping. I am using the Corsair K70 (in Bios mode as suggested in the supported peripherals list). Basically, I can't press jump at the same time as I am holding down shift for run, is this an issue anyone else has? It's just a little frustrating how I have to let go of sprint in order to jump.

It sounds like "Jump" is missing from your sprint secondary config. You just need to add it to the button layout, simple as that.

My Xim4 does not have some of the settings listed that I see you have.   example: I do not have steady aim listed on mine.  Hoe\w did you get these setting on yours?

You'll need to upgrade your firmware and manager to the 1120 build found in the link below. Make sure you follow OBsIV's instructions to a T.

Firmware - http://xim4.com/community/index.php?topic=43238.0
Manager - http://xim4.com/community/index.php?topic=43239.0

[R3MiX]

RML do you know of any BC converter from XIME to XIM4 (RC 1120 )? Ive looked around and even tried some converters on the site but they seem to not work. I'm looking for a curve for Halo Reach for the X1.

[RML]

RML do you know of any BC converter from XIME to XIM4 (RC 1120 )? Ive looked around and even tried some converters on the site but they seem to not work. I'm looking for a curve for Halo Reach for the X1.

I Don't, I'm assuming you have a curve in mind, can't you just recreate the curve yourself?

What curve is it?

[R3MiX]

Halo Reach. There was one for it during the XIME days. I wanted to convert that into the latest XIM4 BC coding.

[patchm00]

I'm assuming you have tried assigning a different button for jump that's close to shift that you can use a different finger.  Then you wouldn't have to remove the finger you are using for run.
Me personally, I have run mapped to my kb and jump onto my mouse.

Same here, run on KB and jump on mouse. Maybe that's where you're having the issue. Try binding run/sprint to another key/button.

Thank you very much R3MiX and flst81. I think this was causing the issue, I'm not entirely sure why having jump on the keyboard did effect this, but oh well! If anyone does find out, please quote this post and let me know!

Now I have to consider buying a new mouse, I am currently using a Zowie FK2, the the scroll wheel does not work with the XIM have got my original MX 518 from 7 years back, may have to try that out!

I have both sprint (e)  and jump (spacebar) on my kb with no issues

[Esp10n]

RML you are a beast. Played Destiny till first DLC (got sick of controller). Heard about the XIM4, bought it used your configuration with the Nav + G502 combo. You my friend are a beast. This configuration has made me want to play the game, Thank you!

[R3MiX]

RML do you know of any BC converter from XIME to XIM4 (RC 1120 )? Ive looked around and even tried some converters on the site but they seem to not work. I'm looking for a curve for Halo Reach for the X1.

Which curve are you looking for?

I have no clue how to do that. LOL. Ive always just copied and paste what ya'll post up. I have zero experience in creating one.

Anyways its this one.


>>> XIM Edge Ballistics START Paste >>>
XEBH:01000A141E28323C46505A646E73787D82868A8E9297A00F
XEBA:01000A141E28323C46505A646E73787D82868A8E92978813
<<< XIM Edge Ballistics END Paste   <<<

[walklikeazombie]

Thank you very much for all the effort you have put into making, maintaining and supporting this config RDL, it's really appreciated.

I am new to the XIM4 and have only been using it for a week. I've found Destiny really easy to adapt to because of your config, it's brilliant. Thanks again!

There's only one issue that I am having now and that is with sprinting and jumping. I am using the Corsair K70 (in Bios mode as suggested in the supported peripherals list). Basically, I can't press jump at the same time as I am holding down shift for run, is this an issue anyone else has? It's just a little frustrating how I have to let go of sprint in order to jump.

I'm using the same keyboard. I do not notice this issue. I mainly use RML setup but changed the buttons around.  I'd say it would have to be with your bindings?

[Griff]

Thank you very much for all the effort you have put into making, maintaining and supporting this config RDL, it's really appreciated.

I am new to the XIM4 and have only been using it for a week. I've found Destiny really easy to adapt to because of your config, it's brilliant. Thanks again!

There's only one issue that I am having now and that is with sprinting and jumping. I am using the Corsair K70 (in Bios mode as suggested in the supported peripherals list). Basically, I can't press jump at the same time as I am holding down shift for run, is this an issue anyone else has? It's just a little frustrating how I have to let go of sprint in order to jump.

It sounds like "Jump" is missing from your sprint secondary config. You just need to add it to the button layout, simple as that.

Hey RML and everybody who has been helping...

I was just stupid and missed out the sprint configuration buttons as RML mentioned, thank you very much for all of your help guys. It's much appreciated.

Am absolutely LOVING this config and the XIM in general... Good times

Happy new year everybody!