Destiny 2: Advanced “Apex” Setup (01.01.23)

[RML]

ok i was able to download the firmware and get the manager installed on my phone. I also ended up purchasing the g502 mouse. However, when i click the 3 dots in the manager, i dont see an area where i can paste your conifg.

Are you sure your using the latest firmware and manager, 20150816. If so, after clicking the 3 dots you should open up a drop down and you can then paste the code within the drop down.

[Lord Of The Sith]

ok i was able to download the firmware and get the manager installed on my phone. I also ended up purchasing the g502 mouse. However, when i click the 3 dots in the manager, i dont see an area where i can paste your conifg.

Press the three dots top right in config editing, that will open a drop down section:

In the bottom middle of that "drop down section" there are two symbols, the left middle is a symbol/icon that looks like two squares overlapping each other (this is COPY)

The right middle is a square with an arrow pointing down into it, (this is the one you want PASTE)

[PattyBoy123]

How does it work for the Sprint and Vehicule.. i mean what is the purpose of the turn assist and what it does... if my running setting is set to my shift on my KB, do i have to press anything else to make it work... also i cant bind turn assist anymore dunno why

[s1yr]

Hi, guys! Thanks for an awesome setup! Just thought I would try out the LGS with macros. Do I replace the button mapping from your original post, with the ones found in the link? http://imgur.com/a/VfKnj <- that one

[RML]

How does it work for the Sprint and Vehicule.. i mean what is the purpose of the turn assist and what it does... if my running setting is set to my shift on my KB, do i have to press anything else to make it work... also i cant bind turn assist anymore dunno why

- Turn Assist isn't a Must have for this game, but I personally like using it especially for the sparrow and it does help with tight turns while running.

- If you have your sub config for running setup to activate by pressing shift then that's all you have to do.

Hi, guys! Thanks for an awesome setup! Just thought I would try out the LGS with macros. Do I replace the button mapping from your original post, with the ones found in the link? http://imgur.com/a/VfKnj <- that one

You can either use the same buttons I did in LGS and then assign them in secondary button setup within manager or you can change your buttons in LGS to the Numeric Key pad equivalent. So instead of K1 it would be Kpad1. I'll update the thread again when I get some time. It's hard to keep up with all the updates to this thread, sry. 

[Fatal]

I just wanted to say thank you as well for this. I have a Logitech G700 and was able copy your entire setup in via the first selection (thanks for that!). I then edited the buttons the way I wanted and used your macros as well.
 The game feels much better now playing. Again, thank you!

**Edit to say I am using a PS4 with Razer Anansi Keyboard as well as above mentioned G700.

[thepr0]

RML i need your help bro i have basically same setup just different curves and sensitivity the only issue i have is sprint i have a profile for sprint but sometimes it has a delay when i sprint. I use the sony nav sprint as my activation key for the sprint profile. Can that be the issue? I tried the 200 delay and it still does it not all the time but lets say im sprinting then i jump when i land sometimes i cant sprint for five seconds...

[RML]

I just wanted to say thank you as well for this. I have a Logitech G700 and was able copy your entire setup in via the first selection (thanks for that!). I then edited the buttons the way I wanted and used your macros as well.
 The game feels much better now playing. Again, thank you!

**Edit to say I am using a PS4 with Razer Anansi Keyboard as well as above mentioned G700.

I'm glad it helped you and thanks for your reply, reminds me of why I took the time to post this in the first place. I too had my share of struggles with "Certain" games when joining the XIMNATION.

RML i need your help bro i have basically same setup just different curves and sensitivity the only issue i have is sprint i have a profile for sprint but sometimes it has a delay when i sprint. I use the sony nav sprint as my activation key for the sprint profile. Can that be the issue? I tried the 200 delay and it still does it not all the time but lets say im sprinting then i jump when i land sometimes i cant sprint for five seconds...

Unfortunately I can't help you with that, it's part of the game. If you run for a certain period of time your character will become tired. Here's the kicker, your character can run forever without stopping and show no signs of fatigue. Yet, if you run too long and then stop, your character has to rest for a couple seconds before sprinting again. 

[thepr0]

See i didnt know that im a noob only my 3rd week playing destiny im still learning new things about the game thats good to know

[Blitzkrieg365]

Hi everyone, just got my XIM4 yesterday, great setup RML. The only thing I'd like to ask about is the mouse speed while on the sparrow. It's very slow, meaning turning the screen to look around is slow and makes the sparrow uncontrollable at high speeds. I'm still a noob with XIM configuration so I can't seem to figure out how to increase the mouse speed the proper way. I've tried tweaking the mouse sensitivity under the sparrow section but there's no noticeable changes.

[RML]

Hi everyone, just got my XIM4 yesterday, great setup RML. The only thing I'd like to ask about is the mouse speed while on the sparrow. It's very slow, meaning turning the screen to look around is slow and makes the sparrow uncontrollable at high speeds. I'm still a noob with XIM configuration so I can't seem to figure out how to increase the mouse speed the proper way. I've tried tweaking the mouse sensitivity under the sparrow section but there's no noticeable changes.

Hello Blitzkrieg365, I don't think that Boost is copied when pasting ballistics or others full setups. I use 1000 boost for the Sparrow! First check that your curve matches mine, your sens is similar as well as your DPI (I use 8,000 dpi) then add the boost. If that still doesn't work for you, add more sens or boost or utilize Turn Assist as I do. I can say with 100% certainty that the Sparrow feels great with XIM4 once your settings are proper.

[Brent]

Hi guys, I would love some help please as I would love to use RML's setup with the 20150816 Manager but I have an issue, when I finish installing it and I try to log in with Xim4 Manager all the lights on the Xim4 turn White and stay white and the Xim4 manager program tells me that it is not responding any idea what I may be doing wrong, any idea would be greatly appreciated, cheers and thank you

[thepr0]

This ois probably not the best place to put this i think itll help those who are trying to unlock the Malice rifle and extra mission. Very helpful if you're trying to collect all the Calcified


https://calcified-fragments.herokuapp.com

[RML]

Hi guys, I would love some help please as I would love to use RML's setup with the 20150816 Manager but I have an issue, when I finish installing it and I try to log in with Xim4 Manager all the lights on the Xim4 turn White and stay white and the Xim4 manager program tells me that it is not responding any idea what I may be doing wrong, any idea would be greatly appreciated, cheers and thank you

You should post this in support, you'll get more attention from Devs like OBsIV and mist there. What manager did you upgrade from? It sounds like you may have to make sure the old manager and firmware are completely off whatever your devise is, then download the latest manager after doing a hard reset.

[Grimlock]

Hi there i am new Xim4 owner i love your guide one question howe do i set it up if i have a keyboard. can i still use this if i have not a Nav. ?