XIM Community

Destiny: My Advanced Setup (Updated 11.20.18)  (Read 596414 times)

Offline loo1201

  • Member
  • *
  • Posts: 133
    • View Profile
Re: Destiny: My Advanced Setup (Updated 7/22/17)
« Reply #825 on: 09:52 PM - 09/06/17 »
Sry guys, been really busy last few days haven't had much fun time. In regards to the questions about Sparrow.

I prefer using a macro for Sparrow so that you can Summon, Mount and activate the config with a single button press. But, you don't have to. You can use any button you chose to activate the Sparrow config. However you'll have to Summon, Mount and then activate your Sparrow config while on the Sparrow. Also, make sure you check the Toggle box for your Sparrow config so that you don't have to hold down the activation key while riding it.

As far a dismounting the Sparrow goes, it's really simple guys. Pressing the reload button while on the Sparrow will cause a dismount. So all you have to do is add the reload button to your deactivation keys within the Sparrow config. This will then cause you to dismount and simultaneously deactivate the Sparrow config putting you back in Hip.

You DONOT want to use any other button to dismount the Sparrow unless you also add that button to the deactivation keys. Otherwise you will dismount and still be using the Sparrow config while on foot.

The only buttons that will cause a dismount is Reload and Jump. I prefer to use reload so that I'm not jumping off the Sparrow. So I also change my button layout and remove jump from the Sparrow config so that I can't accidently push it and dismount without deactivating the Sparrow config. I use RC on the mouse to Jump because I'm a NAV user. So for Sparrow instead of assigning A (jump) to RC, I assign Turn Assist to RC which makes riding the Sparrow even easier and more enjoyable IMO.

I've added a Full config Copy/Paste code to the OP. So you can now easily paste my whole setup and modify the button layouts to your liking.

Cheers!   :)

hey! im sorry but this entire post is EXTREMELY confusing. What am i supposed to paste in my cfg? Just the first curve? Or like make a profile for every single curves (sparrow, sprint etc..)?

I want to play D2 with the xim4 but it seems very hard and confusing
3843SR - Settings : EXPO No curve No boost. 100AA 50AAW 0AS 0AE Steady aim OFF

Offline RML

  • MVP
  • *
  • Posts: 5334
  • L1vE DiFfeR3nT
    • View Profile
Re: Destiny: My Advanced Setup (Updated 8/06/17)
« Reply #826 on: 10:04 PM - 09/06/17 »
Advanced Settings can be confusing until you get used to playing around with it. I would suggest you make Two Destiny configs. The one you have now and then create a brand new one from the games library. Then take my whole setup code and paste it into your new Destiny config. This will give you everything I'm currently using, all curves, sub configs, button layouts, etc. Then just rummage through my setup and reassign buttons to your liking.

For info on how to copy/paste an entire setup. Click on the link in my signature to Advanced Settings. Then find the video that walks you through it.
XXX | C:M$ | XIM APEX | Latest | BenQ 24" Monitor | Pad: Steel Series 9HD | Sony Nav | A: Sennheiser 650's/Mod mic/Sound Blaster X7 | M: G502 | D: 12,000 | P: 1000 | AAA Setup [on]

Advanced Settings Info - http://community.xim.tech/index.php?topic=41264.0
Anti Aim Assist curve set for ANY FPS Game -
 http://community.xim.tech/index.php?topic=49063.0
Destiny 1&2 Advanced Settings - https://community.xim.tech/index.php?topic=56658.msg626940#msg626940

Offline RML

  • MVP
  • *
  • Posts: 5334
  • L1vE DiFfeR3nT
    • View Profile
Re: Destiny: My Advanced Setup (Updated 8/06/17)
« Reply #827 on: 10:06 PM - 09/06/17 »
Btw... not everyone enjoys using Advanced Settings. You can play without them and just crank up your sensitivities. It's not as enjoyable IMO, but it can be done. 
XXX | C:M$ | XIM APEX | Latest | BenQ 24" Monitor | Pad: Steel Series 9HD | Sony Nav | A: Sennheiser 650's/Mod mic/Sound Blaster X7 | M: G502 | D: 12,000 | P: 1000 | AAA Setup [on]

Advanced Settings Info - http://community.xim.tech/index.php?topic=41264.0
Anti Aim Assist curve set for ANY FPS Game -
 http://community.xim.tech/index.php?topic=49063.0
Destiny 1&2 Advanced Settings - https://community.xim.tech/index.php?topic=56658.msg626940#msg626940

Offline loo1201

  • Member
  • *
  • Posts: 133
    • View Profile
Re: Destiny: My Advanced Setup (Updated 8/06/17)
« Reply #828 on: 10:13 PM - 09/06/17 »
Btw... not everyone enjoys using Advanced Settings. You can play without them and just crank up your sensitivities. It's not as enjoyable IMO, but it can be done.

So do i just copy/paste the first code you posted? Do i need to make ads, sparrow profiles?
3843SR - Settings : EXPO No curve No boost. 100AA 50AAW 0AS 0AE Steady aim OFF

Offline Deni

  • Member
  • *
  • Posts: 20
    • View Profile
Re: Destiny: My Advanced Setup (Updated 8/06/17)
« Reply #829 on: 12:11 AM - 09/07/17 »
Btw... not everyone enjoys using Advanced Settings. You can play without them and just crank up your sensitivities. It's not as enjoyable IMO, but it can be done.

So do i just copy/paste the first code you posted? Do i need to make ads, sparrow profiles?

Used his setup last night and enjoyed it. Not perfect but way more than enough until an official one comes out, in case that one is better.

You should create a new profile and then add the Hip, ADS and Sprint configurations. Definitely all needed.

Offline thott

  • Member
  • *
  • Posts: 13
    • View Profile
  • PSN ID: endg0r
Re: Destiny: My Advanced Setup (Updated 8/06/17)
« Reply #830 on: 12:53 AM - 09/07/17 »
Thanks for the Sparrow info RML.
I tried your setup last night and most of the things feel nice except for the Sprint turn speed, I can't seem to find a comfortable setting.

When I hold down Sprint (LShift) the sensitivity increases a lot and the movement feels great at this time but when I return to HIP the sensitivity decreases a lot which makes it difficult to aim properly.
Haven't found any nice balance to make the Sprint > HIP transition smoother :(

Offline magmia

  • Member
  • *
  • Posts: 3
    • View Profile
Re: Destiny: My Advanced Setup (Updated 8/06/17)
« Reply #831 on: 02:13 AM - 09/07/17 »
Ty so much :)

Offline magmia

  • Member
  • *
  • Posts: 3
    • View Profile
Re: Destiny: My Advanced Setup (Updated 8/06/17)
« Reply #832 on: 02:15 AM - 09/07/17 »
Thanks for the Sparrow info RML.
I tried your setup last night and most of the things feel nice except for the Sprint turn speed, I can't seem to find a comfortable setting.

When I hold down Sprint (LShift) the sensitivity increases a lot and the movement feels great at this time but when I return to HIP the sensitivity decreases a lot which makes it difficult to aim properly.
Haven't found any nice balance to make the Sprint > HIP transition smoother :(
if you find a nice balance let me know, i've been having similar troubles striking a good balance, so i've taken to just not sprinting in situations ill need to turn heavily

Offline RML

  • MVP
  • *
  • Posts: 5334
  • L1vE DiFfeR3nT
    • View Profile
Re: Destiny: My Advanced Setup (Updated 8/06/17)
« Reply #833 on: 06:48 AM - 09/07/17 »
Thanks for the Sparrow info RML.
I tried your setup last night and most of the things feel nice except for the Sprint turn speed, I can't seem to find a comfortable setting.

When I hold down Sprint (LShift) the sensitivity increases a lot and the movement feels great at this time but when I return to HIP the sensitivity decreases a lot which makes it difficult to aim properly.
Haven't found any nice balance to make the Sprint > HIP transition smoother :(
if you find a nice balance let me know, i've been having similar troubles striking a good balance, so i've taken to just not sprinting in situations ill need to turn heavily

It takes time to get used to. Keep fine tuning your HIP sens as best you can to meet your needs. Of course the Turn speed cap isn't the greatest, but it's do able.

Also, make sure you have 200ms delay for sprint. It helps with the transition to Sprint, less jitter.

I will be working on a new setup over the weekend. I haven't even played D2 yet.
XXX | C:M$ | XIM APEX | Latest | BenQ 24" Monitor | Pad: Steel Series 9HD | Sony Nav | A: Sennheiser 650's/Mod mic/Sound Blaster X7 | M: G502 | D: 12,000 | P: 1000 | AAA Setup [on]

Advanced Settings Info - http://community.xim.tech/index.php?topic=41264.0
Anti Aim Assist curve set for ANY FPS Game -
 http://community.xim.tech/index.php?topic=49063.0
Destiny 1&2 Advanced Settings - https://community.xim.tech/index.php?topic=56658.msg626940#msg626940

Offline Belloci

  • Member
  • *
  • Posts: 44
    • View Profile
Re: Destiny: My Advanced Setup (Updated 8/06/17)
« Reply #834 on: 07:11 AM - 09/07/17 »
Hey guys. I really want to use this config but when i paste it and want to look the config i do not know what keys are in use. What are the keys e.g. j9 (green)? Is that joystick?


Offline RML

  • MVP
  • *
  • Posts: 5334
  • L1vE DiFfeR3nT
    • View Profile
Re: Destiny: My Advanced Setup (Updated 8/06/17)
« Reply #835 on: 08:00 AM - 09/07/17 »
Hey guys. I really want to use this config but when i paste it and want to look the config i do not know what keys are in use. What are the keys e.g. j9 (green)? Is that joystick?

Yes, anything with a J = Joystick. I use the Sony Navigational controller (analog movement) instead of a KB.

BTW .. Welcome to the community!
XXX | C:M$ | XIM APEX | Latest | BenQ 24" Monitor | Pad: Steel Series 9HD | Sony Nav | A: Sennheiser 650's/Mod mic/Sound Blaster X7 | M: G502 | D: 12,000 | P: 1000 | AAA Setup [on]

Advanced Settings Info - http://community.xim.tech/index.php?topic=41264.0
Anti Aim Assist curve set for ANY FPS Game -
 http://community.xim.tech/index.php?topic=49063.0
Destiny 1&2 Advanced Settings - https://community.xim.tech/index.php?topic=56658.msg626940#msg626940

Offline Belloci

  • Member
  • *
  • Posts: 44
    • View Profile
Re: Destiny: My Advanced Setup (Updated 8/06/17)
« Reply #836 on: 09:29 AM - 09/07/17 »
Thx RML!

now I made my config with my own keys. What can I do against being really slow while sprinting? I know u have a sub config and I know how to activate but when I sprint its still really slow...

The other thing: revive! Do I have to create a macro? cause i can not move while reviving ;-)

Thank you!

Offline loo1201

  • Member
  • *
  • Posts: 133
    • View Profile
Re: Destiny: My Advanced Setup (Updated 8/06/17)
« Reply #837 on: 10:42 AM - 09/07/17 »
Btw... not everyone enjoys using Advanced Settings. You can play without them and just crank up your sensitivities. It's not as enjoyable IMO, but it can be done.

So do i just copy/paste the first code you posted? Do i need to make ads, sparrow profiles?

Used his setup last night and enjoyed it. Not perfect but way more than enough until an official one comes out, in case that one is better.

You should create a new profile and then add the Hip, ADS and Sprint configurations. Definitely all needed.

Okay but what about toggle keys for those profiles?
3843SR - Settings : EXPO No curve No boost. 100AA 50AAW 0AS 0AE Steady aim OFF

Offline Torderro

  • Member
  • *
  • Posts: 189
    • View Profile
  • Gamertag: Buxsadme
Re: Destiny: My Advanced Setup (Updated 8/06/17)
« Reply #838 on: 11:39 AM - 09/07/17 »
Dude.. I never played destiny, and I managed to get a few kills/wins in the crucible with this advanced setup. It copy and pasted beautifully and I only had to bind my own buttons.
I honestly can't see how a D2 official st is needed lol D1 works perfectly.



Turn speeds is obviously slow, but if you can get used to it, you can add turn assist to any key you comfortable with.. Then it's REALLY FAST. but it's very hard to get used to something so weird.

While holding down the sprint button, it might be easier to bind the RIGHT STICK to certain keys, or left mouse click and right mouse click..because that turn assist gets really confusing, I think it might be easier if we had buttons to turn left and right.

Thoughts?
Bad sad Christmas.

Offline l Kill3rZ l

  • Member
  • *
  • Posts: 28
    • View Profile
Re: Destiny: My Advanced Setup (Updated 8/06/17)
« Reply #839 on: 10:23 PM - 09/07/17 »
Does this happen to anyone? In D2 wgenever i try to dismantle a weapon it keeps cancelling when i hold down the square button to dismantle (i have square binded to r)