XIM Community

BF4 ADS Update *MUST READ* - Today's Update  (Read 23355 times)

Online mist4fun

  • Global Moderator
  • MVP
  • *
  • Posts: 54589
    • View Profile
BF4 ADS Update *MUST READ* - Today's Update
« on: 10:35 AM - 08/05/14 »
If your BF4 config was created after 8/4/14 then this does not apply to you.

  • The BF4 ADS Smart Translator has been updated on all platforms to support the new ADS knob. You can now
    use max(200%) in game sensitivity after creating a new BF4 config. See below for details.
  • Sniper Elite V3 is now supported on all platforms.
  • The Last of Us Remastered is now supported

To get these new ST's you should be prompted when you open Manager for a download update, this is done automatically. If you don't see this prompt close and reopen Manager.

--
Again, once your download is complete you can now create a new BF4 config that uses the new ST's. Please be aware that your existing BF config will not be updated.Once you have done this you can now use max in game ADS sensitivity of 200%.

Manager allows you to check the version number of your configs hip and ads. To do this, leave Manager open, hold down your ADS button and click on the center image in Manager's HUD. It should read as follows for your given platform. If the numbers don't match up like below then you need to create a new config and delete your old one afterward to avoid confusion.

BF4-ADS-P4.2
BF4-ADS-P3.2
BF4-ADS-X3.2
BF4-ADS-X1.3

note that X1 is one revision ahead of other platforms.

« Last Edit: 09:22 AM - 10/07/14 by mist4fun »
Have a problem with your XIM APEX? Find a solution in the XIM APEX Support FAQ
XIM APEX Quick Start Guide   |   XIM Instructional Videos

Offline Od1n

  • Global Moderator
  • MVP
  • *
  • Posts: 30810
    • View Profile
Re: Today's Update
« Reply #1 on: 10:43 AM - 08/05/14 »
Wohoo

Mist is 200% twice as fast? So divising my current ADS by 2 is fine?
PS4 & X1 | C: MS | XIM4 | FW: the latest ofc! :) | Mon: BenQ XL2420Z | Pad: Zowie G-SR | KB: Ducky DK1008L Cherry Red O-Rings| A: AKG K701 Creative X7 Antlion Modmic | M: Zowie EC1-A | D: 3200 | P: 1000hz | BF4 4 HIP: 35 ADS: 20

My Fortnite Creator Code: beamimpact
Check out my Youtube Channel: XIMGameplay

Online mist4fun

  • Global Moderator
  • MVP
  • *
  • Posts: 54589
    • View Profile
Re: Today's Update
« Reply #2 on: 10:46 AM - 08/05/14 »
I would have to check but it's approximately twice as fast on current gen, less than that on previous gen. It's ridiculously fast on previous gen. I suggest halving your current sensitivity and using it as a starting point. If you want it to be exactly as before do an in game measurement test between two objects at a certain swipe distance.
Have a problem with your XIM APEX? Find a solution in the XIM APEX Support FAQ
XIM APEX Quick Start Guide   |   XIM Instructional Videos

Offline Ark

  • Member
  • *
  • Posts: 62
    • View Profile
Re: Today's Update
« Reply #3 on: 11:26 AM - 08/05/14 »
Nice.

Could some sort of changelog functionality actually be included in the app? For those that don't frequent the forums.

Online mist4fun

  • Global Moderator
  • MVP
  • *
  • Posts: 54589
    • View Profile
Re: Today's Update
« Reply #4 on: 11:29 AM - 08/05/14 »
That's actually coming very soon. :)
Have a problem with your XIM APEX? Find a solution in the XIM APEX Support FAQ
XIM APEX Quick Start Guide   |   XIM Instructional Videos

Offline Od1n

  • Global Moderator
  • MVP
  • *
  • Posts: 30810
    • View Profile
Re: Today's Update
« Reply #5 on: 01:00 PM - 08/05/14 »
Cool thanks for the info mist, ill halfen it and work from that point onwards
PS4 & X1 | C: MS | XIM4 | FW: the latest ofc! :) | Mon: BenQ XL2420Z | Pad: Zowie G-SR | KB: Ducky DK1008L Cherry Red O-Rings| A: AKG K701 Creative X7 Antlion Modmic | M: Zowie EC1-A | D: 3200 | P: 1000hz | BF4 4 HIP: 35 ADS: 20

My Fortnite Creator Code: beamimpact
Check out my Youtube Channel: XIMGameplay

Offline Joey McCamper

  • MVP
  • *
  • Posts: 502
    • View Profile
Re: Today's Update
« Reply #6 on: 01:19 PM - 08/05/14 »
My ADS is 14, so make it 7?

I'm guessing from there I can adjust and tweak as needed.


Offline Ark

  • Member
  • *
  • Posts: 62
    • View Profile
Re: Today's Update
« Reply #7 on: 02:35 PM - 08/05/14 »
Mist, theres a typo in your last of us config.

R3 - "Flasghlight"

;D

Online mist4fun

  • Global Moderator
  • MVP
  • *
  • Posts: 54589
    • View Profile
Re: Today's Update
« Reply #8 on: 03:07 PM - 08/05/14 »
I knew this day would come. I'll fix it in the next update.
Have a problem with your XIM APEX? Find a solution in the XIM APEX Support FAQ
XIM APEX Quick Start Guide   |   XIM Instructional Videos

Offline XIBangBang

  • Member
  • *
  • Posts: 201
    • View Profile
  • Gamertag: XIBangBang
  • PSN ID: XIBangBang
Re: Today's Update
« Reply #9 on: 03:24 PM - 08/05/14 »
Maybe a stupid question, but is the a difference of adding this tuned up to 200% and halving sensitivity? Ie is translation improved?


Online mist4fun

  • Global Moderator
  • MVP
  • *
  • Posts: 54589
    • View Profile
Re: Today's Update
« Reply #10 on: 03:39 PM - 08/05/14 »
If you are using the old ST with max ADS sensitivity you will have acceleration, it won't be 1:1.
Have a problem with your XIM APEX? Find a solution in the XIM APEX Support FAQ
XIM APEX Quick Start Guide   |   XIM Instructional Videos

Offline xSundown

  • MVP
  • *
  • Posts: 535
    • View Profile
Re: Today's Update
« Reply #11 on: 09:34 PM - 08/05/14 »
If you are using the old ST with max ADS sensitivity you will have acceleration, it won't be 1:1.

Max ads in [email protected]% or in Xim4 max ads value?
[email protected]| Noctua D15s| Asus Gene Viii| 16gb DDR4 3200mhz G.Skill Trident RAM| Phanteks Evolv mATX| EVGA 750w G2| 1tb Samsung Evo SSD| EVGA GTX 980ti FTW| Dell U3415W

Offline hold on johnson

  • Member
  • *
  • Posts: 97
    • View Profile
Re: Today's Update
« Reply #12 on: 10:01 PM - 08/05/14 »
I believe my xim4 updated today when I got home from work. Okay after I tried to create new config . . what I get is previous version  of bf4 its .x2 I'm using xbone and my nexus 7 android to configure settings.

Offline jvr2401

  • Member
  • *
  • Posts: 97
    • View Profile
  • Gamertag: Bigmoo31
  • PSN ID: Bigmoo31
Re: Today's Update
« Reply #13 on: 04:28 AM - 08/06/14 »
Just out of curiosity. If i continue to use the old bf4 st but keep the ads at 100% will i experience any negatives?

Cheers

Offline Od1n

  • Global Moderator
  • MVP
  • *
  • Posts: 30810
    • View Profile
Re: Today's Update
« Reply #14 on: 08:10 AM - 08/06/14 »
Just out of curiosity. If i continue to use the old bf4 st but keep the ads at 100% will i experience any negatives?

Cheers

yes the new translator on 200% plays a whole lot better than the old translator @ 100%

about the sensitivity, my sensitivity @ 100% was 25, now its 20 @ 200% if anyone wants a rough idea on the change
PS4 & X1 | C: MS | XIM4 | FW: the latest ofc! :) | Mon: BenQ XL2420Z | Pad: Zowie G-SR | KB: Ducky DK1008L Cherry Red O-Rings| A: AKG K701 Creative X7 Antlion Modmic | M: Zowie EC1-A | D: 3200 | P: 1000hz | BF4 4 HIP: 35 ADS: 20

My Fortnite Creator Code: beamimpact
Check out my Youtube Channel: XIMGameplay