Tut: USB -> DualShock 4 adapter mod (W11cE Device)

[sp0t619]

Whats shield to triangle?

I'm getting my keyboard tomorrow as my g13 gave out on me and I need a mouse so I can't test tonight.. Just as long as the calibration looks good, I should be set..

But as far as connecting it to the ps4, the Xim is connected to the USB host shield accompanied by kb+m.. Now do I connect the ps4 to the ds4 triangle or to the teensy?

[roads]

Calibration is host shield to the small triangle in the DS4, hell the DS4 power adapter.
Connect the XIM then the DS4 to the PS4. You may not need the Teensy powered.

[riggidy]

Plug your Xbox controller into the shield and play.....if it works then the xim will work.

[sp0t619]

Anybody have good mouse ballistics with this mod that's good for BF4 as well?

[roads]

try this

Code: [Select]

>>> XIM Edge Ballistics START Paste >>>
XEBH:0000060C141F27323D485464718193A1B2BFC8C8C8C8F25B
XEBA:0000050D151F2A343E4C5764717F8D9CABBBC8C8C8C8CE30
<<< XIM Edge Ballistics END Paste   <<<

[sp0t619]

Whats your mouse dpi set at Roads? When I paste it, it shows high sensitivity rates. That normal?

[roads]

Yeah 3500 DPI. It’s a G400.

[sp0t619]

I see, I have a Razer deathadder 2013.  It maxes out at 6400 dpi and that's what I have it set at according to the Xim edge instructions that I have to max out the dpi settings of my mouse?

I tried your settings and it's too sensitive for me.. Should I adjust the sensitivity or decrease my dpi?

[roads]

Be careful mice dont really have that high DPI. Mostly its something /9 for example 4500 or 3600. The will interpolate high DPIs. So likely the highest interpolated was 7200 and they reduced it to 6400 as errors were tolerable there.

[sp0t619]

@roads I see, I don't mean to get technical and off topic in this thread. Sorry in advance. but if I was to set my dpi to 3500 like you, would it be the same? Or each mice reacts differently?

I might just exchange my Deathadder for a g700s. The cord of the razer gets in the way sometimes

[sp0t619]

Oh yeah and also, I've been meaning to ask.. When it comes to the Xim, I'm using a wired Xbox 360 controller.. So when I add a config of a game in Xim manager am I supposed to use the Xbox ST respectively? Or use the ps3 ST? Or there's no difference?

[sp0t619]

Are you guys able to power on the ps4 using the Xbox controller home button like in the same fashion as holding down the PS button on the DS4? Or you press the on button on the ps4 console?

[Spicy Noodles]

Impatience finally got the best of me and I decided to try this project out. So it looks like I have a fair bit of reading to do in order to get myself caught up on all the details. It's nice to see that most people manage to get things working in the end despite any problems they run into.

Anyway, since I recognize my own noobiness in messing about with electronic stuff I decided to order enough parts for two, in case I manage to horribly mangle one of the components.

With that said, anyone have experience with the customer service at [email protected]? Good, bad, okay? I ask because I ordered 2 usb host shields but was only shipped 1, and want to know if I should go through the trouble of trying to get them to send the other one or just ignore the issue and buy another one considering they're only $20.

[sp0t619]

They have great customer service.. From my end.

[reticule]

Building this like the XIM 1 will allow me to connect my PS4 to my PC allowing me to use my KB/MOUSE correct ? Before I invest in this I want to make sure that's what it does. Will I need a XIM3/Edge is the question ? I lost one and sold another lol.

Cheers,
Ret