XIM Community

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - geekdll

Pages: 1 2 [3] 4 5 ... 12
31
Beta / Re: Beta Exo
« on: 08:08 PM - 03/13/18 »
This version is working well for me on Fortnite using a G502. Thanks for this update. Things are going in the right direction.

32
XIM APEX Discussions / Re: Fortnite | One button building
« on: 05:49 PM - 03/12/18 »
Oh I got you.

<Dont worry is not my english first language either hehe ;)>

Yeah that's how my macros work.

If I press the BuildStairs macro (let's say is assigned to middle wheel button) what happens is:

game will do the following automatically: open the build mode, go to stairs... selected and macro finish here. From now on... you can:

a) press build button to create a stair, or press and hold build button to keep building more stairs (Turbo Build option must be enabled)...

b) you stay on "stairs selected", meaning if you press back item button (left per example) you can build a floor, if you hold down the build button... it keeps building floors.


To stop building you have to press build button to get back to your primary weapon.

This is kind of semi automatic macro, the only thing that does for you is, enable build mode and select a specific piece, then it depends on you what you want to do.

This semi auto micros give me most flexibility in game. I'm enjoying this way of playing.

33
XIM APEX Discussions / Re: APEX Fortnite setups
« on: 05:46 PM - 03/12/18 »
Does smoothing make the auto aim less effective ? I like it snappy and like AA. should we use 500hz in fortnite or 1000? I kinda like 0 smoothing I like both but I want what's best for the AA lol

Lower your mouse sensitivity and polling rate should increase the in game AA. I would start with lowering your mouse sensitivity in your Apex settings and going for there.

34
XIM APEX Discussions / Re: Fortnite aim assist
« on: 05:43 PM - 03/12/18 »
I was wondering this to. Can you leave your mouse polling at 1000 and turn the apex to 125?

Yes your mouse can always be set to a higher pulling rate then your Apex is set to. But never the other way around.

35
XIM APEX Discussions / Re: Fortnite | One button building
« on: 11:52 PM - 03/11/18 »
So doing some searching on the forums, I have found that for one button building similar to PC requires a device called the Titan One or Titan Two. Before I am willing to drop $100 on the device, I was just wondering if this is correct. I am also curious to know the other functionalities of the Titan Two if someone is knowledgeable enough to share the information. Thanks.

If your mouse has on-board memory and support macros you don't need titan 1 or two. Im using Tt Ventus Z, mouse that supports 12 FULLY programable buttons, even macros that activates if you let a button press down (logitech does not support)

I started to play Fortnite days ago, I noticed the importance of building and I just finish 3 macros for one click build.



IMPORTANT, First change the ingame setting: reset build = ON.

On my Button layout (PS4)

R2 = LMB (Left Mouse Button)
L1 = Left Arrow˛
R1 = Right Arrow
O (build) = E

˛ I use the Razer Orbweaver, Left and Right Arrow are in my thumb so is very easy for me to switch between items.

Fast Building:
Build Wall: press E, then I press LMB, let it down to keep building (ingame setting Turbo Build = ON) no macro needed.

BuildFloor Macro:
Press E(↓30ms / ↑0ms), Right Arrow(↓30ms / ↑0ms), then I press LMB.

BuildStairs Macro:
Press E(↓30ms / ↑0ms), Right Arrow(↓30ms / ↑0ms), Right Arrow(↓30ms / ↑0ms) then I press LMB and keep it down if I need more.

BuildPyramid Macro:
Press E(↓30ms / ↑0ms), Right Arrow(↓30ms / ↑0ms), Right Arrow(↓30ms / ↑0ms), Right Arrow(↓30ms / ↑0ms), then I press LMB.

Now I can build a box with stairs in seconds, like a veteran fortnite player and I have only 12 minutes of play LOL.

These macros are as simple/minimalistic as possible, they need that you manually press R2 to build the first piece and /or press build to exit from build mode if needed... there is a reason.

I did create a Onebutton->BuildOnePiece macro and exit build mode directly, and with theRepeat Macro While Button Press option of my mouse to have instant piece building...

...BUT server lag comes to play and messed up the macro. Longer timings fix it; but is no as efficient o reliable or faster as if you place the first piece manually and exit from build mode when needed.

OK hope it helps.

I just tried your setup with my g503 and its working great nothing else needed. Thanks for sharing.

36
XIM APEX Discussions / Re: Fortnite | One button building
« on: 07:31 PM - 03/11/18 »
I have one button building macros running well on my G903 onboard memory.
My front right thumb button builds a wall and returns to gun and the rear button builds stairs and one of the DPI buttons builds a roof/floor.

I just did them via Logitech's software, recording the delay between keypresses (won't work without the delays) while pressing them in sequence as quick as you can.

BTW, the right thumb buttons and others need to be bound to a keyboard key before the Apex recognizes them, for me at least.

Here is a screencap of my stairs macro in the Logitech software.
It's very easy to do.



So what key do you have your mouses left click set to? That would excute the build of stairs in your screen shot.

37
No logitech mice or keyboard macros will work.

The problem is most mouse software requires you to be plugged into a pc however I did find a mouse that works.

Look up bloody mouse in Google.

You can create all sorts of things... Rapid fire.... Anti recoil etc
The only. Issue is the sensors are below par.... Not very good

So could macros be setup on a logitech mouse for quick one button building in fortnite?

38
XIM APEX Discussions / Re: Fortnite | One button building
« on: 03:47 AM - 03/11/18 »
Haven't created any macros for Fortnite, but I use a mouse with extra programmable buttons like the Swiftpoint Z rather than stacking multiple m/kb converters like XIM and other devices.  Less latency and problems that way.

I assume my logitec G502 can same macros on memory but I am not sure if that would work

39
XIM APEX Discussions / Re: Fortnite | One button building
« on: 03:43 AM - 03/11/18 »
Probably won't do a video, but I'll make a walk-through with screenshots and pics. Not too experienced with video honestly

That would be great let me know once you do

40
XIM APEX Discussions / Re: Fortnite | One button building
« on: 03:17 AM - 03/11/18 »
That part I'm not too sure about, but I'm sure someone will have a more definitive answer for you :)

So you have a T2 working with a Apex using a Logetic G502 mouse with single key building mapped to some of your mouse buttons or are they binded to your keyboard?

Mouse buttons

You planning on making a video on how to set this all up?

41
XIM APEX Discussions / Re: Fortnite | One button building
« on: 02:57 AM - 03/11/18 »
That part I'm not too sure about, but I'm sure someone will have a more definitive answer for you :)

So you have a T2 working with a Apex using a Logetic G502 mouse with single key building mapped to some of your mouse buttons or are they binded to your keyboard?

42
XIM APEX Discussions / Re: Fortnite | One button building
« on: 02:13 AM - 03/11/18 »
I just received my APEX in the mail a couple days ago, and before that I was using the Titan Two exclusively to play Fortnite BR on PS4 for about a week since my transition from PC. The script I'm using allows me to map one-button building to my G502 perfectly the way I do on PC. I've just set up my APEX and T2 to work together tonight and I must say, it's a game changer. The Titan Two works perfectly well stand-alone for Fortnite, however the mouse input translator is FAR inferior to the APEX.

If you're looking to get a Titan Two for one-button building, definitely give it a shot. I can give you the script that I'm currently using as well. I hope this helps answer your question. Best of luck!


Thanks for the help! I am definitely looking into getting the product now as I'm used to Fortnite on PC, but my friends play on console. The script would also be great to have, thanks!

Exactly why I purchased the T2, then eventually the APEX! My friends are all on PS4, and thought there's cross-play - they constantly had frustrations playing in lobbies with nothing but m+kb players in PC lobbies. I suck with a controller so once I found that script on the T2 forums, I was sold. Glad I can help!
Do you have a youtube video or something where i can see how is done.( titan 2 with apex for fortnite)

I don't have a video, but I can make one or walk you through how to set it up. I've done all the hard work already, so it'll be easy for anyone else :) just let me know what you prefer

That would be great for the community. Do you have a link to where you got the script?

Am I allowed to post links to other products forums on this page? I don't want to step on any toes. If so, I'll gladly post a link!

Im not sure I just sent you a PM

43
XIM APEX Discussions / Re: Fortnite | One button building
« on: 01:57 AM - 03/11/18 »
I just received my APEX in the mail a couple days ago, and before that I was using the Titan Two exclusively to play Fortnite BR on PS4 for about a week since my transition from PC. The script I'm using allows me to map one-button building to my G502 perfectly the way I do on PC. I've just set up my APEX and T2 to work together tonight and I must say, it's a game changer. The Titan Two works perfectly well stand-alone for Fortnite, however the mouse input translator is FAR inferior to the APEX.

If you're looking to get a Titan Two for one-button building, definitely give it a shot. I can give you the script that I'm currently using as well. I hope this helps answer your question. Best of luck!


Thanks for the help! I am definitely looking into getting the product now as I'm used to Fortnite on PC, but my friends play on console. The script would also be great to have, thanks!

Exactly why I purchased the T2, then eventually the APEX! My friends are all on PS4, and thought there's cross-play - they constantly had frustrations playing in lobbies with nothing but m+kb players in PC lobbies. I suck with a controller so once I found that script on the T2 forums, I was sold. Glad I can help!
Do you have a youtube video or something where i can see how is done.( titan 2 with apex for fortnite)

I don't have a video, but I can make one or walk you through how to set it up. I've done all the hard work already, so it'll be easy for anyone else :) just let me know what you prefer

That would be great for the community. Do you have a link to where you got the script?

44
On keyboard it would be Q and E on mouse it would be the extra forward back buttons.

45
I wouldn't worry the PubG devs doing anything soon or if ever when their game is not even optimized to run on console yet.

Pages: 1 2 [3] 4 5 ... 12