XIM Community

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - RML

Pages: 1 [2] 3 4 ... 418
Game Support / Re: PUBG: Advanced Setup (Updated 20200627)
« on: 01:11 PM - 07/01/20 »
Thanks RML, I really love these settings ... One problem I am having is this ...

I copy and pasted your code and it worked perfect into the xim manager on my smartphone .. then since I use keyboard , I changed my activation button to the desired buttons ie. Space bar for jump ...

I changed OTS to my own activation button and disabled that button in the OTS aux. I did the same thing for ADS and Long range ...

The problem is now when I ADS it doesn't work.. it will ADS for a second and then go back down even though I am holding my right mouse button to ADS (I use right mouse click to ADS in my hip settings)

The same thing happens for OTS. I use a button on my mouse to OTS aim ..so I use that button for activation in the OTS aux , then I disabled that button in that aux ... Same result, it will OTS for a second then go back down ..

I also am not sure if holding my Space bar down for 224 milliseconds is actually activating thehe long range settings

Any ideas?

Hey johnsmith1999,

If you copy/paste your entire config I will take a look at it and see whatís up.

Shared Configs / Re: MW Advanced Setup (20200613)
« on: 05:33 AM - 07/01/20 »
You are absolutely right RML I have come to realize the best polling rates for BR mode are 500hz and 250hz on the xim. 250hz is best experience on Sync Off. 500 works better with Default and Common. 500hz on Sync off is still somewhat sketchy ďstutteryĒ.  I have completely removed Smoothing because all it really does is give me a darn headache with the floatiness. I must admit though the curves that Gunner uses 3.1 and 4.1 work really well in Warzone. 500hz Xim works Best in MP on Sync OFF.

I donít doubt this a bit. To this day I havenít played more then a dozen or so matches in Warzone as I keep going back to PUBG for the BR experience, I also hate changing HZ around for different games and game types. Iíve tried 250 and it feels good but makes AA too much to handle for me personally in a lot of games.

Game Support / Re: Destiny 1&2: Advanced Setups (20200613)
« on: 03:33 PM - 06/30/20 »
im using this setup on PC but i have a problem. I cannot use ghost button (touchpad) on pc. How can i fix it? Or doy you have any good pc settings?

I don't play on PC with XIM and I'm on Xbox, sorry.

Game Support / Re: PUBG: Advanced Setup (Updated 20200627)
« on: 02:50 PM - 06/30/20 »
What does the .5 of steady aim you added do?

You tell me... Lol.

To be honest, I haven't truly put my finger on it. What I'm experiencing though is movement actually feels a little more precise. Seems odd, based on what Steady Aim is. But this game has a truly odd look mech. so who knows. All I can say is, my movement seems to be slightly more responsive with it added. Normally though I would only use SA with games that have Aim Assist.

Great question though, SA isn't something I would've thought would work well with a game that has no AA. This is part of the reason why I never tried it before now, it really didn't make a lot of sense.

Shared Configs / Re: MW Advanced Setup (20200613)
« on: 02:43 PM - 06/30/20 »

With those kind of smoothing values I wonder if you would notice a difference using 1000hz on xim. Most likely you wouldnít notice any mouse stutter.

You may be able to completely remove smoothing @ 500hz. I didn't try that after adding Steady Aim. @ 1000hz. I would leave the smoothing though.

This setup is LOVE! Im
assuming itís good for warzone as well.

Hi, am new to XIM but I have been following your threadS. When you post update OP. What does that mean? Do you have your most updated  configuration for Multiplayer. Thank you!!!
Hey, this just means the original post on page 1 has been updated with the latest ST.

RML thx! Great work mate, this is smooth and snappy and no probs with AA :)

Appreciate the feedback guys.

hello, thanks for the config.
I cant seems to be able to paste it with FW: 5.00.20200307

I'm using that firmware which is found here - https://community.xim.tech/index.php?topic=85503.0

Rml how do you setup a leypad aswell as using the nav stick ?

I plug it in instead of a KB and then setup button bindings under secondary. The Key pad I use also has macros which is nice!

Man, I got pretty far behind on this thread.


Game Support / Re: PUBG: Advanced Setup (Updated 20200627)
« on: 11:13 AM - 06/27/20 »

Hey man,

The STís are created without Aim Assist as theyíre built without enemies present. So an ST with AA turned off would be exactly the same. If you want to try an RML style approach, which is use aim assist to your advantage but limit it. Then try this setup below. Iíve modified a lot of Xim advanced settings to combat AA and make it feel close to PC.

Iím using 12,000 dpi 1000hz mouse and 500hz Xim, Sync is OFF.
Code: [Select]

I USE A NAV SO MAKE SURE YOU CHANGE YOUR ADS ACTIVATION KEY. Iíve also added a long range sub and a commo rose sub, you can disable them if you donít like that stuff.


Game Support / Re: Destiny 1&2: Advanced Setups (20200613)
« on: 09:21 AM - 06/26/20 »
I donot have any traction boots yet. With the new update I may be playing more soon. But this setup is without traction boots.


Game Support / Re: Did Modern Warfare get an aim update?
« on: 08:01 PM - 06/13/20 »
Feels fine to me...

Shared Configs / Re: MW Advanced Setup (20200613)
« on: 08:00 PM - 06/13/20 »

Game Support / Re: Destiny 1&2: Advanced Setups (20200613)
« on: 01:58 PM - 06/13/20 »
Alrighty Then!

Destiny 2 has been updated with my craziest, most whack job setup yet. Built with pure Awesome suaveí (not sauce) ďSuave!Ē Pure and simple, This setup rocks ladies and gentlemen!

This setup was built in PvE so its really simple peeps, if youíre over aiming in PvP... THEN TURN YOUR SENSITIVITY DOWN UNTIL YOUíRE NOT!

(Destiny update coming soon)

EDIT: Destiny Updated!


Is BO4 just it's own animal? Cause I 100% experience more AA the higher I go with my DPI. I use a G305.

I'm a mid-sens player. 1000hz and sync off. I played on 800 DPI for quite a while. No curves, no boost, no steady aim, in fact I had to add smoothing just to get enough aim assist otherwise there was very little.

I recently switched to 12,000 DPI, cause I started to not like the way 800 feels, particularly on higher ping lobbies it just felt sluggish at times. The aim assist you get with 12,000 is RIDICULOUS. When I sensitivity-matched via a DPI calculator and left everything else the way it was, it was basically unplayable, the aim assist on the ADS was that strong.

On my ADS settings I lowered smoothing a lot to 2. Changed curve to RML AAA #6. 6 steady aim. 1000 boost then flattened out the first 4% of the curve a bit to counteract the increase in micromovements. Only THEN did the AA start to feel nice and workable. I didn't have to do any of this with 800 DPI, even with no AAA measures the AA is very workable with a medium sensitivity. It's worth it to be able to play on 12,000 DPI though cause it feels good, particularly on HIP where my movement feels nice and responsive and makes me feel comfortable and confident as I move around the map.

Hope it's okay to bump this old thread btw, and I appreciate the effort you've put into it and your curves and configs  8)

That's odd, maybe it's the mouse. I'm glad you found a compromise though. Also, don't worry about the bump. This is one of those threads, that IMO needs a bump for newer users on occasion. It's also due for an update which I will be doing very soon.

Hey RML,

Just came here to say I appreciate all the work you do man. Consistently giving the community in depth information and giving everyone the tools necessary to really customize this device to their personal preference. It's unfortunate so many people just want a one setting fits all, but if they would just use other settings as a baseline then follow the plethora of information you've given us, we'd all find what our heart desires lol. You're awesome, ty as always.

Appreciate you man. The reason I've always done this is because it wasn't something the community really offered when I 1st got here. It took alooong time to get OBsIV to buy into offering up all of these Advanced Settings "Tools" that we have now. Fine tuning XIM Apex is half the Joy that I get out of the product and it's all these Advanced Settings that really sets it apart from XIM4. Apex truly was created for the "Hardcore" users.


Game Support / Re: Destiny 1&2: Advanced Setups (20190801)
« on: 08:51 AM - 06/12/20 »

Honestly, if this setup has room for improvement itís with Hip and Sprint. I forgot all about that previous curve. I rarely play the game anymore, I usually just play it when I want to try and improve the gameplay, itís a challenge. I would definitely change the ADS curve though, go with my new one or most recent one. I still need to update the OP here at some point as itís nothing even close to whatís being used currently.

I'll update this over the weekend. Not sure about the DZ thing, I'll look into it.


Any way you could put what you currently use (or latest considering you don't play this much anymore)?

I also noticed for some reason when I used your code it put my deadzone at like 7500? Is this normal?

Game Support / Re: PUBG: Advanced Setup (Updated 20200531)
« on: 03:40 PM - 06/09/20 »
RML are you able to load when the long range config is active? Not sure if I did something wrong but I couldn't lean.

Ha, just noticed this. I guess I never lean while using LR. All you have to do is assign the same lean buttons from ADS though.

Good to hear from you R3MiX, take care man.

Game Support / Re: PUBG: Advanced Setup (Updated 20200531)
« on: 04:33 AM - 05/31/20 »
size=18pt]UPDATED 200531 - LATEST[/size]

Whatís new?
- Another brand new curve for Hip, Ads and OTS. (Hip is slightly different then ADS and OTS). These curves are my best yet IMO, theyíve really helped with over aiming and greatly improved tracking.
- Raised Hip Sensitivity to 30
- Raised ADS Sensitivity to 21
- Raised OTS Sensitivity to 21

Hereís the HIP curve:
Code: [Select]
>>> XIM APEX [Translate Ballistics] START COPY >>>

ADS and OTS curve:
Code: [Select]
>>> XIM APEX [Translate Ballistics] START COPY >>>


Pages: 1 [2] 3 4 ... 418