Messages

31

Beta / Re: XIM APEX BETA [Firmware 20190603] [Manager 20190601] (**LATEST**)

« on: 06:14 AM - 06/12/19 »

I switched recently from Sony Nav to Keyboard, and I play fortnite!

This means I had to enable sab (I use an ADS profile, and I have 200 SAB there, found this setting in the shared config)

What I noticed right away, is that I'm struggling to shoot 1 bullet per click.

What I mean is, when I use a rifle, sometimes I dont spam or hold the Fire button, but I precisely shoot one bullet at a time.

Now if I press my Fire button, 50% of the time, it will shoot twice, even if I pressed the Fire button once!

I'm not sure what the cause is, but this is happening since a week ago, and there were 2 major changes:

-sony nav to keyboard (and activated SAB on ADS)
-changed mouse from g502 spectrum to the new wireless g502 lightspeed

any clue what this could be?

Here we go again, add another user thats having similar issues to the list... do you really think 10 ppl complaining about the same thing isn’t convincing enough..? Ill do the click test when i get back from work, but in the mean time do you think it could be a hardware compatibility problem with the g502 wireless version? Maybe not everyone is having this issue due to their setups, but Me, and as well as other users have the same mouse, so that could be the problem, or something else got changed in the firmware thats causing it to act that way. However, firmware 320 i did not see the same issue as 603 had with the clicks... so this is tricky to comprehend atm..

32

Beta / Re: XIM APEX BETA [Firmware 20190603] [Manager 20190601] (**LATEST**)

« on: 12:50 PM - 06/11/19 »

Yo. I also created a post that the 1 click - 1 fire weapon stops when you fast click the mouse button. Test in Blackout.  I have and tried on logitech g502 wirelles, logitech g903, steelseries 600

I can reduce the SAB trigger latency, but, it's already really close to our retail build values.

Idk what you gotta do but this is game breaking, you will get outgunned by someone whose decent in any gun fight where you have any semi-auto gun, it just shoots too slow, it doesn't register the 2nd and 3rd clicks, and every shot counts in blackout/ othe games

33

Beta / Re: XIM APEX BETA [Firmware 20190603] [Manager 20190601] (**LATEST**)

« on: 11:58 PM - 06/10/19 »

Someone test the semi automatic but on blackout currently and report back, gun will stop firing even after clicking several times

Same issue when firing with m16 in  Pubg

There it is, more than one user experiencing the same issue, and someone else pointed it out in another post in a diff section, its like the issue only happens with burst/semi fire weapons only when trying to rapidly tap the fire button on the player as your tracking him... please admins look into this issue, i wont upgrade my firmware from 320 until this issue gets resolved...

34

Beta / Re: XIM APEX BETA [Firmware 20190603] [Manager 20190601] (**LATEST**)

« on: 10:31 PM - 06/09/19 »

Someone test the semi automatic but on blackout currently and report back, gun will stop firing even after clicking several times

No issues here. Maybe your mouse is dirty and needs cleaning?

Nope 100% not the mouse its a brand new g502 wireless works fine on other firmwares like 315,320 for example, but since 601/603 the issue has rised

35

Beta / Re: XIM APEX BETA [Firmware 20190603] [Manager 20190601] (**LATEST**)

« on: 09:02 PM - 06/09/19 »

Someone test the semi automatic but on blackout currently and report back, gun will stop firing even after clicking several times

36

XIM APEX Discussions / Re: Logitech G502 wireless....

« on: 06:36 AM - 06/09/19 »

Best transition ive made its just better in every way,  ditch the cord

37

Game Support / Re: Cod bo4 single fire button and bad reaction

« on: 09:36 PM - 06/08/19 »

Nope everyones hiding it seems like, and apparently no ones having this issue or just flat out never tested it out. I even Pm’d osbiv 2x times and still no response..

38

Game Support / Re: Cod bo4 single fire button and bad reaction

« on: 08:50 AM - 06/08/19 »

^ this is exactly what i was talking about from 601 firmware where it all started, any semi automatic gun you use it will happen with, espically. When the AA bubble kicks in, it will stop your mouse from shooting at max speed when you try to rapidly tap the fire button while trying to aim at an enemy close-mid range.

39

Game Support / Re: BO4: Advanced Setup (20181216)

« on: 05:15 PM - 06/07/19 »

I've been MIA dealing with alot of stuff, things are looking up though. I'll probably be back at this soon and I will update this in the near future.

Cheers!

Really looking forward to a updated blackout config RML!! We need you back   

40

Beta / Re: XIM APEX BETA [Firmware 20190601] [Manager 20190601] (**LATEST**)

« on: 01:48 AM - 06/04/19 »

So I tested this beta everything seems fine besides a situation that occurred when i was playing blackout and I would be using any semi automatic gun/ or burst and it would stop shooting after im still spam clicking the fire button?? This has never happened on the older beta versions, u would be able to burst super fast, now there’s a “stuck” /stop animation that doesn’t allow you to shoot as fast.

The guns I used were ABr/ daemon/ auger/ sdm, all had the same issue when you tried to burst tap fast, osbVi can you look into this?

41

Beta / Re: XIM APEX BETA [Firmware 20181109] [Manager 20181109]

« on: 04:46 AM - 05/29/19 »

Does this beta still work? I remember this was the best firmware I've used.

X2 can’t find the manager, someone needs to do a link

42

General Discussion / Re: ADS 0.75 in Black Ops 4= Aimbot

« on: 02:37 PM - 05/28/19 »

Still curious about the hips translator on the ads setting.

It was more by accident than design. I set ADS to use the HIP ST as an experiment to see if it helped with AA and hitbox entry. A month later I had forgotten about it, so I set ADS to use the ADS ST and it felt like dookie.

Using HIP for both ADS and HIP also eliminates the need for ADS Delay.

So now do you have your ads delay set to 0, with SAT ticked on or off? Mainly referring to blackout

43

General Discussion / Re: ADS 0.75 in Black Ops 4= Aimbot

« on: 10:22 PM - 05/24/19 »

Does all of this work for blackout? Someone confirm this

—————————————————————————-

Confirmed this these past few days tweaking it works for blackout!! .75 with a pinch of Steady aim (about 1.5) works wonders, the auto aim is insane for mid-long ranges with virtually any gun, helps you stay on target much more than 1x, congrats guys best tweak to my settings was the .75 and a tad bit of steady aim, used this with no boost cuz it didn’t really need it, but will be tweaking this config for blackout to perfect it. 

44

Beta / Re: FEEDBACK: Simulate Analog Behavior values you use

« on: 01:36 AM - 05/23/19 »

Regarding SAB

As you may know using SAB on HIP in most games break's the movement of strafing left and right. So i came with a work around to fix this!

This requires 3 Auxiliary profiles.

First One is for W.

W - This Sub Auxiliary profile should have the same exact setup as your HIP profile, but with inherit unchecked and nothing but SAB added.

A - This Sub Auxiliary profile should have the same exact setup as your HIP profile, but with inherit checked.

D - This Sub Auxiliary profile should have the same exact setup as your HIP profile, but with inherit checked.

Doing this should Allows W to have SAB movement without breaking the movement mechanic.

Another thing i came across.

If the user wants to use A,D with SAB

you need to do this;

Add SAB to the ADS TAB.


A - This Sub Auxiliary profile should have the same exact setup as your HIP profile, but with inherit unchecked, but uses the ADS translator.

D - This Sub Auxiliary profile should have the same exact setup as your HIP profile, but with inherit unchecked, but uses the ADS translator.

^ using this would require a adjustment to the sensitivities.

I will make a video tutorial, I do not know when it will be up tho.

Can someone screenshot a picture of how to set this up? Kinda confused

45

XIM APEX Discussions / Re: General Advice Rant (from BO4 AA question off Reddit)

« on: 06:22 AM - 05/20/19 »

Anybody got good config/settings for blackout currently?? Really struggling mid-long range accuracy. Used to beam ppl few patches ago now it’s all lurch’s tbh. Best sync imo is off for this game just need consistent setting