XIM Community

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Xdrqgol

Pages: 1 ... 5 6 [7] 8 9 10
91
Game Support / Re: EPIC vs XIM 1-0
« on: 11:44 AM - 09/01/18 »
You said you play with aim assist always off.... multiple times you have "barked" this.

Yet you say you feel no AA in that post above.

Well?

Yes, i play with it off, when playing on PC! I do bark a lot acutally , cause I know my sh**%#t!
If you need something😊, and you think you are capable of keeping the discussion up to a certain level, ok, prove it! Otherwise, please @#$%!




92
Game Support / EPIC vs XIM 1-0
« on: 10:45 AM - 09/01/18 »
Alright, so I played on both PC  and on Console using XIM....

RANT INCOMING >:(!

After the last updated I can really say that they did change something to affect XIM. Why I am saying this, well , after playing on PC with and without XIM, on Console with and without XIM found the following while using XIM:

- inconsistency
- no AA
- AIM is broken at times (when you actually need it(during fights) it fails miserably)

While any of the above are NOT happening while using the controller... so, I have seen a lot of threads and the recomandations from the ADMINS are to :

- update your XIM APEX
- update your game config in XIM APEX
- create a new GAME config in XIM APEX

While all the above and every aspect has been cleared, I have moved forward and look through my mouse coniguration:

- pooling rates
- DPI

Check every video about XIM APEX and followed the guide closely to find my own setup!

After doing all the above, played for the last 20hours:

-  the inconsistency is still present
-  the issues are still present

It doesn't feel good to me compared to post update XIM APEX experience.

Not sure what they did, (they SAID they will do something agains XIM apex) , but it seems it works and we can just sit back and wait for (not sure what cause the ADMINS here didn't notice or play this game) something or move and play a different game.

Anyway, at the beginning I was thinking maybe it is just me...but with all the tweaks, all the smoothing all etc.. I did improve the feeling but never close to feel realiable on my xim , where with the controller I can dare to go 1 vs 1 with any XIM user here knowing I will end up being the one alive...NOT the same I can say about XIM anymore.

Anyway, I am a bit pissed (yeah) after the past 20h of trying to understand what is wrong. Check mouse pooling rate with the guide that was available here. Than even changed the mouse to a new one (logitech G502, even tried a Steelseries Rival 600 just to make sure that the issues is not from the mouse I am using ).

NOTHING makes this update feel any better, it is still shi**&&&T.

Sorry for the RANT!

93
Game Support / Re: Problem with new Fortnite ST
« on: 05:00 PM - 08/29/18 »
@mist.

What settings do you use for fortnite. Dpi pol synch etc...
I would like to try out your settings since your the one fixing these problems

Iíve been playing fortnite on apex since the release of apex. Itís the only game I play. I play every single god @#$% day

what console do you play?

I use on my XB1 X
 
12k DPi Logitech G502
pool 1000Hz
Default sync
Nothing else changed.

if it helps..

94
Game Support / Re: Problem with new Fortnite ST
« on: 04:06 PM - 08/29/18 »
First, i would like to say that I have found something and would like to appologies before posting here, as I think I have not been clearly made myself understood.

With this being said, would like to continue this conversation in private until we find a resolution.

@mist4fun could we continue a conversation in private please?


95
Game Support / Re: Problem with new Fortnite ST
« on: 03:08 PM - 08/29/18 »
The way XIM works is if there are any timing issues whatsoever (including the type of issues you are referring to here) then your XIM will flash purple to let you know.

Are you running your XIM at 1000Hz?

Yes sir, I am running it at 1000Hz, always did...just after this update things are not feeling the same...seems all micro movements are not registered, seems that it fails to register in those moments. Tried using and playing with the controler and there are no such issues...

Really appreciate everyone's support, hopefully we will nail this down and fix it. If I can help with anything else, please do let me know.

96
Game Support / Re: Problem with new Fortnite ST
« on: 03:06 PM - 08/29/18 »
The 1:1 movement isn't working well for me in the new st with the acceleration changes in the patch. I've just adjusted xim settings and stuck to the old st. Might be effecting high sensitivity players more I don't know.

Fortnite has timed acceleration throughout the look mechanic.


Xdrqgol, do you have a headset attached to your controller when this happens? If so try playing for a session without a headset ever attached to the controller.

@mist4fun, no, I do NOT have any headset attached. never did...

97
Game Support / Re: Problem with new Fortnite ST
« on: 11:02 AM - 08/29/18 »
100% everytime during gameplay not neceserry when aiming at a target. Acutaly not sure how to read the log but the screen was not moving while I was doing micro movement (both hip and ads)

98
Game Support / Re: Problem with new Fortnite ST
« on: 10:36 AM - 08/29/18 »
@mist4fun here you go


[01464] Q[0] E[0] M[0] | S[0] C[0] T[0] I[0] R[ 127, 164,8000] U[50] [12] *^
[01465] Q[0] E[0] M[0] | S[0] C[0] T[0] I[0] R[ 127, 164,8000] U[50] [06] *^
[01466] Q[0] E[0] M[0] | S[0] C[0] T[0] I[0] R[ 143, 262,8000] U[50] [11] *^
          HR[04] HT[04] DV[00] TR[01] BT[00] TW[00] UI[00] EN[00]
   T1[110] | [ 84][110][ 71][ 83][ 95][109][ 82][ 85] | [  3] [C-K-MK]
     X1[ 91] X1[ 77] GK[ 65] GM[ 88] GK[ 64] GK[ 67]
[01467] Q[0] E[0] M[0] | S[0] C[0] T[0] I[0] R[ 226, 276,8000] U[50] [14] *^
[01468] Q[0] E[0] M[0] | S[0] C[0] T[0] I[0] R[ 235, 279,8000] U[50] [13] *^
[01469] Q[0] E[0] M[0] | S[0] C[0] T[0] I[0] R[ 239, 276,8000] U[50] [08] *^
[01470] Q[0] E[0] M[0] | S[0] C[0] T[0] I[0] R[ 246, 279,8000] U[50] [13] *^
[01471] Q[0] E[0] M[0] | S[0] C[0] T[0] I[0] R[ 240, 282,8000] U[50] [14] *^
          HR[04] HT[04] DV[00] TR[02] BT[00] TW[00] UI[00] EN[00]
   T1[121] | [ 86][121][ 74][ 87][ 86][118][ 87][102] | [  4] [C-K-MK]
     X1[ 97] X1[ 69] GK[ 68] GM[ 97] GK[ 68] GK[ 76]
[01472] Q[0] E[0] M[0] | S[0] C[0] T[0] I[0] R[ 241, 292,8000] U[50] [14] *^
[01473] Q[0] E[0] M[0] | S[0] C[0] T[0] I[0] R[ 243, 280,8000] U[50] [08] *^
[01474] Q[0] E[0] M[0] | S[0] C[0] T[0] I[0] R[ 247, 279,8000] U[50] [13] *^
[01475] Q[0] E[0] M[0] | S[0] C[0] T[0] I[0] R[ 240, 277,8000] U[50] [14] *^
[01476] Q[0] E[0] M[0] | S[0] C[0] T[0] I[0] R[ 240, 277,8000] U[50] [13] *^
          HR[03] HT[04] DV[00] TR[02] BT[00] TW[00] UI[00] EN[00]
   T5[120] | [ 86][115][ 74][ 86][ 86][120][ 86][ 87] | [  3] [C-K-MK]
     X1[ 99] X1[ 69] GK[ 67] GM[ 95] GK[ 68] GK[ 68]
[01477] Q[0] E[0] M[0] | S[0] C[0] T[0] I[0] R[ 237, 281,8000] U[50] [08] *^
[01478] Q[0] E[0] M[0] | S[0] C[0] T[0] I[0] R[ 235, 269,8000] U[50] [13] *^
[01479] Q[0] E[0] M[0] | S[0] C[0] T[0] I[0] R[ 234, 275,8000] U[50] [14] *^
[01480] Q[0] E[0] M[0] | S[0] C[0] T[0] I[0] R[ 223, 288,8000] U[50] [13] *^
[01481] Q[0] E[0] M[0] | S[0] C[0] T[0] I[0] R[ 243, 284,8000] U[49] [09] *^
          HR[04] HT[03] DV[00] TR[02] BT[00] TW[00] UI[00] EN[00]
   T5[119] | [ 86][115][ 73][ 93][ 87][119][100][ 96] | [  3] [C-K-MK]
     X1[ 97] X1[ 69] GK[ 75] GM[ 93] GK[ 82] GK[ 71]
[01482] Q[0] E[0] M[0] | S[0] C[0] T[0] I[0] R[ 242, 274,8001] U[50] [13] *^
[01483] Q[0] E[0] M[0] | S[0] C[0] T[0] I[0] R[ 236, 279,8000] U[50] [14] *^
[01484] Q[0] E[0] M[0] | S[0] C[0] T[0] I[0] R[ 237, 281,8000] U[50] [13] *^
[01485] Q[0] E[0] M[0] | S[0] C[0] T[0] I[0] R[ 234, 280,8000] U[50] [09] *^
[01486] Q[0] E[0] M[0] | S[0] C[0] T[0] I[0] R[ 233, 269,8000] U[50] [13] *^
          HR[05] HT[03] DV[00] TR[02] BT[00] TW[00] UI[00] EN[00]
   T5[118] | [ 97][115][ 75][ 86][ 94][118][ 87][ 87] | [  3] [C-K-MK]
     X1[ 97] X1[ 79] GK[ 68] GM[ 92] GK[ 68] GK[ 69]
[01487] Q[0] E[0] M[0] | S[0] C[0] T[0] I[0] R[ 224, 272,8000] U[50] [14] *^
[01488] Q[0] E[0] M[0] | S[0] C[0] T[0] I[0] R[ 238, 274,8001] U[50] [13] *^
[01489] Q[0] E[0] M[0] | S[0] C[0] T[0] I[0] R[ 241, 277,8000] U[50] [09] *^
[01490] Q[0] E[0] M[0] | S[0] C[0] T[0] I[0] R[ 245, 273,8000] U[50] [13] *^
[01491] Q[0] E[0] M[0] | S[0] C[0] T[0] I[0] R[ 232, 282,8000] U[50] [14] *^
          HR[04] HT[03] DV[00] TR[02] BT[00] TW[00] UI[00] EN[00]
   T5[118] | [ 87][116][ 75][ 87][ 86][118][ 87][ 86] | [  4] [C-K-MK]
     X1[ 99] X1[ 68] GK[ 68] GM[ 95] GK[ 68] GK[ 68]
[01492] Q[0] E[0] M[0] | S[0] C[0] T[0] I[0] R[ 228, 277,8000] U[50] [13] *^
[01493] Q[0] E[0] M[0] | S[0] C[0] T[0] I[0] R[ 236, 275,8000] U[50] [09] *^
[01494] Q[0] E[0] M[0] | S[0] C[0] T[0] I[0] R[ 211, 272,8000] U[50] [11] *^
[01495] Q[0] E[0] M[0] | S[0] C[0] T[0] I[0] R[ 124, 161,8000] U[50] [12] *^
[01496] Q[0] E[0] M[0] | S[0] C[0] T[0] I[0] R[ 123, 163,8000] U[50] [12] *^
          HR[03] HT[05] DV[00] TR[01] BT[00] TW[00] UI[00] EN[00]
   T5[120] | [ 86][115][ 71][ 87][ 96][120][ 87][ 94] | [  4] [C-K-MK]
     X1[ 99] X1[ 79] GK[ 67] GM[ 95] GK[ 68] GK[ 76]

99
Game Support / Re: Problem with new Fortnite ST
« on: 06:36 PM - 08/28/18 »
Great, thanks. If you could verify your ST version number you're using as well, you can find this by clicking the center of the game picture on Manager's HUD screen. The last digit of this text is the version number. I'm about to sign off for the night but will be available to help tomorrow at an earlier time.

Sure, X1.5 is the ST number. Same here, have a good night and talk to you tomorrow.

thanks again!

100
Game Support / Re: Problem with new Fortnite ST
« on: 06:11 PM - 08/28/18 »
Xdrqgol, the look mechanic changed earlier this week and support was updated.

After downloading the update you are required to create a new game config. Once the updated config is created you can then rename or delete the old config.

To manually download this update, open XIM Manager and go to menu->global settings then force a library update. PC users may need to run XIM Manager as administrator.

-

Also, using the latest support I am not experiencing non movement issues that you are reported. A great deal of time is spent ensuring that micro movement is smooth for each game before support is made available. This could be due to either using an outdated smart translator, or could be config or setup related. The next time this occurs please share a tracelog, it could tell us more about the issue. The link below contains instructions on how to capture the log. Be sure to have the log window open while gaming. After the issue occurs please share the last 25-50 lines of the log in your message here. Note the instructions are the same for both XIM4 and XIM Apex.

http://cloud.xim.tech/Debug/XIM4TraceLog.pdf

Will work on it and provide de log.

I have and always have followed the instructions for a new config as you mentioned, so this has been already done.

Will be back once I have the log ready. Thanks for the reply.

101
Game Support / Re: Problem with new Fortnite ST
« on: 05:22 PM - 08/28/18 »
Something is definitely wrong...and it would be great if someone from the XIM devs can look into it...with all the info provided, pretty sure the ADS translator is acting funny or something has been forgotten  on this new update...we need an update to this problem,please.

on 23rd August, this has been posted:

"the new fortnite update changed the aim mechanics for console controllers and also made some deadzone changes for xbox specifically. does anyone have an idea on when we can get this updated with our fortnite configs?
"

I am too on XBOX, clearly something has been forgotten or something has been ignored , otherwise I cannot explain why we have these issues...

thanks and that's it from me.

102
Game Support / Re: Problem with new Fortnite ST
« on: 05:19 PM - 08/28/18 »
You said you play with Aim assist off right?

Can i just ask why you are using the Xim then?

Surely just use native and have the aim fine and also better weapon and build options.

Actually I am very comfortable with the current mapping, thus why I am not changing...but will definitely think about this and sell my XIM APEX...

103
Game Support / Re: Problem with new Fortnite ST
« on: 05:18 PM - 08/28/18 »
Are yíall sure this isnít part of the game?Because I read when that purple cube. Came on the game that the game will act like itís glitching because itís part of the story line so maybe thatís whatís going on.

Lmao

LOL...jesus

104
Game Support / Re: Problem with new Fortnite ST
« on: 03:28 PM - 08/28/18 »

- happens on all weapons / sight - seems a general issue cross weapons
- Default SYNC (never changed it)
- NO delay on ADS

Pretty much default ST without changes, only changed Sensitivity to HIP and ADS everything else unchanged.

With this being said, if you try this, try to move the mouse very slow and see that there is no movement registered...During fights, when you try to keep the ADS on the opponent (when slow movement to keep shooting on a specific spot), you end up not moving at all which is as you can expect a bit infuriating crazy. Then if you try to move faster , well there is no point, you will miss the shoot and probably be killed.

This sums up pretty much how the new ST works.

Again this is on precise aiming as well have tested for the past hours , happens in hip as well if you try to barely move the mouse , nothing registers through Xim Apex...

This makes me believe they damaged the deadzones , which implies that in order to perform a movement/aim action you have to reach the trigger value...not sure if this make sense at all...have to check with the controller and see if I can repro this with the controller.


Did you by any chance try another mouse? Itīs a weird issue tbh.
[/quote]

Obviously i did and the same thing happens :( ...actually going deeper with my tests found the following:

controller dead zones are ok ,no worries here meaning that ADS translater on XIM APEX is the one responsible...

IF you move your mouse on spot, left right you will notice the missing translations...basically no movement is registered. If I plug the mouse and play with it, it is a difference from earth to moon in terms or movement registration...Actually this how I tested XIM once I started playing with him , and before this update playing with XIM or Mouse on computer felt no different...

I am telling you, something is wrong while using XIM APEX...and this hasn;t been the issue before this last XIM .5 update


105
Game Support / Re: Problem with new Fortnite ST
« on: 02:20 PM - 08/28/18 »
Well to those who are saying that this ST is working great and the rest of us are trippin ...please make us a favor and remove yourself from this thread, stop wasting time and wasting the air !please!

Alright, for those who want to try, I might found the issue:

--happens on 4k dpi , on 12k dpi ...doesn't matter what dpi...--

The issue happens, for me at least , when I am trying to correct the ADS while shooting , and for this you need to be smooth...well I realized if I move the mouse slow to perfect aim or control the ADS while shooting (like any other professional player is doing) ...the XIM APEX doesn't register any movement...AT ALL!


!OBS

This happens if you do very slow movements to correct your aiming position while ADS.

This issue was not present previous to this update, as well for those who will again "bark" it DOESN'T HAVE ANYTHING TO DO WITH AUTO AIM. I always keep it disabled.
We'll need more info to understand what might be causing this.

Which weapon and sight are you using?
Which sync are you using?
Are you using a delay on your ADS setting page and if so what is it?

- happens on all weapons / sight - seems a general issue cross weapons
- Default SYNC (never changed it)
- NO delay on ADS

Pretty much default ST without changes, only changed Sensitivity to HIP and ADS everything else unchanged.

With this being said, if you try this, try to move the mouse very slow and see that there is no movement registered...During fights, when you try to keep the ADS on the opponent (when slow movement to keep shooting on a specific spot), you end up not moving at all which is as you can expect a bit infuriating crazy. Then if you try to move faster , well there is no point, you will miss the shoot and probably be killed.

This sums up pretty much how the new ST works.

Again this is on precise aiming as well have tested for the past hours , happens in hip as well if you try to barely move the mouse , nothing registers through Xim Apex...

This makes me believe they damaged the deadzones , which implies that in order to perform a movement/aim action you have to reach the trigger value...not sure if this make sense at all...have to check with the controller and see if I can repro this with the controller.

Pages: 1 ... 5 6 [7] 8 9 10