Messages

1

Game Support / Re: Destiny 2: My Advanced Setup (Updated 9-22-17)

« on: 12:30 PM - 11/22/17 »

Are these setting working good for ps4? Or they are XBox only?

Good for PS4 also.

2

Hardware Compatibility / Re: FragFX FragChuck (PC/MAC) (splitfish)

« on: 10:43 AM - 11/03/17 »

Ok bit late, but may help people out if they are thinking of getting one.

It works straight out the box in controller mode, I didnt try keyboard mode.

It's basically just the same old chuck from the PS3 days which worked fine.

Horrible company to deal with, and the full mouse solution is garbage, but credit to them this chuck is great - very comfortable and loads of button, the build is great I only got this a replacement as I have been using my original one since BO1 I would say well over 10,000 hrs played and I am only replacing the old one as the buttons are only now feeling a little loose.

AA battery life is great also.

3

Technical Support / Re: [RESOLVED] Xim stops responding

« on: 10:06 AM - 10/20/17 »

I think maybe my day 1 PS4 could be on the way out then, Had a few issues with the HDMI singals to my monitor randomly goign off briefly of late.

4

Technical Support / Re: [ACTIVE] Xim stops responding

« on: 10:03 AM - 10/20/17 »

Dont worry I think its solved - for some reason despite this controller being hard wired in to the PS4 for over a year and being in use on my PS4 it started connecting again to my sons PS4 downstairs!

It used to be my sons but L3 stopped working so we swapped his over with mine over a year ago.

I have no idea why the hell this would happen? he hasnt even turned his PS4 on in months!

5

Technical Support / Re: [ACTIVE] Xim stops responding

« on: 09:48 AM - 10/20/17 »

Mist this is an original PS4 with original controller?

6

Technical Support / [RESOLVED] Xim stops responding

« on: 03:16 AM - 10/20/17 »

Last night whilst playing  Destiny 2 something weird started happening.

Every 5 minutes or so the controls would stop responding at times it would cause my character to run in circle whilst looking in the air or just fall off a map - or just not respond at all. pulling the usb going in to the ps4 and plugging back in would clear it, after a few seconds but it would then happen again a few minutes later.

Should also add that the controller itself is also unresposive when thhis happens, could be a PS4, controller or Xim issue? anyone comes across this before?

Firmware 20160918.

7

Game Support / Re: Destiny 2: My Advanced Setup (Updated 9-13-17)

« on: 05:31 PM - 09/13/17 »

RML, are the different x-y ratios on the 3 curves intentional?

8

Game Support / Re: Destiny: My Advanced Setup (Updated 8/06/17)

« on: 12:46 AM - 09/09/17 »

@mist - was there many changes mate?

9

Game Support / Re: Destiny: My Advanced Setup (Updated 8/06/17)

« on: 12:52 AM - 09/08/17 »

Does this happen to anyone? In D2 wgenever i try to dismantle a weapon it keeps cancelling when i hold down the square button to dismantle (i have square binded to r)

Yeh strangely.. never did it on D1 for me..

10

Technical Support / Re: [Q/A] G700s stuttering

« on: 01:04 PM - 08/30/17 »

remind me how do I do a tracelog again? been a while since I have had any issues 

11

Technical Support / Re: [Q/A] G700s stuttering

« on: 12:42 PM - 08/30/17 »

Yep I have used it like that for years, but as of today I need to swap them or the mouse plays up very wierd!

12

Technical Support / Re: [Q/A] G700s stuttering

« on: 12:30 PM - 08/30/17 »

Cheers Mist.

Happens with 2 other G700s so 3 total and 2 different mouse matts or the desk - tried wired works fine.

I am happy to use the left port for the wireless dongle as everyting works prefectly then. Just strange that after years of use the right port doesn't like to work wireless anymore.

13

Technical Support / [Q/A] G700s stuttering

« on: 12:17 PM - 08/30/17 »

Running firmware 20160918.

Tried swapping mouse no different, tried mouse matt no different - then I swapped my G700s wireless dongle from the right hand port into the left and swapped my chuck dongle in to the right and both work perfectly? swapped them over like 20 times and the fault instantly comes back. it moved about 1cm and then sturtters then moves a nit more again etc.

This is really weird any ideas? It works fine with them reveresed just wondering if it means I am likely to have more issues down the line?

Cheers

14

XIM 4 Discussions / Re: Splitfish officially licensed

« on: 12:40 PM - 02/21/17 »

The Frag chuck is amazing, the mouse side is garbage

What do you like about the chuk?

Feels way more comfortable than a nav mate.

No need to charge, one decent quality duracell battery will last for months playing around 6-7 hours a day.

Also I have been using mine daily for hours as mentioned since the days of black ops 1 and it's still going strong!

Sent from my D6603 using Tapatalk

Does the chuck work perfect with the Xim4? Being that you're not using the mouse that comes with the chuck do you notice any problems being that you technically have two mice connected to the Xim4? Which model do you recommend?

I use a g700s as I like wireless and has a good amount of buttons.

No issue with the chuck at all but it's the old ps3 model can't imagine it's much different this time around.

The dangle goes in the xim and the chuck connects via Bluetooth to that.

Sent from my D6603 using Tapatalk

Thank You. Have you ever used the Sony Nav and if yes, does one feel more responsive than the other?

I couldn't get on with the nav felt uncomfortable and always charging etc.

Sent from my D6603 using Tapatalk

15

XIM 4 Discussions / Re: Splitfish officially licensed

« on: 01:03 PM - 02/20/17 »

The Frag chuck is amazing, the mouse side is garbage

What do you like about the chuk?

Feels way more comfortable than a nav mate.

No need to charge, one decent quality duracell battery will last for months playing around 6-7 hours a day.

Also I have been using mine daily for hours as mentioned since the days of black ops 1 and it's still going strong!

Sent from my D6603 using Tapatalk

Does the chuck work perfect with the Xim4? Being that you're not using the mouse that comes with the chuck do you notice any problems being that you technically have two mice connected to the Xim4? Which model do you recommend?

I use a g700s as I like wireless and has a good amount of buttons.

No issue with the chuck at all but it's the old ps3 model can't imagine it's much different this time around.

The dangle goes in the xim and the chuck connects via Bluetooth to that.

Sent from my D6603 using Tapatalk