XIM Community

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Guilherme

Pages: [1] 2 3
1
Works for me.. I have the middle button as a macro. Use 60ms as your delay and add another 60ms delay at the end

If you hold the button does it keep repeating the macro or do you need to press again?

I need a mouse model that repeats the macro countless times just holding the button and not forcing me to click.

Could someone please test for me if this pressed repeat functionality works?

Thank you!  :D

2
Guys, in some reviews, I noticed that it does not accept mouse click to create the macros, but I believe you can work around this situation by using a second key for the desired key in xim manager.

Could you tell me if this macro, if configured with the "cycle until the key released" software, option would work on the xim normally?

3
Glorious model o

Man, in some reviews, I noticed that it does not accept mouse click to create the macros, but I believe you can work around this situation by using a second key for the desired key in xim manager.

Could you tell me if this macro, if configured with the "cycle until the key released" software, option would work on the xim normally?

4
Hello guys. I would like the help of yours to find a mouse that works onboard macro on all buttons.
The main functionality I need is something like a rapid fire. The left click can be repeated several times while holding down the button (very important point to work in XIM APEX, where it repeats the macro infinite times while holding the button).

Today I have a G603, however it does not allow me to do this configuration.
Thanks  :D

5
I have an idea you can try:

Go to FN settings/accessibility. Then toggle ‘Lock input method as mouse’

Maybe that will help? Good luck.



It did not, thank you for trying though



Man, in Xbox work fine, but PS4 I have a same problem.
Can you find a solution?

6
Game Support / Re: Fortnite - Xim Apex + KB
« on: 08:48 AM - 05/31/19 »
you can use double inputs (xim + keyboard) but there are sometimes bugs specifially with that input method and epic doesnt address those very quickly
for example theres currently a bug (or maybe it got fixed with last weeks update) that when you use double inputs the turbo builder wont work
it got introduced with season 9 and a few people in the xim forums have already complained about that.



My only fear of getting used to playing this way is in future upgrades they remove this support, and I end up having to get used to the old commands again.
Or for some reason this generate logs and lead to banning the account.

I'll hope this does not happen.  ::)

7
Game Support / Re: Fortnite - Xim Apex + KB
« on: 12:46 PM - 05/30/19 »
you can use double inputs (xim + keyboard) but there are sometimes bugs specifially with that input method and epic doesnt address those very quickly
for example theres currently a bug (or maybe it got fixed with last weeks update) that when you use double inputs the turbo builder wont work
it got introduced with season 9 and a few people in the xim forums have already complained about that.

Od1n, I discovered that this was not a bug. After many tests, this problem in turbo building was a layout configuration in the fortnite itself.

Example:
If I put a button just to confirm the selected current piece and I had another boon assigned to a specific part, the bug occurred.

I'm currently liking the way it's working, actually very similar to the PC.

8
Game Support / Re: Fortnite - Xim Apex + KB
« on: 01:15 PM - 05/28/19 »
As far as input lag goes, I did not notice a difference on my xbox. I have not had any trouble mapping builds onto mouse, so I cannot help you there. PC inputs are superior to xim inputs for fortnite in my opinion, so I would use kbm directly if you are fine with playing in PC lobbies, otherwise use xim. Hope this helps

Thanks for the feedback
I started testing using the two simultaneous devices.
The most interesting is the quick shortcuts it allows, such as slot switching directly, but the menus can only be accessed by the controller.

9
Game Support / Fortnite - Xim Apex + KB
« on: 07:54 AM - 05/24/19 »
Hello guys.
I would like to take a question with you.

I recently discovered that I can play Fortnite with a keyboard plugged directly into the console and the mouse on the xim apex. This allows me to access PC keybinds, such as building selection and individual weapons slots.

Do any of you use it? Could you tell me if in the matter of input lag this is advantageous?

Another question, to build I edited the layout of the direct control in the game to put any construction on the mouse, (same as the PC) however the turbo building does not work. Have you been through it too?

Thank you.

10
Hello guys
I wonder if I can get back to the official firmware (Not beta) if I encounter any problems.

Thank you

11
Changes are listed at the top of the first thread at https://xim.tech/beta

I also noticed that all of the keys you mentioned that are working are modifier keys. The keyboard may be waiting for additional input e.g Ctrl+X etc, I've seen this happen with Stinky foot pedals.

Perhaps define Secondary bindings just for the macro and bind the macro to those keys instead, e.g H, J, K, L instead of Alt, Ctrl, Shift etc (or use whatever buttons register in XIM Manager).

I did something like this, but I only managed because the fortnite allows you to customize the buttons.
I configured the primary manager LB and RB for Q and E, and secondary RALT and RCTRL, so when I configure my macro by PC software, the sequence is:

Key 1: RALT (3x)
And when I play, I use Q.


Is that what you said?

But I'm still limited to only those 7 keys while the keyboard has more than 50.
I am thinking of updating and testing if this problem is fixed, as I am afraid of stopping it all.  :(

12
I confess that I had not updated to date for fear of some functionality (bug) to damage my experience.

Considering this, I would like to use the topic to ask: What were the main changes since the last version released (my current one). (I know it has features like SAB, Boost ... but I would like to know about the other changes)
Also, I would like to know which beta is more "stable".

Thanks

13
No.

The software was installed on one machine only for macros configuration, but on other tested PCs it did not need to be installed.

An example of this was the use of the keyboard in the office, where I configured a macro (on my personal computer) to unlock the PC without the need to enter a password (it did not have software installed).

Some extra info:

Xim Apex: Firmware 20180402 (not beta)

14
Hello guys
I have a problem and I would like the help of the community.

I bought a keyboard with macro onboard (Redragon k551) to change weapons in the same fortnite in the pc (1,2,3,4 ...).
When configuring the macro, I noticed that not all the keys that work in XIM, just the ones below:

LShift, RShift
Lalt, Ralt
Lctrl, Rctrl
Lgui


That is, if I configure a macro using other keys, for example:

Key 2 - Execute (E, E) equivalent L2, L2.
It does not recognize, forcing me to reconfigure some keys in the XIM application.

To get the same result I need to configure it as follows:

Key 2 - Execute (LCTRL, LCTRL) equivalent L2, L2.
It works.

I tested on several systems and pcs and they all worked, but XIM limited me to those 7 keys.
Could you tell me if the problem is in communication with XIM or the keyboard itself?

Thank you.

15
I would like to take the topic to ask a question.
Recently I returned to play MW3, but I feel a slight delay (1sec approx) when encountering an enemy. Have you been through this?

Pages: [1] 2 3
Admin