XIM Community

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Agathon

Pages: [1] 2 3
1
XIM Link / Re: Newly random disconnects?
« on: 03:13 PM - 04/16/20 »
So... is the current best option to just use a USB Switch?

2
XIM Link / Re: Newly random disconnects?
« on: 08:46 PM - 04/12/20 »
Your cable is not going bad, i have this issue all the time. the worst is when you lose all mouse movements and your keyboard works, and you have to close the program and reopen it about 5 times or do a full pc reboot.
Yeah, I know that was silly the cable isn't going bad. That's the thing though, nothing else applies.

The PC I use is my old gaming PC that has almost nothing else running, CPU/Memory issues are not happening.
Xim Apex moving / Controller Unplugging can't happen. I have all of the cables managed leading into a cabinet and they have zero movement on both ends.
Headset is wireless and stays functional the entire time.
I don't run any AHK scripts, Link has a blank profile.

This only leaves random error caused by the program, from your list. Like I said though, I've run this setup for a LONG time and this is very new in the past few days. It's occurring to the point where games are unplayable.

the likeness of this issue is xim link is out dated, with out a update, there is nothing we can do about this issue :P One thing i do is i run the program with administrative rights, and change high DPI setting ( High DPI scaling behavior)
There must be something that can be done to fix it on our end. It's been working fine forever and nothing has been updated or changed. Why all of a sudden would it not work now in the past few days after well over a year of solid functionality?

It doesn't matter how many times I restart my PC, what order I plug everything in, or anything. I can't seem to get any method of reliable connection in the past couple days. I just don't get it :(

3
XIM Link / Re: Newly random disconnects?
« on: 11:20 AM - 04/12/20 »
Your cable is not going bad, i have this issue all the time. the worst is when you lose all mouse movements and your keyboard works, and you have to close the program and reopen it about 5 times or do a full pc reboot.
Yeah, I know that was silly the cable isn't going bad. That's the thing though, nothing else applies.

The PC I use is my old gaming PC that has almost nothing else running, CPU/Memory issues are not happening.
Xim Apex moving / Controller Unplugging can't happen. I have all of the cables managed leading into a cabinet and they have zero movement on both ends.
Headset is wireless and stays functional the entire time.
I don't run any AHK scripts, Link has a blank profile.

This only leaves random error caused by the program, from your list. Like I said though, I've run this setup for a LONG time and this is very new in the past few days. It's occurring to the point where games are unplayable.

4
XIM Link / Newly random disconnects?
« on: 09:22 AM - 04/12/20 »
Hey all,
I've had Link set up for a really long time and never had any problems. In the past few days, I've started to get all kinds of random disconnects / XIM Apex not detected / etc. Nothing has changed at all as far as software, firmware versions, or anything. I haven't done any updates since this started happening. Any idea what it could be? It will randomly reconnect and doesn't seem to matter what I do. I've tried different usb ports on both my PC and on the xbox and nothing changes it.

Have any of your Belkin cables started "going bad"? I have no idea where the fault is. I don't know if it's with my Xim Apex or with the Belkin cable.

5
Upon creating my Warzone configuration using MJFames extreme method. I have been trying it on Apex Legends. This is what I have currently and I can say it feels 1:1 and at turn cap speed at all times. You can adjust the sensitivity by curve only (read his tutorial to learn how to do so)
Apex Legends ST
800dpi
1000hz M & XIM
ALC On



Profile Code:
Code: [Select]
>>> XIM APEX [extreme 800dpi] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<
Can you post the curve you're using based on mfame's advice? the full config you posted looks like the default curve

[edit] - nevermind, after reading his post I just went with [email protected] and it seems to work pretty smoothly

6
do you mind sharing your aux settings for warzone?
Pretty basic... I added a key for Turn Assist on the Hipfire page to help with the initial drop.

Auxiliary 1:
Set activation key to Down Arrow
Clear out all Movement
on Right stick set Left Arrow and Right Arrow

That's it.  This just allows you to use left and right arrows to navigate the inventory while holding arrow down.
It's probably not even necessary though. I've not used it once... I feel like it'd be pretty rare on this game to need to drop ammo or anything for someone but it could happen.

7
Latest FW + ST
1000hz 4000DPI Logitech G502 standard wired.
In game settings:
ADS Low zoom: 1.15
ADS High zoom: 1

XIM Settings:
Hip
27.50 Sensitivity
Common sync
1 smoothing
No curve
SAB Off

ADS
16 Common Sync
1 smoothing
1.1 X/Y to help recoil a slight amount
No curve
0 SA
SAB off

Havenít updated yet to test on new update in case of an aim mechanic change so if itís off itís either that or I said the wrong DPI if not try 2000 and change sens accordingly think 4000 was smooth and snappy.

If change my settings to accommodate the SteelSeries Rival 600 I will post it.
I've been using this today on Warzone. It works good, I made some minor tweaks and added an auxiliary behavior for the inventory. Thanks!

8
I'm working on my config. Mostly is good. I can get the mouse to control the  cursor when I go into the inventories. But when I go into loot I can not get the movement bindings (WASD) to control my player movement when looting. It just keeps controlling the cursor like the mouse is. Is there something I'm missing? I've tried entering the WASD into the right stick bindings also with no luck. Basically I want to be able to loot while still staffing my player around.

This is possible on PC. Not on console as far as I know. Think about it when you use controller you move character with left stick. You also use that to navigate the inventory. You can't do both at same time.

Yep, not possible on console.
Also I will update to the latest beta firmware this evening.
Any further updates?

9
Kryo11, any chance you can update this with the latest beta firmware?

This is the latest beta firmware. Are you sure you have it? Perhaps your not using beta?
Dang, I must have missed a beta update. I thought I was updated. I'm on the previous revision. Sorry & thanks.

I got it working.

10
Kryo11, any chance you can update this with the latest beta firmware?

11
I ran my nitpicky test XD.

I happy to confirm the Smart Translator is FLAWLESS. 100% consistent turns, perfect circles and saw pattern.

Awesome Job XIM Team.
Hip is pretty flawless for me. ADS is very sticky/jumpy when attempting fine movements. Not sure why...

Unfortunately, I have the same feeling. Does anyone know improvements?
I play with 12000 dpi, 1000hz with stealseeries dex mousepad and logitech g403 mouse.

Have you changed both of the deadzone settings in the bf settings and not just one of the deadzones?

I'm also on 12000 dpi and 1000hz and it is flawless, tbh it feels the best of any game I've played so far
Yes, I reset everything to defaults and then enter the Battlefield 5 settings. Which sync do you use?
This was fixed above. Be sure you changed both Deadzones. My issue was the right Dz was not adjusted properly.

12
I ran my nitpicky test XD.

I happy to confirm the Smart Translator is FLAWLESS. 100% consistent turns, perfect circles and saw pattern.

Awesome Job XIM Team.
Hip is pretty flawless for me. ADS is very sticky/jumpy when attempting fine movements. Not sure why...

I had same issue and found out it's because u only changed the deadzone on the left stick and not the right. Make sure both stick zones are changed in bfv
Shoot! I just got back home so I'll update that shortly. I can say with confidence you are correct. I only changed one deadzone setting.

Thanks!

Edit: Fixed. Smooth like a molten blade on butter.  Like a freshly waxed bowling ball.  Like a bald Monk's head.

13
I ran my nitpicky test XD.

I happy to confirm the Smart Translator is FLAWLESS. 100% consistent turns, perfect circles and saw pattern.

Awesome Job XIM Team.
Hip is pretty flawless for me. ADS is very sticky/jumpy when attempting fine movements. Not sure why...

14
Game Support / Re: BO4 My Advanced Setup/Advice
« on: 06:50 PM - 10/16/18 »
I'm using his setup and the wingsuit requires turn assist. I don't see how he could play without it.

15
Game Support / Re: SW Battlefront 2?
« on: 08:24 PM - 08/08/18 »
Hi!:)

I played the game since launch everyday, dropped about three months ago.

The lag you perceive is from EA servers end, are atrocious with many random spikes of lag, one of many issues the game has, is fun but the multiplayer offer is shallow in comparison with the first Battlefront, that was so fun and underrated. XIM performance was golden, pretty much identical to PC out of the box.

On Battlefront 2 the aim assist is insane strong, 1000Hz response rate is a must to get enough Aim Assist help and yet be able to cut-through the bubble.

My settings:
XIM Apex
HIP = 10.00 / ADS = 4.00 / Star Fighters 38.00 with Turn Assist on mouse side button 5
Sync = Common. Game runs 60fps strong, if you need less AA go Default.
Mouse: 4000 DPI, 1000Hz polling rate.

I used to be top 5 leaderboard mostly first place regarless of heros, vehicles or infantry.
Really? It doesn't feel like server lag. I seriously feel like it's my controls, but perhaps you're right. Thanks a lot for the settings, I'll play around with those. My mouse is on 12k dpi but I may drop it to 4k to see if it responds any better on this game.

Pages: [1] 2 3
Admin