XIM Community

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - ShaneN.

Pages: [1] 2 3 ... 30
Game Support / Re: Call of Duty: Vanguard ST - Rework?
« on: 08:39 PM - 12/05/21 »
Any update on this?

Leave the mouse at 1000Hz, the XIM will filter out the overhead.

I think I understand twitchy now. Even at the same dpi and sens, my new mouse didn't feel right after my first night of actual gaming. It felt like I couldmt keep on target, as if Sens was higher but wasn't. Hard to explain. I thought word twitchy was like skipping. O guess 1000hz poll on this way newer sensor is giving me that feeling whne it didn't on the really old DA. Dropped it down to 500h and it feels much like my old mouse did as for as throwing around the gun.

Game Support / Re: Call of Duty: Vanguard ST - Rework?
« on: 05:21 PM - 12/02/21 »
I was hoping to have it by this weekend.   I only have like 9 hours played... a month in.  :'(

For clarity, XIM 4 is 125Hz.

In regards to your mouse, the old DA probably has a laser sensor with acceleration. The new one is likely optical without acceleration and should feel more accurate and responsive, so you may need to change XIM sensitivity at the same DPI & polling rate.

Picked up the v2 pro tonight and played two quick games of rebirth, keeping the same dpi and Sens as before  and it does feel more accurate (don't think it was placebo), it doesn't appear like I need to make any slight ht changes - although I'll know for sure after more play this weekend. I left the new one at 1000hz (which I believe my old one would have been stuck at) and I don't notice anything feeling weird. Is there any reason why I might want to lower the hz to closer match the 125hz if I don't seem to have any negative effects?

Game Support / Re: Call of Duty: Vanguard ST - Rework?
« on: 12:33 AM - 12/02/21 »
ShaneN-Deactivation delays,there is no such thing on XIM4.

@#$%! I wonder if the people who are still having issues are on xim4 then, although it seems like about 90% of us agree on the rework so that can't be it. 

Hey, no need for that! He was only expressing his opinion.
And I agree that CoDís MP franchise is in a bad place now. Activision has put so much emphasis on making sure that n00bs get kills that it has taken too much of the skill (and fun) away from seasoned players: sbmm, poor map design, OP weapons, bloom, badly thought out challenges, poor player progression, lacklustre kill streaks, unrewarding objective play, etc. etc.).

I gave the free weekend a go. And although I felt it was much better than MW 2019 (the worst CoD ever made, IMO) it was nowhere near as engrossing or entertaining as the OG CoDs, or even the jet pack iterations (which I also enjoyed).
Unfortunately, until peeps stop buying the game (or another Dev (Respawn?) comes up with a CoD challenger) weíre going to keep getting the same type of game each year. One that I really donít like and wonít be buying).

I couldn't have said that better. mw19 is the first year of cod I couldn't even enjoy, i literally stopped playing it fairly earl and played a second year of bo4, but this cod might not be far behind for me - although I hope it's not the case.  even cold war last year was a lot more fun (so far).  I just feel so average of a player in this one for some reason and I'm used to being first in my lobbies most the time.  And dont even get me started in the pacings, it's so broken and a stupid idea.  Just give me all maps or MAYBE 8v8 in some of the larger ones.  Hardcore already has a limited pool of people to play against, why split that amount of people into 3 smaller categories.  I HATE the blitz maps. 

I only play hardcore and I'm usually a mid 2 kd run and gun smg player and i'm stuck around 1.5kd in HC right now.  I find it hard to see people that are just laying down and actually camping.  There is also long periods of time where I see the guy as he sees me and he has time to stop running, aim, miss a few shots and hit me before I even get my gun ads'd (connection). It's been like that for a while but seems worse in this game.  Plus the nades and score streaks are so broken in HC, if you get the flame suite guy you end the game with him . And a thrown gammon (?) bomb is a guaranteed kill every time.  On top of it all, xbox's are still stuck on moderate for some reason when the rest of my cod games are open.  I think it needs a solid update and some balancing but I'm not sure why it's taken so long to get one. 

Game Support / Re: Call of Duty: Vanguard ST - Rework?
« on: 12:20 AM - 12/02/21 »
yup change to gradual and add 224 delay on both activation and deactivation and works perfect for me.

wait... DE-activation delay!?  is this on xim4?  I always load up my new configs on a new cod game and leave the ads delay to the default 224. but I don't see any place for a deactivation delay? Where do I find this? Attached pic is what I see on xim4 when i go over to aim down sights and go to activation..

XIM APEX Discussions / Re: Razer viper ultimate
« on: 10:41 PM - 12/01/21 »
I just scooped the deathadder v2 pro, cznt believe via much lighter it is than my old wired one from like 12 years ago. Might still get a viper ultimate to try a diffent shape

Edit: sooo just set up my new deathadder v2 pro to 3500 dpi like my old 10+ hear old deathadder and and playes two rounds of rebirth  i swear it feels more accurate/responsive/crisp. It's that just  the difference of a better sensor or placebo? Lol

XIM APEX Discussions / Re: Razer viper ultimate
« on: 05:37 PM - 12/01/21 »
Quality mouse, I just don't use it cause I absolutely hate the shape of it.

I think I'm going to pick up both that and a deathadder v2 pro tonight. They're both around half price until tomorrow at my local electronics store because of cyber Monday sales. Ive already been using an old deathadder got lole 12 years so the v2pro will feel more at home but everyone seems to love the viper ultimate

Great reply thanks. I waa going to try switching from my old deathadder 3500 to the new deathadser v2 pro or viper ultimate because I assumed a higher dpi and lower sense would help with max turn speed, which i know see it won't, but I think I'll still go pick one up today just for the sake of a better sensor and having no wire. I'll just set it back to 3500.

I'm assuming since my old mouse didn't have onboard memory that it was always using its max polling rate of 1000hz? It's weird I never noticed any twitchyness being as though it appears xim4 is 250hz and not changeable.

I has always thought the mouse had to be wired. I believe I saw in another thread that a deathadder v2 pro (wireless) would work on an apex, but how about the xim4?

Edit: Oops I meant to put this in xim4 section
yes but you need to setup site buttons on pc

They won't be detected by xim without? How do I do that? Just assign them as buttons on the snapyse app?

Thanks. Ans I assume the tiny dongle just goes straight into the xim (the death adder doesn't have the dock/extension)

I has always thought the mouse had to be wired. I believe I saw in another thread that a deathadder v2 pro (wireless) would work on an apex, but how about the xim4?

Edit: Oops I meant to put this in xim4 section
yes but you need to setup site buttons on pc

They won't be detected by xim without? How do I do that? Just assign them as buttons on the snapyse app?

XIM APEX Discussions / Re: Razer viper ultimate
« on: 04:57 AM - 12/01/21 »
I use the g305 at the moment. Itís kinda small for my hand, my pinky and wedding finger hang on the pad since itís kinda small. Is the viper a bit taller or wider ? Thinking of really getting this. G305 is my first wireless mouse and I donít think I wanna go back to wired lol.

It's been awhile since I used the G305 but according to the dimensions the Viper is just a little bit wider and longer. The height is the same. It's 25 grams lighter as well. I really liked the G305 but I needed more buttons.

The biggest difference to me is the light weight and performance. I thought the G305 and the G900 were as good as it gets for wireless tech. I've never used the GPro Wireless so I can't compare to it. This mouse just feels more responsive. I don't have to use any smoothing through the xim manager. No jitter, lag or any flaws for me at 3500 dpi.

I plugged in my G900 and used it again for another comparison and it feels like a tank lol.I don't think I'll ever want another mouse that weighs more than 80 grams

Have you tested which dpi it performs better on ? And the hz ? I play on xim4 so I know the adapter is at 125hz but idk if I should put it at 500 or leave it at 1000

Sorry old thread but I have the same question. Xim4 here too.

Game Support / Re: Call of Duty: Vanguard ST - Rework?
« on: 04:47 AM - 12/01/21 »
Hip translator for Hip and ADS translator for ADS

This ^^ + In-game "ADS Transition System = Gradual"

Same as me then... On 3.2 though I have huge jumps going out of ADS, both on Gradual and Instant. I've always used 224 deactivation delay but in this case I also tried 0 deactivation delay. Doesn't work for me unfortunately and changing deactivation delay for every diferent gun I want to use is not practical at all.

I just set it to 1.0 and raised the ADS sensitivity from 5.50 to 18.00. Deactivation delay is 224. It works well like this and feels very similar to the MW ST.

Weird, at 1.0, raising ads Sens and using gradual, I still had the issue.

Pages: [1] 2 3 ... 30