XIM Community

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - apoly1

Pages: [1] 2 3
1
Hardware Compatbility / [RESOLVED] Nintendo Joycon Help
« on: 02:26 PM - 03/30/22 »
How do I get the joycons to work?

I've connected the Left joycon via bluetooth to the xim (as you can see everything is connected) yet no bindings work, including Keyboard, Joycon or mouse?

https://ibb.co/2qdNXNR

Am I missing something?

2
General Discussion / Re: XIM Nexus Pre-Purchase Q
« on: 12:39 PM - 03/22/22 »
Thanks for your interest in NEXUS. Although the NEXUS Adapter looks the similar to APEX, it's very different. It's purpose is to only adapt NEXUS to consoles and only has enough compute power to do that. You'll want to keep your APEX if you want to continue to game with mouse/keyboard on consoles.

Thanks for the response. So if I purchase the Nexus I am assuming it can be used with the Apex Adapter for M&KB functionality (essentially replacing the Xbox/PS controller) and then I can switch from the Apex Adapter and Nexus Adapter when I want to go from M&KB to Controller?

If so, then i'm sold :)


3
General Discussion / Re: Looking for xim.apex
« on: 11:11 AM - 03/22/22 »
Anyone know where I can buy xim apex everywhere out of stock I'm in uk

Not sure if this is allowed, but im selling mine (UK) based as I am picking up a Nexus soon!

4
General Discussion / XIM Nexus Pre-Purchase Q
« on: 11:09 AM - 03/22/22 »
Hey all, I currently own the xim apex and love it but im in the market for a new controller (PS4 one broke) and I thought why not upgrade properly and get the nexus.

Just wanted to double check a couple things

1) Can I use the xim nexus with my xim apex i.e still with M&KB if I want too?
2) I see the xim nexus comes with the usb which I think I already own with my apex (looks identical but could be wrong) does this mean if i buy the nexus i can safely sell my apex (not the hub as I need this for putting 1,2,3 (C/K/M inputs in)

If that doesnt make sense let me know and ill clarify!

Thanks

5
Shared Configs / Re: Apex Legends - Nintendo Switch
« on: 06:40 AM - 03/11/21 »
Hey guys. Just figured out a great curve. Paste it under ballistic curve in ads.

>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:AAAAZQDKAS4BkwH4Al0CwQMmA4sD8ARUBLmFHgVGBW0FlQW9BeSGDAYbBioGOQZHBlaGZQa+BxcHcAfJCCMIfAjVCS4Jh4ngDGMO5RFok+oVVpbCGJIaYhwxHgEf0SGhI3AlQCcQ:X5BC
<<< XIM APEX END COPY <<<

For the setup to work you need a controller adapter for the switch. I'm using the cronus zen but there are other cheaper options.

Hey I will give this a go later and report. How does it play?

6
Shared Configs / Re: Apex Legends - Nintendo Switch
« on: 06:40 AM - 03/11/21 »
Thanks for sharing your settings.

How does the actual physical configuration with Xim Apex/Switch work? Please describe your setup, thank you.

Switch -> Mayflash adapter -> XIM

7
Shared Configs / Re: Apex Legends - Nintendo Switch
« on: 10:15 AM - 03/10/21 »
What in game settings are you using 7/7?

Yeah forgot to mention ill edit the main post

8
Shared Configs / Re: Apex Legends - Nintendo Switch
« on: 09:40 AM - 03/10/21 »
Feel way better than what I had. Ads still feels weird and the recoil sometimes is uncomfortable. I think it has to do with the game's poor performance

Yeah ADS recoil is sometimes a nightmare, but i'm getting much better results currently - I will keep tweaking and let you know if i get anything that's much better.

Try increase boost or the xy on ADS to 1.9 - really helps with Vertical recoil.

My main issue is getting to target quick - once there i can manage the recoil pretty well but it's like that first 1-2 seconds of combat the aiming is all over the place

9
Shared Configs / Apex Legends - Nintendo Switch
« on: 08:31 AM - 03/10/21 »
Hey guys, I appreciate this wont be useful for most people but I know some people are looking for a Switch config.

This is the best I've come up with so far and works pretty well.

Titanfall 2 Config.

Mouse @ 1000hz & 20k DPI
XIM @ 500hz

HIP
2.3
Default
Smoothing - 1
XY - 0
SA - 0
Boost 0

ADS
Delay - 10ms (SAT on)
2.0
Default
Smoothing - 20
XY - 1.80 (really balances it out, i find this is similar to 1.25 on PS4)
SA - 0
Boost - 750 (still playing around with this, couldnt tell difference from 500-1000)

In Game:
7/7
Small
Classic

Hope this works for you, and appreciate any advice if you have luck playing with some settings. I found Off, common and slow sync didnt work well and messing with ALC didnt provide any significant benefit either. I also tested the reccomended Apex config + ALC and that was a nightmare

10
Game Support / Re: Apex legends switch
« on: 02:48 AM - 03/10/21 »
Hey man, I am testing it as we speak.

Spent a bit of time getting all my keybinds to match my XIM perfectly and copied across my flying, looting, grenade and health pack axillaries.

Now I am trying to work with this aiming!

I've got 7/7 set as default (using Titanfall 2 config) and no ALC.

Using HIP and ADS OFF, 20 smoothing and it feels a little better than default but still somewhat choppy.

Anyone know what settings we can mess around with to give it a more smooth feel?

Edit:

I've tried Apex config with ALC - even with 50 hip and 20k dpi I couldn't move 10cm on my screen so that doesn't work.

Currently using Apex config with 7/7 and everything else default and it feels the "best" but still not great. The smoothness when using the ALC was the best but I couldnt get the sensitivity high enough.

11
Shared Configs / Re: MW/Warzone Advanced Setup (12/22/20)
« on: 12:13 PM - 03/09/21 »
Tested on both PS4 and PC.

Oddly enough it works incredible on PC - feels like I've got a very low tuned aimbot.

PS4 feels good but i find it a little harder to control recoil than on PC. Maybe this is because PC gives controller users added aim assist - who knows.

All in all, great set up.

12
We are working on a fix for this. Will be available within the week.

Apologies for bumping old post, canít find any confirmation that this has been 100% resolved - can you confirm that it now works wirelessly with no issues? Thank you

13
Hardware Compatibility / Re: Corsair K63 is compatible.
« on: 04:26 PM - 06/20/20 »
I'm sorry to hear that. It may help to reverse the mouse and keyboard cable positions at XIM4 then reconnect XIM4 to the console. This helps XIM4 identify some peripherals. If this doesn't allow the keyboard to be used it may not be compatible.

Yes, APEX's latest beta should support this keyboard in wireless mode without downgrading the keyboard's firmware.

Sorry for bumping an old post, to confirm the k63 works perfectly now in wireless mode on the xim apex?

14
Hardware Compatbility / Re: G305 and K63 Question
« on: 08:32 AM - 06/20/20 »
Thanks for your replies guys - appreciate it.

Does anybody have any experience with the K63 in wireless mode? I literally have it in my basket now ready to order 😂 just want to make sure it works with the xim apex! Thanks

15
Hardware Compatbility / G305 and K63 Question
« on: 04:30 AM - 06/19/20 »
Hi all,

About to buy the G305 but noticed the following in hardware capability: "Logitech G305 while it functions, it's reported to experience stutter and disconnects in wireless mode."

Also it says the K63 does not work in wireless mode? But some posts on the forum seem to contradict that.

Can anybody confirm if this is still the case?

Thanks in advance.

Pages: [1] 2 3
Admin