Messages

1

XIM APEX Discussions / Re: We need new ST for overwatch on PS4 and XBOX

« on: 03:20 PM - 10/15/19 »

time to use linear ramp guys xD

I'm using linear ramp and it acyually work..

gimme your settings please

https://youtu.be/MeDAJT3miAY
Follow this tutorial. Btw i'm using 1000 hz and 6500 dpi

2

XIM APEX Discussions / Re: We need new ST for overwatch on PS4 and XBOX

« on: 03:11 PM - 10/15/19 »

time to use linear ramp guys xD

I'm using linear ramp and it acyually work..

3

XIM APEX Discussions / Re: We need new ST for overwatch on PS4 and XBOX

« on: 02:48 PM - 10/15/19 »

Ye it's unplayable

4

Game Support / Re: Overwatch after patch 2.76 is messed up

« on: 02:05 PM - 10/15/19 »

Did they add gyroscope controls like on nintendo?

I don't know even what is that lol. But i read in the forum that this patch would bring something big in the ps4, now we know what lol

5

Game Support / Re: Overwatch after patch 2.76 is messed up

« on: 01:57 PM - 10/15/19 »

Same here, game is unplayable on Xbox with XIM.  If anyone figures out any fixes let me know.

Well then the problem is on both sides

6

Game Support / Re: Overwatch after patch 2.76 is messed up

« on: 01:55 PM - 10/15/19 »

ps4 or xbox?

Ps4 dude

7

Game Support / Overwatch after patch 2.76 is messed up

« on: 01:39 PM - 10/15/19 »

After I downloaded their last patch something in the aim mecanique went terribly wrong, my mouse movement keep jiggling.. am i the only one experience this?

8

XIM APEX Discussions / Re: My overwatch setup

« on: 01:39 PM - 03/04/19 »

100 xim sens
Sync off
800 or 1600 dpi depending on my mood
No curve
No smoothing or steady aim
Firmware 20180402 (thanks Maria)

Widow maker (very important) use 47 percent IN GAME relative aim scope

No ads obviously

I have 35 percent critical hit and 63 percent scope accuracy rn on my master smurf. Idk if his stats will show on overbuff yet but the account name is TopThrowerNA.

Currently placing aside masters and on 3 game win streak.  I’ve been called smurf every game lol. I think Maria found the immediate issue, although I hope we continue to work on this ST as there are still lots of problems

I tried this setup.. i just maxed my dpi 12k for cut AA and with projectile heroes i'm rocking.. still some problems with hitscan, specially with widow.. with the big window size i feel like my trigger is pulled really hard.. i'll try lowering first the window, then AAEI

9

Technical Support / Re: Xim Apex keep getting corrupted.. help please

« on: 06:27 AM - 02/13/19 »

I did the factiry reset and then i didn't use any backup

10

Technical Support / [ACTIVE] Xim Apex keep getting corrupted.. help please

« on: 04:42 AM - 02/13/19 »

Hello guys, yesterday my apex started not working, it was having the rainbow sequence and i read from a admin that i had to format it so I did.. but whenever I unplug it from ps4, it keep getting the rainbow sequence, so I have to re-do the fornat sequence.. how can i fix this problem?

11

Technical Support / [ACTIVE] Xim Apex suddendly stopped working (PS4)

« on: 05:42 AM - 12/29/18 »

Hello, I will descrive the situation with details, i bought xim apex 2 days ago and all was fine, today also was working, I decided to switch from 1000hz to 500hz in the manager and when I did it, apex started changing colors and stopped working.. i search in the forum and from an Admin i read that i had to factory reset and so i did, in fact when I plugges in the rainbow cycle stopped, and I got the stable Red color one. In the manager all is working, there are the 3 icons of devices (m/k/xim), but it's like ps4 doesn't recognize it, I tried to factory reset again and nothing really happend. I tries to connect the apex hub (wirh mouse and keyboard already plugged) in the PC, and it's also working. It's like xim doesn't recieve any imput, in fact when i use keyboard in ghe manager i don't see nothing. Please help me, thank you in advance

12

XIM APEX Discussions / Re: I think I have found the best settings for Overwatch with Xim apex ( imo )

« on: 03:46 AM - 08/05/18 »

Hey, guys would be interested what you think about this setting. would love to get some feedback

Ballistic Curve:

>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:g+gEqwVuBjIG9Qe4CHsJPwoCCsULiAxMDQ8N0g6VD1kQHBDfEaISZhMpE+wUrxVyFjYW+Re8GH8ZQxoGGskbjBxQHRMd1h6ZH10gICDjIaYiaiMto/AkmiVEJe6mmKboJvUnAycQ:X5BC
<<< XIM APEX END COPY <<<

complete config:

>>> XIM APEX [Overwatch a-d crouch] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

can you explain in detail how to use this for xim4? I would really appreciate it

13

Game Support / Re: OVERWATCH Linear Fix

« on: 07:59 AM - 01/18/18 »

This is my linear setup on Xbox One:

OW Settings: 100 horizontal/vertical sens, 100 aim assist strength, 3 aim assist window (this is personal preference, but I recommend something in the 0-5 range. Linear setup does not feel very good with a large aim assist window because it becomes difficult to break into the aim assist bubble around enemy bodies), 0 aim ease in. Of course, use Linear Ramp and make sure you are not on Expo or Dual Zone 

- Console Controller Crossover ST (you cannot use the official Overwatch ST with this Linear setup)

- 2000 mouse dpi, 500hz polling rate (I recently moved back to 500hz polling from 1000hz and it just feels a lot better and more consistent to me on all mice), 152.50 XIM sens (linear requires a much higher XIM sens than the usual expo ramp setup on the official OW ST). I feel like this might explain why some people feel linear is too sluggish? Perhaps you used too low XIM sens. If you want to match my XIM sens but want to use a higher mouse DPI like 12k or something, then use this DPI calculator, punch in your numbers (put my 2000 dpi & 152.50 sens in the "current DPI" & "current sensitivity" box) and put your desired DPI in the box and then use the sensitivity that it gives you as your new XIM sens.

- 1.50 Y/X ratio (absolutely necessary because vertical sens seems to be slower on the console controller crossover ST, 1.50 Y/X makes them equal)

- Use the following 12.0 curve if you are on Xbox One:

Code: [Select]

>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1GCIsNkBKVF5ocnyGkJqkrrjCyMjI:X4MB
<<< XIM4 END PASTE <<<
Or use the following 8.0 curve if you are on PS4:

Code: [Select]

>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1EBokLjhCTFZganR+iJKcprC6xMjI:X4MB
<<< XIM4 END PASTE <<<
NOTE: I do not have a PS4 and some people have reported that 8.0 is not enough to overcome the deadzone problem. You can see if you are having the deadzone problem by moving your mouse in VERY VERY small movements (I am talking pixel by pixel movement on screen). If you are not getting movement or getting choppy movement, then use the 8.5 curve below instead:

Code: [Select]

>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1ERslLzlDTVdha3V/iZOdp7G7xcjI:X4MB
<<< XIM4 END PASTE <<<
These curves are strictly designed to just overcome the deadzone problem and nothing else. I am kind of wary of the above PS4 curves because since I don't have a PS4 I haven't tested them personally. If 8.5 is too high of a value, it will end up feeling floaty and you won't have a good experience. That is why I suggest trying the 8.0 first. You want to use the lowest number possible for it to feel like 1:1 mouse movement. But for Xbox One I can vouch that the 12.0 curve above is perfect for overcoming the deadzone.

Another thing that I feel is really important is to use a gold XIM firmware. By that, I mean DON'T use one of the experimental SA firmwares. There are a lot of people on these experimental firmwares and it will affect your ability to use the Linear setup properly. So use the latest official firmware found here: http://community.xim.tech/index.php?topic=49093.0

There is no need to use boost, steady aim or any of that other stuff. The curve alone fixes the deadzone issue.

I also want to mention that I use a large XL mousepad and controlled mouse movement. I don't play a whole lot of high mobility flankers like Genji/Tracer but I play a lot of hitscan like McCree and Soldier.

Much of what I said above has already been the Linear setup being suggested since the beginning but I wanted to make it more detailed so that people are using Linear PROPERLY and not writing it off immediately because they failed to set it up properly. If there is any setting I missed that you are confused about let me know.

what about Aim Smoothing?