XIM Community

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - smallstonefan

Pages: [1] 2 3
1
All I know is I've tried every COD for the last 8+ years (since my son started playing) and never enjoyed it.

I'm having an absolute bast playing MP with BO4. I've got my Xim dialed in and I've never been this competitive on Xbox.

So for me, it's a solid win.

2
Game Support / Re: COD BO4 ADS Delay?
« on: 06:21 PM - 10/14/18 »
For some reason that I can't yet explain, I prefer my settings using the ST for Black Ops 3. My mouse is at 3200 dpi.

Here is the profile using the Black Ops III (3) ST (NOT the new BO4 ST). This plays very well for me overall.

>>> XIM APEX [Black ops 4] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

3
Game Support / Re: Official black ops 4 settings
« on: 09:01 AM - 10/14/18 »
the official st out?

Yup, you can download it now. I copied my settings I was using for COD3. I hope that lazy way doesn't undo something in the new ST...

4
I have a similar problem with my BF4 profile - I can change the synchronize setting for Hip, but it is locked for ADS. My other profiles don't seem to have ADS locked...

5
No those are the sensitivities I am using. I am running a G502 at max DPI - I think that's 16,000 but I'd have to check at home to be sure...

6
Thanks - I'm going to have to wrap my head around this and experiment.

I do love to experiment... :)

PS: Looks like they shipped my T2 from China, so it won't happen soon...

j

7
I look forward to hearing your thoughts! I've hated this game due to the mechanics and poor frame rates, but I'm enjoying it now. I play with my son and a few online friends and now I'm contributing to our chicken dinners instead of operating as a pack mule... :)

8
Game Support / Re: PUBG Official ST discussion thread!
« on: 07:41 AM - 04/03/18 »
Wish this fkn game would come to PS4 god damit!!!!

If you're lucky us xbox guinea pigs are making it playable for you so you don't have to be a tester! :)

9
Thanks. I like the idea of the keyboard into the Titan Two so that I can map macros to keystrokes (num 1, num 2, etc.) instead of macros on xbox buttons. This seems more flexible. But if I do this, I could not use rapid fire or any macros on the mouse.

Do you know if the Xim will pass unmapped keyboard keystrokes through it to the Titan Two? In other words, if I have say Num 1 not mapped in the Xim to any Xbox buttons, will that keystroke show up to the Titan Two if the Apex is plugged into it?

10
About all that thread defines is what linear means - I meant more of how and where the translator, sensitivity, and curves all fit together.

First, the mouse input is multiplied by the sensitivity, then it goes through the ballistic curve function. The ST function is applied to it at the very end (it can be thought of as the inverse function of the look mechanic of the game).

There might be some function that smoothens the raw mouse input at the very beginning, but I'm not 100% sure about that.

Thanks. Based on this, there really could be a different in using the low sensitivity and the steep curve vs. no curve and high sensitivity. Especially at the very start of mouse movement...


11
hmm,,,,,,tested on BF4 test range..........didn't feel worse than my norm.......in fact on closer examination it fealt exactly the same......so now I'm thinking, is this because all ive actually done is turned up my sensitivity in the ballistics curve and then turned it down by the same amount in the manager...............which obviously equals the same.   
The only variable i can reckon regards something we used to consider about the xim4, and that you had better results the closer you could get your manager sensitivity to the value of 1 since that would introduce less interpolation, however im not sure if this is relevant to the Apex......curious

This is what I'm thinking as well, as I went from very high sens. like 280 down to 5 or 6. Depending on how the interpolation is applied, it could very well make a difference if you use a high sense flat curve vs a low sensitivity crazy curve.

Algebra is funny that way.

All I know is this is the best PubG experience I've had yet...

What sensitivity are you using on pubg with this curve?

Hip = 18.65
ADS = 19.70

Mouse and Xim at 1,000hz, currently aim acceleration at 2 but I'm experimenting with it...

12
hmm,,,,,,tested on BF4 test range..........didn't feel worse than my norm.......in fact on closer examination it fealt exactly the same......so now I'm thinking, is this because all ive actually done is turned up my sensitivity in the ballistics curve and then turned it down by the same amount in the manager...............which obviously equals the same.
Yes.

This is what I'm thinking as well, as I went from very high sens. like 280 down to 5 or 6. Depending on how the interpolation is applied, it could very well make a difference if you use a high sense flat curve vs a low sensitivity crazy curve.

Algebra is funny that way.
There's a thread in which the algebraic stuff is more or less explained: http://community.xim.tech/index.php?topic=55763.msg620842#msg620842

About all that thread defines is what linear means - I meant more of how and where the translator, sensitivity, and curves all fit together. Probably complicated and proprietary so I get it's not out there. I run a software company now but spent a lot of years coding, so that sort of stuff interests me... :)

13
hmm,,,,,,tested on BF4 test range..........didn't feel worse than my norm.......in fact on closer examination it fealt exactly the same......so now I'm thinking, is this because all ive actually done is turned up my sensitivity in the ballistics curve and then turned it down by the same amount in the manager...............which obviously equals the same.   
The only variable i can reckon regards something we used to consider about the xim4, and that you had better results the closer you could get your manager sensitivity to the value of 1 since that would introduce less interpolation, however im not sure if this is relevant to the Apex......curious

This is what I'm thinking as well, as I went from very high sens. like 280 down to 5 or 6. Depending on how the interpolation is applied, it could very well make a difference if you use a high sense flat curve vs a low sensitivity crazy curve.

Algebra is funny that way.

All I know is this is the best PubG experience I've had yet...

14
Hi All,

I want to use my Titan Two to create some one-buttton build macros for Fortnite. I'm not sure if they Apex passes keystrokes through it, in which case I would put the Titan Two after the Apex. If it does not, then I wonder if the mouse and keyboard (orbweaver) should go into the Titan Two, then the Titan Two into the Apex? In that way, the Titan Two would convert keystrokes to macros before hitting the Apex...

thanks!

james

15
I just tried this on Pubg and it's the best performance with the Xim I've had yet.

I wonder if this is like gain-staging in audio, where there are various points in the chain (mouse, Xim sensitivity, curves, ???) and this starts with the most sensitive part first, rather than factoring it in later...

james

Pages: [1] 2 3