XIM Community

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - isidrojose

Pages: [1] 2 3 4
1
Game Support / Re: My Rainbow Six: Siege Settings (Unique)
« on: 10:55 PM - 10/13/18 »
Been using this settings for almost 3 weeks now and it feels really great.. gonna stick on this until Llimit came up with a new one..
MOUSE IS STEELSERIES
ON 12000 DPI
500 polling
Hard mouse Pad


My setttings:
HIP:
NO
Using the curve
X/Y Ratio: 1.30

In game:

LDZ: 29 ( I've assigned a walk button to walk very slow and go to tights angles of peek)
REX:
VERTICAL: 100
HORIZONTAL: 100
ADS: 50

I should note that I'm a wrist player using a cloth mousepad, the curve may not be necessary for you if you're using a hard surface and you're used to having the faster glide of your mouse. Reading these settings look pretty decent on paper. I'm glad you tried NOT using the ADS and just lowering it in-game. Best of luck!

Yeah Man! I use wrist aiming too.. I love your curve man.. before I've used some curves then change to no curve settings then tried yours its feels very responsive and snappy.. thanks man

2
Game Support / Re: My Rainbow Six: Siege Settings (Unique)
« on: 12:21 PM - 10/13/18 »
Been using this settings for almost 3 weeks now and it feels really great.. gonna stick on this until Llimit came up with a new one..
MOUSE IS STEELSERIES
ON 12000 DPI
500 polling
Hard mouse Pad


My setttings:
HIP:
NO
Using the curve
X/Y Ratio: 1.30

In game:

LDZ: 29 ( I've assigned a walk button to walk very slow and go to tights angles of peek)
REX:
VERTICAL: 100
HORIZONTAL: 100
ADS: 50


3
Game Support / Re: My Rainbow Six: Siege Settings (Unique)
« on: 10:50 PM - 09/29/18 »
been using these for 5 days and so far all the settings I've tried these one is the best for me and sticking with it until he come up with a new one.. Thanks a lot mate definitely will subs to your channel..

4
Game Support / Re: My Rainbow Six: Siege Settings (Unique)
« on: 08:28 PM - 09/25/18 »
Tried the curve last night and loving it.. I wonder if i can use it on a 4K DPI..

5
XIM APEX Discussions / Re: Razer Synapse Use/Support
« on: 08:34 AM - 09/21/18 »
I am using a Razr Tartarus V2 on Xbox One, and I've had issues with ghosting and rollover since day 1. Mostly when sprinting in several games, it loses signal for a spit second even when toggled and my character abruptly stops moving forward.

Supposedly you can run Synapse and this will eliminate ghosting/rollover but that's when hooked up to PC. My Apex is plugged into my Xbox USB and then my Razr is plugged into the 3port. Any ideas/suggestion to somehow use Synapse using the Apex?

Using tartarus v2 never had an issue on rollovers and ghosting too..

6
Shared Configs / Re: Rainbow SIx Siege Settings [9/2]
« on: 06:19 AM - 09/20/18 »
>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:AAABiAMQBJgGIAeoCTAKuAxADcgPUBDYEmAT6BVwFvgYgBoIG5AdGB6gICghsCM4JMCmSCZIJkgmSCZIJkgmSCZJJkkmSSZJJkkmSSZJJkkmSSZJJkkmSSZKJkomSiZKJkomSqZK:X5BC
<<< XIM APEX END COPY <<<

With this I never get the red blink light. Feels good. Max speed 98%

I've sent you message mate, is this a ballistic curve? or full set up?

7
Hardware Compatbility / Massdrop CTRL Mech TKL
« on: 10:57 PM - 09/18/18 »
does anyone tried this keyboard? will this work on apex?

8


This thread contains settings for different aim styles.
Make sure you're running the latest firmware (20180402) which you can find here.
Flash Upgrade Instructions can be found on the same thread.
Remember, your Xim Apex has to run at 1000 Hz.





Hip
Sensitivity 132
Synchronize Off
Smoothing 1
Y/X Ratio 1


ADS
Sensitivity 93
Synchronize Off
Smoothing 1
Y/X Ratio 1


Curve used on HIP and ADS
Code: [Select]
>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:AAAA0gGjAnUDRgQYBOkFuwaMB14IL4kBC+sO1RG+FKiXkhmTm5Mc+B5cH8GhJSIhIx6kGiSyJUkl4SZ4pxAnECcQJxAnECcQJxAnECcQJxAnECcQJxAnECcQJxAnECcQJxAnECcQ:X5BC
<<< XIM APEX END COPY <<<




Normal settings (easy to control)

Hip
Sensitivity 228
Synchronize Off
Smoothing 4
Y/X Ratio 1


ADS
Sensitivity 152
Synchronize Off
Smoothing 4
Y/X Ratio 1


Curve used on HIP and ADS (different curve)
Code: [Select]
>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:AAAA3gG9ApsDeQRYBTYGFAbzh9EJhAs3DOqOnQ9hECQQ6BGrEm8TMxP2FLoVfRZBFwUXyBiMGU8aExrXG5ocXh0hHeUeqB9sIDAg8yG3InojPiQCJMUliSZMpxAnECcQJxAnECcQ:X5BC
<<< XIM APEX END COPY <<<


Super fast (hard to control) (different curve)
Hip
Sensitivity 378
Synchronize Off
Smoothing 11
Y/X Ratio 1


ADS
Sensitivity 302
Synchronize Off
Smoothing 11
Y/X Ratio 1


Curve used on HIP and ADS (different curve)
Code: [Select]
>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:AAAAvgF8AjkC9wO1BHMFMIXuBuEH04jGif4LdgzvDmcP3xFYktAUNZWZFuUYMJl8Go+bohyoHa+etZ92IAOgkKEWoZCh9SJbIsKjKCN1I8IkDyRcJKkk9iVCJY8l3CYpJnYmwycQ:X5BC
<<< XIM APEX END COPY <<<




Vertical Sensitivity 100
Horizontal Sensitivity 100
Left Stick Dead Zone (%) 29 (based on skimwOw's slow walking)
Right Stick Dead Zone (%) 10





My preference for hardware, other people might prefer other mouses and keyboards.

Logitech g502 -- 12.000 DPI and 1000 HZ
I don't think a specific keyboard matters.

If you don't have a 12.000 dpi mouse calculate your new DPI http://www.csgosetup.com/dpi-calculator/

Replace the value "93" with the sensitivity you want to change. The value under the tool will be the new sensitivity, input this in your Xim Settings


Hi Justh1n

I have tried all of your settings but its laggy, there is a little delay when we stop moving mouse physically and when aim stops on screen. If on the same settings i play Terrorist Hunt, aiming seems to be very responsive and gives you a feel of tight aiming. How can we achieve it in Multiplayer too?

My settings are 12000dpi, 1000Hz, Apex firmware is 20180501.

try these..
https://www.youtube.com/watch?v=pCMOsjaX5Jg

9
Game Support / Re: HELP STEEL SERIES RIVAL 600 RAINBOW 6
« on: 04:09 PM - 08/24/18 »
Using rival 600 i have settings for 12k DPI and 4K DPI.

10
Hardware Compatbility / Re: Steelseries QCK Prism
« on: 01:48 PM - 08/20/18 »
I would try calibration on the hard pad first (holding down CPI button, until the lights flash white), and then adjusting the lift off to be a little higher in SteelSeries Engine
How much lift off? Any idea??

11
Hardware Compatbility / Steelseries QCK Prism
« on: 08:42 AM - 08/20/18 »
Anyone knows how to use the hard pad side.. tried it and my mouse never moves but on the cloth pad it's working.. does anyone knows how to use this hard pad?

12
Game Support / Re: Rainbow six sensitivity
« on: 11:51 PM - 07/24/18 »
Currently Running on this settings:

In Game:
H:100
V:100
ADS:100
LDZ:29
RDZ:10

MOUSE: SteelSeries Rival 600
4000 DPI
500 HZ

XIM APEX:500 HZ

HIP:55
Common
Smoothing:3
Y/X: 1.00

ADS:50
Common
Smoothing:5
Y/X: 1.25

NO Curves for HIP and ADS

for the mousepad I use SteelSeries QCK Prism the cloth side, I will give full review for this mousepad after a week or 2, as of right now I'm loving this pads because its dual sided.


13
Game Support / Re: Rainbow six sensitivity
« on: 10:33 PM - 07/19/18 »
Did about 2 plus hours of terrorist hunt last night and tweeked my settings some. Came up with

ADS
Sensitivity: 7
No curve
Common sync
Xy: 1.6 (great for recoil and quick adjustments up and down depending on a crouching or standing target

Hip
Sensitivity: 30
Everything else the same.

In game setting I set vertical to 65 and left stuck dz to 27 for slow walking. Everything else is set at the recommended settings

Note mouse is still 4000 dpi 500 polling rate.

Why 65 Vertical? I will try today and give you my feedback thanks

14
Shared Configs / Re: Rainbow SIx Siege Settings [7/4]
« on: 03:00 PM - 07/18/18 »
I was wondering if I could get some help. I'm getting back into Rainbow on the XBOX platform. I've had my Xim Apex since it came out and had the Xim4 prior. However, I'm a little confused on some of these settings everyone is referring too. This is what I play with.

Logitech G903
12,000 DPI
Cloth and hard pad
DPI varies depending on game
Razer Elite Orbweaver Chroma
smoothing rate at 7
Sensitivity at 200
ADS At 175

Now, these rates were for playing ghost recon ghost war. I'm starting to get back into rainbow. I saw someone talking about binding keys and being able to lean in game. So I came to the forum and found more things that would be interesting. I'd really appreciate it if someone could help a noob?

My settings are:

4000 DPI 500hz mouse and
hip 55
Common
5 smoothing
Y/x is 1.00
No curve
ADS 58
Default
5 smoothing
Y/X is 1.25
No curve


For in game:
100 vertical
100 horizontal
100 ADS
29 left dead zone (for slow walking if you have walk button assign)
10 right dead zone

15
Game Support / Re: Rainbow six sensitivity
« on: 02:26 PM - 07/16/18 »
Haha well Iím pretty happy with the settings now. Now itíll just take time to get some memory, probably a month or so. It does take time to get use to the wasd movement. Can be clunky at times when compared to a joystick.
If  you are on ps4 eu server my squad is playing now. You want to join

Pages: [1] 2 3 4