XIM Community

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Brust Free

Pages: [1] 2
1
Hi
What's the best config for Tracer ?
I tried Linear Ramp recently, tracking is ok but turning speed is quite slow even if I increase the hip number ... i really like to see GM players config .
I really need one .

2
Game Support / Re: Post your Overwatch Settings
« on: 05:48 AM - 06/22/17 »
I have found Tracer so much more usable since moving to Linear with the Console Crossover profile. I have turned my G502 down to 2k like suggested and was skeptical about it. It does seem improved to me as well though. I have my sensitivity up around 110 or so. 4875 or so on the boost (xbox). I can turn around much quicker than I used to be able to with exponential, and because the input is so much more precise and responsive than exponential, I can use tiny movements to move in small and precise ways. It's not -perfect-, but dare I say it is almost PC-like.
With curve or without it ? I mean do use Boost and Curve 8.5 at the same time ?

3
Game Support / Re: Post your Overwatch Settings
« on: 06:20 PM - 06/21/17 »
My current settings updated.

Destroying with soldier, tracer, widow and mccree. This setup requires u aim with the arm and do small adjustments with the wrist, as well as a big mouse pad/space.

In game sensitivity and relative aim all at 100% as expected.
Aim assist: 100
Aim smoothing: 0
Aim assist window size: 20 (increased from 0%)

Mouse dpi: 12k g502 1000hz

Xim hip sensitivity: 14 (was 13.15 but was to slow for tracer.)
Xim ads sensitivity: 5.74 (separated config)(41% of hip)

Y/X Ratio: 1.5 (still trying to fine tune this).

No boost.
No steady aim.

My Curve for hip and ads with Linear Ramp starts at 8.5.

>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1ERslLzlDTVdha3V/iZOdp7G7xcjI:X4MB
<<< XIM4 END PASTE

I tried your config and I really loved it ! Thanks for sharing it my friend, really appreciated. It's really feels good to play with this new setting...
but there's one problem... turning speed is a little slow ... it's fine for Widowmaker / Soldier , but not the best for Tracer ... any suggestion?

4
Game Support / Re: OVERWATCH Linear Fix
« on: 12:40 PM - 06/19/17 »
So MAJOR thanks to Gunit2004 and humanfemale for helping crack this mystery.
To keep it short we've all noticed that the Linear ramp on Overwatch doesn't kick in right away. Obviously the deadzone is broken, they set it too far away from 0. Luckily our friends here figured out that you can use the Xim to makeup that deadzone and then you have an amazing setting!

1) Copy your buttons from your current profile
2) Create a new CONSOLE CROSSOVER STnot overwatch Profile
3) Paste your buttons
4) Load up a practice skirmish; Linear Ramp; 0 Aim Smoothing; 100% Ingame Sens

CURVE MODE:
-Now start at the lowest part of your curve. Start kicking it up until you can SMOOTHLY move your mouse at a very slow speed (it will start choppy but as you move that number up you'll notice it'll smooth out and speed up, for me that was 12, for humanfemale it was 8 ) it seems to depend on your console, and mouse
-Now add as much to the top of the curve as you did to the bottom.You're trying to maintain that 45 degree slope.
-Now you can mess was sensitivity. No need for a boost. I have Steady Aim on but.... oh and 1.5 Y/X

UPDATED: BOOST MODE: (recommended) (SA3)
-No Curve, Put your boost to 5000 and then start slowly lowering the numbers by 5 until the micro-movements are smooth right before they cut out

EXTRA: Widow/Ana Zoom 41%, Aim Assist Window 5, Aim Assist 20

I didn't paste my curve in here because I think you should try to figured out your own. There really is no curve it's just adjusting the straight line for the deadzone. Too bad you can't just raise the whole curve line with one slider though this would literally be the ONLY application for that.

XBOX: (STARTS at +12 - May need .5 adjustment to taste/equipment)

>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1GCIsNkBKVF5ocnyGkJqkrrjCyMjI:X4MB
<<< XIM4 END PASTE <<<

PS4: (STARTS at +8.5 - May need .5 adjustment to taste/equipment)

>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1ERslLzlDTVdha3V/iZOdp7G7xcjI:X4MB
<<< XIM4 END PASTE <<<


Enjoy and Report Back


Hi
What do you mean by " CONSOLE CROSSOVER ST not overwatch profile " exactly ?
Thanks

5
Not unless you can write an AHK script and play while connected to a PC via XIM4's SandhawC app. Does overwatch have a quick turn button? If not you could use turn assist or bind the left and right analog stick directions to keys. Both of these can be found in the advanced settings of your config.

What's AHK Script or " play while connected to a PC via XIM4's SandhawC app " ?? Can you explain more ?

6
*UPDATE*

Sorry for the short breaktime of my side.
I was really dissapointed of some peoples in this forum.

I gonna share the new config later when im home but i dont guarantee any increased support for other settings or other DPIs. In the past it made me alot of work and as you saw i not really had positive experience with it.

Note: Ive stopped playing widow only - now im playing Sombra only and i will release a Sombra Config in the next few weeks.

Thanks for your understanding and thanks to all who have supported me in the past.

Greets

Thanks, much appreciated

7
*UPDATE*

Ive just created a new config a few days ago and hell its working crazy im able to reach above 80% accuracy every 2-3 Games! Its a pure domination config and im thinking about to share it or not right now.

You think now maybe what why? Well guys i not really get positive support of you for my work. My config was meant to be shared with everyone to get better. But some people really scold me cause its not working for them and they wish i do a special new settings for them.

This is sad and is not really motivating me to share more of my awesome experience with the best character in overwatch. For example - i uploaded cplw1dow 2.0 for you guys with a video tutorial so everyone understands it.
I get 700 Views but only 20 Subs and 3 Likes where the hell is the gratitude of everyone?

I mean i dont care to get subs or not but something like a thanks or a like for the video would support my work.
But there is nothing so ive decided not to share my next generation cplw1dow im sure you understand my actual statement.

Thanks for reading see you maybe ingame ;-)

Greets
izzy

Dude , do you wanna know why people don't appreciate your jobs ?
Because nobody wants to showing off their identity as a cheater ( Xim 4 ) player.
Take a look at your video at " Ximgameplay " channel. You got 55 dislike even therefore you're #1 widow at ranking system. People never respected Xim users at all ,  Some people tell to their friends that i have xim and some people don't! And cuz everyone can see their YouTube activities, they try to not show up at your videos !

8
The only thing that I missed from cplw1dow 1.0 and I'm looking for it :

the accuracy is straight on around 50-60% what is really impressive if you check the overall Widow Accuracy in the world. (38%)

9
you change the polling rate as written in the manual (some buttons you need to press and hold down while plugging it to the pc)

as for the config, make sure to copy everything including the firmware you need for that config and set experimental ramp mode in the ingame settings
if that doesnt work for you then it might just be that you do not like the config as your personal playing preferences are different :) (eg faster mouse speed and such things)

Yes everything is correct but still having issue with this config ...
Other heros like Mccree and soldier are okey ... but Widowmaker isn't good as it used to be .
I loved cplw1dow 1.0 coz it was perfect for long range and a strong aim assist ...
with Zowie FK2 it's alot easier to do reflex headshots or flick shots but it's not so good for long range shots...
I'm investigating near 2 weeks for the best Widowmaker conditions but nothing found yet .

I wonder, does anybody else has the same problem ?

10
OMG !!! After getting a Zowie it still doesn't work for me like cplw1dow 1.0
I'm so mad ... or there's something that I missed, idk .

11
I bought a Zowie fk2 , anyone know how csn i change my HZ settings ?

12
I bought a Zowie fk2 ... i hope this config working on it . Couldn't deal with G502 and new aiming system anymore ...
Anyway , kojsdojo can you explain why you prefer Zowie over G502 ?
Thanks

Because shes lighter and feels better in the hands the sensor seems to be also better and no drivers needed to setup anything ;)


Greets

Yeah that's why I bought a zowie mouse too (ec2-a model) this Config works well with the zowie ec2 mouse too.

Kojsdojo Can you recommend this config also for MCcree or all other heroes? do you play other heroes with this config?

Yes i play it also with other characters but im working on a crazy hip config for soldier, mcCree, Mei and genji ;)

Greets
That would be awesome, if you made it , I really appreciate if you share it with others

13
I bought a Zowie fk2 ... i hope this config working on it . Couldn't deal with G502 and new aiming system anymore ...
Anyway , kojsdojo can you explain why you prefer Zowie over G502 ?
Thanks

14
It's not working on G502 ... i know you don't use this mice anymore but PLZ do some tests and let us know how it should work ... my main character is Widowmaker with 100+ hour but now I can' do nothing .
Thank you

How i want to make perfect settings for you?
Everyone got a own feeling and different Equipment.

What Mousepad do u have Cloth or Plastique?
You should just look whats your best sensitivity dont play on my sens cause the chance u have the same feeling on the mouse is like 0.1%

Hope i help you with this.

greets

The reason I'm consisting on test G502 is :
1 ) I'm new to Xim 4 and I don't know much about bllistics , curves , boost etc.
2 ) your old config perfectly worked for me ( I could get 50 crits with it )
3 ) yes sure ! Everyone have their own way and i just increasesd number of hip and ads as well but nothing more !
4 ) I tried this new setting in your video with the same dpi and bllistics and ... but it's still doesn't working ...
5 ) i tried to fix this issue but unfortunately I couldn't...

Kojsdojo , that's why i need your help . I don't really care about equipments so much ( my mice pad is plastic by the way ) ok ... you're busy but please please please release G502's version of this config . Not just for me alone ! There's alot of people use G502 so please help us dede , thanks

This just screams entitled. He should also release configs for every other popular mouse too with variations on cloth, plastic and $30+ dollar mousepads too shouldn't he. I'm still fairly new to XIM and its really straightforward in terms of adjusting it to your liking and what you don't understand there is many explanations for on this forum.

Try his settings with 12k DPI and 7.06 HIP 3.56 ADS. Logitech G502 mice seem to work better at higher DPI. I was getting a suprising ~50% accuracy on my shots that I've never got before using these settings.

1 ) ahhhhhhh first i'm talking to him not to you ! My " average accuracy " was 60-70 and my " average critical hits " was 20 before this FKing new update , i also tried your config but it wasn't even close to the cplw1dow 1.0 ! I'm trying so hard to reach to a config same as cplw1dow but I can't!!!!!

2 ) Kojsdojo knows how Widowmaker aiming system working at best conditions in Xim 4 better than anymone else . And also he's the one who created cplw1dow!
3 ) I really really really appreciate Kojsdojo for making this config and also a special thanks for sharing it with others but most of the people use G502 than Zowie ... i know man , i know it's unreasonable to find a config on G502 as well but all of the users of " cplw1dow 1.0 config " were using G502 or bought this mice for your config ( including me ! )  to play Widowmaker at the best condition .
4 ) i didn't asked you to find a perfect config for " Me " I don't care about mousepad or anything else . I also changed cplw1dow 1.0 so much to get my best config . I'm just like alot of other people are asking to make cplw1dow 2.0 for G502 too . I'll wait for it if it even takes 2-3 weeks but just help to solve this problem .
5 ) sorry if I'm acting so violently , coz I'm sooooooooo mad at this new aim system and my main character becomes so useless anymore ! With widow you must be perfect or you're useless.

Ok look its simple - Even when i put back my G502 it will take time to get the right settings for myself.
Because im trying out several hips and ADS configs.
But why i want to play several days with a bad mouse when i got my ZOWIE?

Is it my deal that u cant find your own settings? I mean seriously i like to help everyone of you guys but in some point have to be a limit.

Im playing now on 3200 DPI whats your DPI just calculate it by your DPI and you got  the same settings as me! Or simply make your G502 onto 3200 DPI. Ive played with the g502 on 2400 DPI and setted up the cplw1dow config based on this Mouse DPI.

Now i changed only a few things - Curve, boost, hip, ADS and ofcourse Mouse :)
I think 99% of all peoples who are using my config have to change the hip and ads to their prefferations.

In fact that today was Battlefield 1 released i anyway wont play much Overwatch in the next few weeks i think.

Alright then , cplw1dow 2.0 is better than cplw1dow 1.0 ? Or they're similar or idk ... just tell about it more thanks

15
It's not working on G502 ... i know you don't use this mice anymore but PLZ do some tests and let us know how it should work ... my main character is Widowmaker with 100+ hour but now I can' do nothing .
Thank you

How i want to make perfect settings for you?
Everyone got a own feeling and different Equipment.

What Mousepad do u have Cloth or Plastique?
You should just look whats your best sensitivity dont play on my sens cause the chance u have the same feeling on the mouse is like 0.1%

Hope i help you with this.

greets

The reason I'm consisting on test G502 is :
1 ) I'm new to Xim 4 and I don't know much about bllistics , curves , boost etc.
2 ) your old config perfectly worked for me ( I could get 50 crits with it )
3 ) yes sure ! Everyone have their own way and i just increasesd number of hip and ads as well but nothing more !
4 ) I tried this new setting in your video with the same dpi and bllistics and ... but it's still doesn't working ...
5 ) i tried to fix this issue but unfortunately I couldn't...

Kojsdojo , that's why i need your help . I don't really care about equipments so much ( my mice pad is plastic by the way ) ok ... you're busy but please please please release G502's version of this config . Not just for me alone ! There's alot of people use G502 so please help us dede , thanks

This just screams entitled. He should also release configs for every other popular mouse too with variations on cloth, plastic and $30+ dollar mousepads too shouldn't he. I'm still fairly new to XIM and its really straightforward in terms of adjusting it to your liking and what you don't understand there is many explanations for on this forum.

Try his settings with 12k DPI and 7.06 HIP 3.56 ADS. Logitech G502 mice seem to work better at higher DPI. I was getting a suprising ~50% accuracy on my shots that I've never got before using these settings.

1 ) ahhhhhhh first i'm talking to him not to you ! My " average accuracy " was 60-70 and my " average critical hits " was 20 before this FKing new update , i also tried your config but it wasn't even close to the cplw1dow 1.0 ! I'm trying so hard to reach to a config same as cplw1dow but I can't!!!!!

2 ) Kojsdojo knows how Widowmaker aiming system working at best conditions in Xim 4 better than anymone else . And also he's the one who created cplw1dow!
3 ) I really really really appreciate Kojsdojo for making this config and also a special thanks for sharing it with others but most of the people use G502 than Zowie ... i know man , i know it's unreasonable to find a config on G502 as well but all of the users of " cplw1dow 1.0 config " were using G502 or bought this mice for your config ( including me ! )  to play Widowmaker at the best condition .
4 ) i didn't asked you to find a perfect config for " Me " I don't care about mousepad or anything else . I also changed cplw1dow 1.0 so much to get my best config . I'm just like alot of other people are asking to make cplw1dow 2.0 for G502 too . I'll wait for it if it even takes 2-3 weeks but just help to solve this problem .
5 ) sorry if I'm acting so violently , coz I'm sooooooooo mad at this new aim system and my main character becomes so useless anymore ! With widow you must be perfect or you're useless.

Pages: [1] 2
Admin