XIM Community

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Schrotthi

Pages: [1] 2
1
PSN: Schrotthi
BF1 + Alienation - ist zwar kein Spiel für Maus/Tastatur, aber bin gerne bei ner Runde Archenschiff dabei ;-)

2
XIM 4 Discussions / Re: ballistic curve for low sens
« on: 04:02 AM - 12/12/16 »
Best ballistic curve for low sens is the default curve (linear).

3
Deutsch / Re: PS4 Pro Lüfter
« on: 05:05 AM - 12/09/16 »
Bei mir ist die Pro leiser als die normale PS4. Auch nach längeren BF1 zocken.
Sitze direkt neben der Playsi.

Auffällig laut ist allerdings das CD-Laufwerk. Das wird aber zum Glück ja auch nur beim Spielstart groß genutzt.

Insgesamt super zufrieden mit der Pro. Vorallem im Zusammenhang mit der SSD ^^

4
Hallo Zusammen,

hier ein kleines Review von mir, zu meinen ersten Spieleindrücke zur PS4 Pro bei BF1.

- Xim4 funktioniert wunderbar mit dem neuen Pro-Controller und der neusten Beta-Firmware.

- Die Ladezeiten mit der SSD bei BF1 sind noch mal ein sehr fühlbares Stück kürzer wie bei der normalen PS4 + SSD. Wie viel Sekunden das sind, kann ich leider nicht sagen.

- zur Grafik, gespielt auf FullHD - Monitor: Bei BF1 ist es ja so, dass im Vergleich zur Beta, die Grafik ordentlich hochgeschraubt wurde. Reicht die Leistung der PS4 für diese Grafik nicht aus, wird die Auflösung und Details dynamisch zurückgeregelt. Jeder der BF1 spielt weiß, dass dies relativ häufig passiert. Hier kommt die PS4 Pro zum Einsatz: Diese Grafikeinbrüche sind mir gestern beim Spielen gar nicht, oder nur minimalst auf gefallen! Alles lief super flüssig. Die Grafik war durchgehend so, wie wenn man mit der normalen PS4 statisch auf eine nicht bewegende Umgebung sieht.
Dies hat im allgemeinen zur Folge, dass man schon das Gefühl hat die Grafik ist besser.

Inwiefern die Pro bei z.B. COD IW (welches echt unterirdisch ist) punktet muss ich erst sehen, da ja die "Grafikpracht" bei IW eh nicht mit BF1 zu vergleichen ist :-)

Ob dies nun die Mehrkosten von ca 200€ (wenn man die alte verkauft) rechtfertigt, weiß ich nicht und muss jeder selber wissen.

Ich bin jedenfalls sehr zufrieden vom Ersteindruck und würde die Pro empfehlen.

Ich hoffe ich konnte manchen weiterhelfen.

Gruß
Schrotthi

PS: ich hab mittlerweise ca. 15 Xim4 Spieler in der FL und wir spielen hauptsächlich COD und mittlerweile viele auch BF1. Wenn jemand Lust hat gerne adden.

6
PSN: Schrotthi
Game: COD BO3 only

Gruß aus Bayern!

7
XIM 4 Discussions / Re: HIP vs ADS Sensitivity Ratio
« on: 05:23 AM - 02/28/16 »
Hi,

nice post, I am searching such a discussion for long time. Only a few people know that the real progamers on PC are playing without any mouse accelleration! So.. the default balistic curve is the right one. I dont understand how people can play with some strange curves.. ^^

The further question is.. how to configure the ADS sensivity, which is the best for the muscle memory. I dont know....

What do you mean?

In games on PC like Counterstrike.. there is no ADS...

Game: COD Black Ops 3; actual KD: 2.36 still rising
DPI: 5600 Razer Naga 2010 Polling 1000
Xim HIP: 9.00
Xim ADS: 6.25
ratio: 1.44
Balistic curve: default linear

Measurements:
HIP: 360°/42.6cm
ADS: 360°/57.6cm
ratio: 1.35 (due to the different translators on hip/ads you cant compare it)

Sry, I dont understand, why some countries/guys still using the non-metric system like "inch" ;-)


8
Thanks for your quick answer!

I've meant the PC-version of CS. There the Pro-gamers always play withour acceleration.

Nevertheless, I changed the curve to the default linear curve. I've configured it in HIP to do a 300° turn when I move the mouse 32 cm (my Mousepad). This is the best for me I think.

After playing with that for some time I readjust my reaction very quickly. Now the aiming is awesome!! Thanks!

But than I don't understand the lot of posts of different curves for egoshooters when the default one is the best. And some curves are very strange ^^

9
Hello together,

first sry for bad english...

A few years ago... Before I bought PS4 and XIM 4, I've played Counterstrike 1.4-1.6, Source a lot. I was even high-skilled.
Nevertheless the Windows mouse-acceleration was aktiv and therefore ingame in CS too.

This is the reasen why I've configured a quadratic balistic curve in the XIM 4 Manager. With this configuration the feeling is like the same in CS as I remember...
I'm playing quite good with this configuration (Global K/D 2.2 still rising, 19k kills/7k deaths).

I know that the real pro-gamers in Counterstrike playing with NO mouse acceleration.
I have no experience with that feeling.

Does I have the same feeling in COD with XIM 4 (compared to CS without mouse acceleration) when I set the standard linear curve (or any linear curve) ?

I've tested it. And yes, the Mouse and Aim acceleration is proportional. But... with that configuration I have some problems. Shooting at far distance it is too sensitive and for quick 180° turns it is too slow..

What's your opinion/experiance ??

Thanks in advance!

10
Under "Advanced". Where "Ballistics" is, there are 2 arrows. One arrow to the left, and one to the right . They increase the X value by 5. Right below the curve, the "+" and "-" increase x values by 0.5.

The Y/X ratio increases by 0.1

Then we have boost, which we leave at 0 ?

With the arrows you go through the x-values. With +- you can adjust the y-value. Thats all, so you can design every ballistic curve.. Click at my previous posted link, there you can see the shape of my curve.

The y/x ratio is the ratio y/x ;-) If it is 1.0 the vertical and horizontal movement speed is the same.

I never use boost..

11
Hi schrotthi,

How do you input those numbers and where? Do you use a smartphone or a pc ?  How do you make a ballistic curve into a quadratic one?

I would really appreciate if you post a step by step instructions. Thank you very much in advance.
Also, why 4000 DPI instead of max DPI? What is the max DPI on your mouse?

I put my DPI to the max...8200 and in game look sensitivities to the max. At least this is what Xim manual recommends.#

Hi noregretd,

I think that's the wrong post for this, nevertheless...

I always use the smartphone. Just klick on "Advanced" there you can adjust your curve manually with the given buttons. I used that webside https://05ddc01dc59366e39e7814b8ed266a7ea1554b8e.googledrive.com/host/0B8EFYcEZMa4deTNOUjM2OTlKTVU/xim4ballisticscurvetool.html just to show you my ballistic curve.
You can klick on "(Click to load the curve)" of my previous post. The raw values are the values which i set up on the app. (on the 1st link the raw value[1] should be 1 not 0, my fault)

The max dpi of Razer Naga is 5600. I use it @ 4000 because my sensitivity is already quiet low 25/13. When i put it on max I have to lower that value. I think it is strong depending on the type of mouse.

I never use a scope on a rifle. Just the standard.

I can't understand such a high value 100 on hip (but it is depending on your mouse). With the quadratic curve on HIP and ADS the feeling is quiet the same.

Of course.. nobody is shooting on HIP, but if you are aiming to an enemy the "half" way until the crosshair is on the enemy is in HIP than ADS. Thats one process.
The advantage of the quadratic curve is, because on slight acceleration of mouse the aiming is really accurate and on fast acceleration your character will turn fast. This is like in every PC-shooter.. in my opinion...

I've tried the ST of Titanfall. It is good but in my opinion COD AW is better.

12
I have tried a few STs and also found COD AW to be the best one. Raizer Taipan (I like it better than my G502)  mouse at 8200 DPI, 1000 Polling. My sensitivities are HIP 100, ADS 20. Also, I found that Titanfall ST for XBOX ONE works well for this game as well.

What kind of mouse, DPI and HIP and ADS sensitivities are you using? Are you using any curves? if yes, what are your settings? I have not messed around with curves. What scopes are you using in-game?

I forgot to mention. I use only 1X scope and I never fire from the HIP (that is why I keep ADS at low 20).

I don't think that they will make an ST for this game. However, Planetside 2 plays acceptable with my settings. Not as good as COD AW or TItanfall though. Also, a lot of their "official" STs for other games are way worse than using COD AW   ST for Planetside 2. For example, Destiny is worse with it's "official" ST, Wolfestein The New Order is almost unplayable with XIM 4. 


Hi noregretd,

thanks, I will test titanfall for xbox one
I'm playing with Razer Naga 2012 @ 4000 dpi; Polling rate 1000
Sensitivity:
Hip 25.05
ADS 13.65

I use a quadratic curve as ballistic in hip and ads. Another curve makes no sense to me. I've played Counterstrike 1.4-1.6, CSS for years in ESL and I think a quadratic curve like f=x² get closest to that feeling.

HIP:
Code: [Select]
>>> XIM4 START Paste >>>
X4MB:0000040A121C28364C6A8AA8C8C8C8C8C8C8C8C8C8
<<< XIM4 END   Paste <<<

(Click to load the curve)


ADS
Code: [Select]
>>> XIM4 START Paste >>>
X4MB:000204080E1624364E667E96AEC8C8C8C8C8C8C8C8
<<< XIM4 END   Paste <<<

(Click to load the curve)

Hopefully the links are working...
I use similar curves in all games.
if you are playing at 8200 dpi, I think you have to adjust the sensitivity, also depending on your mouse...

I dont know what you mean with scope.

The COD AW ST is working quiet good for infantry and vehicles. With aircrafts I allways messed up... ;-)

Nevertheless, there is still a little nerving juddering.

Hopefully there will be a official "as good as possible" ST for Planetside 2 soon.. :-(


13
Game Support / Re: Planetside 2 configuration?
« on: 08:49 AM - 10/01/15 »
I've also tried Watchdog ST, it is ok.. but I think COD AW ST ist much better.

I use a quadratic ballistic curve on 4000 dpi.

But it is not totally smooth...

Hopefully there will be a better solution soon  :(

14
I've tested a lot of different STs.
Watchdog ST is ok, but I figured out that the COD AW ST is working quite better. Good enough to play the game with xim4.. but still not totally smooth.

Somebody figgured out a better ST?

There are any news about a official ST for Planetside 2???

15
Hello all,

Im playing Planetside2 with a changed COD AW config, cause there is no config for Planedside 2

Im playing with
Razer Naga 2012 4000dpi polling rate 1000
Ballistic: quadratic curve

in COD everything working very smooth. But in Planetside 2 there is like a threshold on small movements of mouse. but the ballistic curve is starting at 0.

Anyone have same problem or a solution?

Thanks

Pages: [1] 2