XIM Community

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - DEMENT

Pages: [1] 2 3
General Discussion / Re: New XIM product reveal?
« on: 01:17 PM - 07/30/21 »
Hopefully it is a device with a screen that makes it easier to calibrate or customize your profiles and can connect/sync to your xim apex.

Game Support / RUST St Settings?
« on: 05:52 PM - 06/06/21 »
It is out now, but I'd like to ask the community what deadzone in game do you guys use also in-game settings overall?

Trying the rust config ATM the Titanfall 2 config seems to be better but to get rid of the ~~~~ I set sync to commons and in-game deadline to 12 and 7 seems to kill the wiggle

Any chance you could post your config code and in-game settings?

Playstation / Re: Rust Console Beta (PS4)
« on: 06:13 AM - 06/06/21 »
Hello Xim community

So I've been playing Rust on console for about a week now. I'm on PS4. I figured there isn't going to be a new config out for the game until it's actually released. I've used a few different profiles of different games just to see which one works best. I started off with Cyberpunks config and that didn't feel right. Then I figured Ark is a survival game, let's try that. Arks profile doesn't have an ADS option so it make movement and ADS for rust a bit slow no matter how high the settings were.

Then I used the Vigor profile and that seems to work the best. I set the movement to 15.5 and ADS to 17.50

There's a lot of different in game options and settings I changed as well but I forgot what they were and I'm currently at work. I'll update this post once I get home. The game currently only has preset button maps that really suck so I know the adjustments I made work well for my play style.

I decided to use this Vigor profile, used in game sensitivity all the way up, and reduced dead zone to 15%.

Seems to be alright, best I could find. Both ads and hip are at 15.0

Kinda wana try other st, like Hz1z, fallout, or something that kinda feels similar to rust.

Game Support / Re: COD Cold War Advanced Setup 12/22/20
« on: 02:51 AM - 01/28/21 »
Played a lot more around with your setup in non-linear
120 fov
Independent ads
16k dpi on mouse
1000hz on both xim and mouse.

I really enjoy this setup a lot, I always find my self using your curves a lot with a bit of your settings but mixed up.

Code: [Select]
>> XIM APEX [RML - Cold War (Linear)] START COPY >>>

Game Support / Re: COD Cold War Advanced Setup 12/22/20
« on: 10:56 AM - 01/13/21 »
I give this setup a 8/10.

Before I go too far in my review, I'm on a PS4 which may be a major impact in different experiences between you and me.

It feels amazing af, but I feel kinda accelerated too much when turning left or right (could be just me). Caused me to miss my target a lot with AA off, but with AA on, I was much more accurate as it would stop me from over turning. (Even changing dpi from 16k-20k) should note that I play on 120 FOV, and I can't go back under that FOV, it feels way too weird going under 120 once you have played with it enough. But your settings do have their pros I very much love

In the end, I went back to using the regular Cold War st w/ no curves and no AA.
4k DPI with slight changes to the x/y dead zone. This setting worked best for me.

General Discussion / Will there be a new Xim? (Xim Apex2)
« on: 05:32 PM - 09/02/20 »
Hoping for a new model of the XIM Apex as next is rolling out fairly soon. Hoping that maybe the next build will be must better quality also or some major improvement of compatibility

Here is a video I put together while streaming earlier, using some basic st settings. (scroll down)

Call of Duty Modern Warfare Xim Setup that I use.

- Infinite Warfare ST/Profile

- Mouse Settings: G502 Mouse, 12k DPI, 1000hz Polling Rate.

- In-game Settings: Max Stick Sensitivity, 0.68 ADS Sensitivity, Aim Assist Standard.

- Xim Apex Polling: 1000hz

-HIP Settings-
Sensitivity: 47
Sync: Off
Smoothing: 0
X/Y: 1.00
Steady Aim: 0
Boost: 0

-Aim Down Sight Settings-
Sensitivity: 32
Sync: Off
Smoothing: 0
X/Y: 1.00
Steady Aim: 0
Boost: 0

/Curves Below/ (HIP ONLY)

Xim Apex HIP Ballistic Curve:
Code: [Select]
>>> XIM APEX [Translate Ballistics] START COPY >>>

I do not use a curve for ADS fyi.

I would consider this setup to be about 80%-90% Perfect, Im sure I could get better results instantly with my Xim Apex, but it is really fluid and feels much nicer using native support.

Mouse: G502
DPI: 150
Polling Rate: 1000hz

In-game Settings

Mouse Sensitivity: 6.00

Aim Down Sight Mouse Sensitivity: Relative
- Advanced Settings For Aim Down Sight Mouse Sensitivity
- ADS Sens. Multiplier (Rifleman Scopes): 0.48
- ADS Sens. Multiplier (Marksman Scopes): 0.48
- ADS Sensitivity Transition Timing: Gradual

Mouse Smoothing: Disabled

Note: If you come up with something much smoother, perfect, let me know.

Game Support / Re: COD MW (beta and release)
« on: 07:01 PM - 09/12/19 »
Doesn't the game have native support for mouse and keyboard?

It has but the Alpha didn't have any settings for mouse and you couldn't change the buttons lat-out at all. I don't expect it this time either.

What settings are your mouse set for, I really wana go native, but it doesnt seem to work the way i want to.

Has a fair amount of customization in the beta. Not using the APEX at the  moment.  Native support is working quite nicely. Seeing 2-3 m/k per loobby.

Curious what everyone has setup on their mouse/game settings for the smoothest controllable setup? I currently use the G502.

XIM APEX Discussions / Re: MW4 native mk > xim
« on: 06:47 PM - 09/12/19 »
Native MK support on MW4 feels amazing. You have full control over keybindings, sensitivity , etc ... basically the same custumization options as on pc. TBH the translation feels exceptionally and couldn't be better (except the v sync input lag). That's really impressive imo. You should definitely check it out !

curious about what your mouse settings are for this game

Game Support / Re: H1Z1 ST
« on: 03:48 PM - 07/17/18 »
Been tweaking around with it a lot and as long as i'm using linear ingame it just feels horrible.
Aim Assist kicks in and holds your aim in place even when theyre moving out of it (anti aa curves dont help).
Micro movements feel very slow unless you crank sensitivity too high.
Decided to switch to Exponential ingame and it feels a lot smoother and faster. Added a small acceleration curve for both hip and ads to deal with Aim Assist.
I just feel like the linear setting ingame makes aiming really bad.

Can we get them curves you are using

Game Support / Re: H1Z1 Settings
« on: 03:03 PM - 06/01/18 »
Decided to share which settings I like so far.

ST: Overwatch
- No Changes

Xim Apex Polling: 1000hz

Mouse: G502
DPI: 12000
Polling: 1000hz

-In-Game Settings:
Controller Sensitivity: 100%
Scoped Controller Sensitivity: 80% (could be a lil higher)
Aimed Controller Sensitivity: 60%
Vehicle Camera Sensitivity: 60%


Nevermind, figured it out.

Pages: [1] 2 3