XIM Community

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - nickstudy

Pages: [1] 2 3 4
1
I got in the beta a while back and they are doing an open beta tommorow. If you loved Quake 3, well it's back. Great thing is that ID software hosts the client and you play it through your browser, so hacking should be extremely limited if non existent (hopefully) so I am happy about that.

The site has been updating in the last few days so it may or may not work right away.

Basically you can play full screen or windowed, and it's just like playing Q3 back in the day. There is also a skill placement tool - You play a practice match against a bot (Crash, who is actually challenging sometimes) and depending on how you score will place skill number on you. The list of servers will come up and recommend you what is best for your area. I have been rolling with 30-50ms ping on all of them so it's awesome.

Yes, the land of the flick shot is back! I played a rail game and it was so fun to just jump around like a maniac and then 'flick' at someones face and get a frag. Although I am not as quick as I used to be (33 now!) I was able to still snatch 1st every once and a while although I have been snatching mostly 2nd to 4th (on 8 and 16 player matches) and I am getting better.

The best part? You don't need a killer rig to play it either, I tested it on my old laptop which is a 1.5 centrino with 512 ram. I was able to play maxed out on visuals and get 60fps at least (I don't know what the lock is but it's really smooth) so its great.

http://beta.quakelive.com/


So if you looking for frag fest and some great games, check out quake live. Quad Damage FTW!

2
XIM 1 Discussions / Xpadder works with Xim 1?
« on: 04:43 PM - 02/10/09 »
I got a silly question, I am going to test this later this week. My friend wants a CCU but doesn't have a Xim 360 as of yet so wants to use his Xim 1 for a bit longer. I can just use Xpadder assign the keys for whatever I want and then fire up Xim and be on my way? Once I can confirm that, I'll pass along info to my buddy so he can get in some gaming goodness with the CCU.


So does it work?

3

Ximdeadzoner seems to read in the 8000's for deadzone. I have tried 8000 through 9200 and I think it's tightest somewhere around 8850

In Game settings sensitivity slide all the way to the right. Also make sure to turn off snap aiming, otherwise when you go to pull up iron sights it will auto aim for you, which sucks.

Also, I have started on the high side of translation exponent, which seems to work out better than my normal .30 to .40 translation. The quickness of it is nice and as long as you keep a careful eye on the primary / secondary sens it should be glorious.

DPI 1800 MX 518

Update Rate is 55

DeadZone=8550
DeadZoneType=Square
YXRatio=2.0
TranslationExponent=.75
SensitivityPrimary=800
SensitivitySecondary=800
SensitivityToggle=MouseRight
DiagonalDampen=.20
Smoothness=.20


I literally started my GOW 2 config, and changed deadzone and lowered pri and secondary sensitivities.

I will revisit this again, but I tell you what I got to the part where there are snipers and I had no problem diagonally looking and busting PERFECT headshots.

This config and this game work EXCELLENT. This game uses very very little acceleration Ala' COD 4. This is awesome. I know I can get this tighter and I will when the game is released.

I would say this game is as easy to configure as COD 4, with some minor setbacks. Number one, they (dev) used a square DZ, which doesn't seem to hurt anything, but I dislike it.

Also, for those who are wondering, I would rank this game in the list as follows for ease of configuring and playability

COD 4
Fear 2
Halo 3
Gears of War 2

The above are good to excellent (COD 4 and Fear 2 are excellent, Halo 3 and GOW 2 are good) these below are Average and below

Gears of War #1
Rainbow Six Vegas 1 and 2
Far Cry 2
Turok
Dead Space

That's my 2 cents on it while I had it on my mind.


4
XIM 1 Discussions / Anyone using a Saitek CCU with Xim 1?
« on: 04:56 PM - 01/20/09 »
Just curious if anyone using a CCU with the xim 1. My friend wants to get one due to his HIGH jealousy of my command unit and he wants to get one. I was just wondering if someone did, could they post how they got the joystick mapped for AWSD and the keylayouts? I haven't attempted it yet, but figure why re invent the wheel!

Thanks.

5
Hey everyone, been sometime since I posted a config and after trying various configs out from other people I couldn't hang with it. So I started from scratch, although I only tweaked for an hour and a half.

Ximdeadzoner seems to read in the 9000's for deadzone. I have tried 8000 through 10000 and I think it's tightest somewhere in the middle.

01-26-08 - changes, dumped sens down on pri and secondary. This config can be nearly as fast or slow as you want it.

In Game settings HIGH (all of them)

DPI 1800 MX 518

Update Rate is 55

DeadZone=9700
DeadZoneType=Square
YXRatio=2.0
TranslationExponent=.75
SensitivityPrimary=1200
SensitivitySecondary=1500
SensitivityToggle=MouseRight
DiagonalDampen=.25
Smoothness=.30

I just started yesterday, tweaked for almost hour and a half or so then played with this config for over 9 hours.

One thing people will notice is the high translation exponent, this is a breakaway from my other configs where I usually stay in the .30 to .40 range. For some reason and this is no joke I loaded a default config from Obsiv and forgot about the translation exponent. I originally had it at .37 but wanted to try .75. Once I got it set, I went in game and then started going nuts with Horde.

Take note with GOW 2: At first, the feel of the game is not as tight as COD 4. Over a course of an hour or 2 you get "tuned in" on the config and don't really notice much anymore. I was able to track running targets and get headshots with this config no problem.

I am also using this config with the Saitek CCU which is the most awesome device ever concieved by a breathing organism.

Try it out, let me know. If you got something better, share the love!

6
Hey people, I finally got the saitek CCU out of it's box (been sitting there for I don't know, 5 months maybe?) and I am messing around with the SST software. I have a couple of questions.

I want to use it on my PC, and eventually start using it on Xim 360.

How the HELL do I get that stupid mini stick to work? I see settings like "bands" "Directional Axis" etc etc. In the manual I see they have a drop down for "8 way" which I don't have. Could someone that has it working in place of a AWSD set up send me a profile? Pm me and I'll give you email addy.


I want to understand how the hell to set it up, I see the RED GREEN and YELLOW settings, Green is supposedly the default FPS set up. I have tried various games and only game that I had any luck with was Counter Strike Source and I don't remember what I did. It saw joystick when I moved directions and all the buttons. Now I cannot get it to work again.

I have spent a couple hours with it and feel that I think this thing is from outer space.


Thanks!



7
General Discussion / New PC Build *updated* 11-03-08
« on: 04:50 PM - 10/30/08 »
I had to updated a few things. #1, I had to RMA the SSD drive and I just got a refund for it. I am going to wait until I can get a 128GB or better for 100ish $. My raid 0 array will hold me over until then. I also went with different ram this time (again) some G. Skill 2x2GB (4GB total) ddr3 2000 that I ended up OC'ing to almost 2200 (It's got a lot of room, I just didn't have time to get timings right).

It works with 790I EVGA board (FTW) even though Evga's website doesn't list it as an option. This is due to it was just released mid october, so maybe they have not updated yet? Bastards.

here is link to that ram
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231218

As you can see they have some wierd @#$% alien looking heatpipe sink thing, it keeps them cool. I took off spreaders and they rose by nearly 13C, I put it back on and it went down again. The fans when they are on take another 4 to 8 C off so that was nice. Not just a silly looking gimmick. Nice to know.
I just built my new machine with the following specs:

 
Evga GTX280 in SLI (I am using 2, I could do TRI SLI, but I am not going to)
Evga 790i FTW motherboard
4 gigs G/ Skill ddr3 2000 ram (Oc'd @ 2130ish)

I also picked up the Yorkfield 2.83 Quad core Q9550. Just on Air, I got this bizzle to 3.7 stable on prime95 for over 24 hours now @ 58C Load, only on air too.

The GTX280s I got for 329.99 a piece, a STEAL. I found them at FRY's electronics. For whatever reason, I bought the 2 and I was like "here comes the 950 dollar kick in the nuts" and they rang up as "GTX260 SKUXXXXXX 329.99 SSC" I know that tag, it's for the super clocked version of the GTX260, but I got 280's? Well, I just hope these never fail cuz If I have to return them that will suck a big donkey BEEP as I will surely get 260's back hah.

Here is a break down of SLI 260's vs SLI 280's vs single 260s and 280's. After getting home looking this up, if I didn't get this crazy price for these cards, I would have just brought them back and did the GTX260SLI as there is only a 3 frame diff @ 1920x1200 on VERY high.

http://www.hardware-infos.com/bild.php?bild_datei=img/startseite/gtx280_sli_performance_results.gif&bild_name=Nvidia+Geforce+GTX+SLI-Performance-Ergebnisse

So my verdict is if you thinking of doing SLI do it with the gtx 260's not the 280's as it's just as good (yes, it is I know 8FPS diff but for 400+ more bucks? NO) as the 280's. I got lucky, but not everyone else will.

Anyway, though I share my happiness with a new gaming rig, been eyeballing it for a while. I figured this will hold me over until the I7 cpu's come out and I can see what the X58 chipset is going to do for benchmarks.


8
v20 10-30-08.

@#$%! It's version 20 already. Sure, I have 108 configs in my directory, but only a handful made it out the gate. I still have a listing of configs A through I for people to use as you may get a  different feel.

However, I believe this is 80% to where I want it. I had to build a config around the look acceleration curve that is experienced.

Config J
Mouse DPI 1800 dpi (mx518)
In game settings - all the way to the right
InputUpdateFrequency=53
AutoAnalogDisconnect=False
Binding=Mouse
DeadZone=10000
DeadZoneType=Square
YXRatio=1.5
TranslationExponent=.48
SensitivityPrimary=3300
SensitivitySecondary=4000
SensitivityToggle=MouseRight
DiagonalDampen=.15
Smooth=.50

The main issue I have been having is sight lurch (jumps a bit when looking too fast) while shooting from the hip. Basically, you move your mouse to the right then speed up just a bit then it jumps forward by a ton. Here is the key

Adjust the primary sensitivity. If you go to low, the mouse will move SLOW then JUMP when you go to fast. As you start increasing you will notice this happens less and less. Once you can turn side to side with minimal sight lurch (there will always be a little bit) you know you are close.

Adjust the Secondary sens. This is the same as above, the main issue you will notice is trying to "track" a moving target. Since I snipe 95% of the time, I predict where the target will run and line up my shot to take it as they run by. This helps out alot, but no in close quarters. In that case, you need to make sure that you can track decently.

Find a couple of trees a few meters apart, and try to shoot at each one accurately by going back and forth, for more fun add more trees or rocks or zebra (if you are into killing animals, I leave them alone hehe). If you can track and accurately shoot each object without much issue, I would say you are close to good.

Can it get better? YES, This game has gone from severely pissing me off as I could not get a config to work with it, to sheer joy as I get it dialed in. There is a learning curve to using Far Cry 2 configs, but you learn to dial it in and how to make it work. That's what I am doing now.

maybe with Obsiv's Ximtweak, there will be even more oppurtunity to make this config even sweeter. If He adds more knobs, and seperates the knobs with toggles, diff XY settings etc, I *Might* be able to make this game god.


Only time will tell grasshopper, only time will tell.

==End of 10-30-08 update======


Config I


Mouse DPI 1800 dpi (mx518)
In game settings 3/4 way up.
InputUpdateFrequency=45
AutoAnalogDisconnect=False
Binding=Mouse
DeadZone=10000 (Leave it at 10000, if it works for you at 11600 then use that or anything close to it)
DeadZoneType=Square
YXRatio=2
TranslationExponent=.40
SensitivityPrimary=4000
SensitivitySecondary=4000
SensitivityToggle=MouseRight
DiagonalDampen=.15
Smooth=.15 to 1.0 (I am using 1 right now, since this game feels heavy already, the smooth I really can't feel)




Test out the configs, let me know which one you like (IE A, B, C , D , E , F , G so on and so forth) make sure to let me know what in game setting you are using (ie 3 from the left, max, lowest etc) and the DPI you are using. Let's see how good it can get.

Some other notes: I have started noticing that it's easier to control this beast if you lower the in game settings to middle or lower. The max settings seem to just yield un controllable BS that I have not figured out how to tame as of yet. However that may be, please please try them out and tell me what you figured out. It's getting better and I know some of these configs may feel progressively better, then get worse and better again. They are not really in order, I just named them so I could track progress. I have a dozen more, but these I feel are the core configs which I am basing future testing off of. Of course this could easily change as I stumble onto another amazing discovery (haha) that leads me to a COD 4esque type config....I wish!

Config A

Mouse:1800 dpi
InputUpdateFrequency=55
AutoAnalogDisconnect=False
DeadZone=10000
DeadZoneType=Square
YXRatio=2
TranslationExponent=.36
SensitivityPrimary=5000
SensitivitySecondary=8000
SensitivityToggle=MouseRight
DiagonalDampen=.15
Smoothness=.15


B config

InputUpdateFrequency=50
AutoAnalogDisconnect=False
DeadZone=10000
DeadZoneType=Square
YXRatio=2
TranslationExponent=.33
SensitivityPrimary=5500
SensitivitySecondary=7000
SensitivityToggle=MouseRight
DiagonalDampen=0
Smoothness=.15




Config C

In game settings 2nd from the left (Yes, that's right almost the lowest you can go)

Mouse: 1800dpi
InputUpdateFrequency=55
AutoAnalogDisconnect=False
DeadZone=10000
DeadZoneType=Square
YXRatio=2
TranslationExponent=.30
SensitivityPrimary=8000
SensitivitySecondary=8000
SensitivityToggle=MouseRight
DiagonalDampen=.15
Smoothness=.15


config D

In game settings in the lower range, around 3 to 5 from the left

Mouse DPI 1800
DeadZone=10250
DeadZoneType=Square
YXRatio=2
TranslationExponent=.32
SensitivityPrimary=8000
SensitivitySecondary=10000
SensitivityToggle=MouseRight
DiagonalDampen=.20
Smoothness=.15

Config E (Test)

In game settings, variable try middle then high then low. Does this config zig zag for anyone? It does for me, and it's touchy - but not always? Also I squashed the XY ratio as a test. Basic settings are staying the same, I am having better luck with lower translation expo's as opposed to turning them up as it results in CHAOS. Unless I can tame it some how, it's still a hard challenge.

DeadZone=11600
DeadZoneType=Square
YXRatio=1.25
TranslationExponent=.30
SensitivityPrimary=8000
SensitivitySecondary=10000
SensitivityToggle=MouseRight
DiagonalDampen=.20
Smoothness=.15

Config F
In game settings, low, around 1 to 4 from the left. This config I used 2 from the left. More precise, but slower too. I am not sure you can have it all ...yet.

Mouse DPI 800 to 1800
Update freq: 53
DeadZone=10000
DeadZoneType=Square
YXRatio=2
TranslationExponent=.36
SensitivityPrimary=5000
SensitivitySecondary=8000
SensitivityToggle=MouseRight
DiagonalDampen=.15
Smoothness=.15


Config G

This one I am using about Half way to 3/4 in game setting. I set translation expo at .40 and both primary and secondary sens the same. It seems that both iron sights and hip are same speed, not sure completely but that is my experience with it.

Also lowered update freq to 45.

Mouse DPI - 1800
InputUpdateFrequency=45
AutoAnalogDisconnect=False
DeadZone=10000
DeadZoneType=Square
YXRatio=2
TranslationExponent=.40
SensitivityPrimary=4000
SensitivitySecondary=4001
SensitivityToggle=MouseRight
DiagonalDampen=.15
Smoothness=1


Config H

In game settings, 70 to 100%

Mouse DPI - 1800
InputUpdateFrequency=45
AutoAnalogDisconnect=False
Binding=Mouse
DeadZone=10150
DeadZoneType=Square
YXRatio=2
TranslationExponent=.60
SensitivityPrimary=2000
SensitivitySecondary=2000
SensitivityToggle=MouseRight
DiagonalDampen=.15
Smooth .30


==So there you have it, a bunch of ready to wear configs, let me know which ones you like and which ones you feel are closer to a good config. It's all starting to blur for me , need some new eyes on this.





Notes: I posted this config, as so far it seems there is no perfect setting for this game. It presents many challenges. For starters, the sensitivity does go high, but has this slow start then speeds up FAST to reach top acceleration. This is a bad thing as using a Mouse will have you slow starting then speeding up too much.

How do you fight this, well it's tricky. I have bounced back and forth with in game settings, starting maxed out and backing off to half way and then trying 3/4 (which I am using currently). You have to realize that the in game settings and features are working against what Xim 360 is trying to get.

Regarding the large deadzone: This game has a huge deadzone. I used Ximdeadzoner and pegged it at 11600. However on several tests It could vary, but 11600 is a solid reading. The issue is I cannot use that size. Why? Zig zagging, when looking up and down it goes up and on the way down goes a perfect 45 degree angle, making it very difficult to play. I had to back off all the way down to 10000 to get it to settle down. 10500 works sometimes, but not always. I want others to try this and tell me if you experience same thing. I have considered re enabling analog sticks (I am using autoanolog disconnect setting) and see if that helps.

So now what? Well, you may be sad at this news but I got good news for you. It's totally playable, you just have to be careful and not swing wildly or you will be looking quickly and overshooting your targets. The trick is this game works MUCH better when using iron sights, than shooting from the hip. I say much better, as it's still not awesome, or anywhere near COD 4 or even Halo 3 settings. It can be playable, it's just a pain and you have to pick accuracy and slowness, or speediness and inaccuracy - making you fall in the middle.

This config I could describe as:

Semi accurate in from the hip, more accurate in the iron sights but slower. Attention must be paid to turning to fast or you will overshoot your target.

Final thoughts, at least the good news is this is my first pass with this game. I spent nearly an hour with it. It can only get better. How much better? I feel it has another 20-30% improvement left, which I feel is realistic. I won't say I can make the perfect config on this as I feel no one can. Not stroking ego here, just being realistic. You can tell right away if a game is going to work good for you by picking up controller first, set in game settings to max and then turn left and right and see how long it takes to get to full speed. Cod 4 is a great example, I wish EVERY game used that setting. I would be so happy, but that is not the case here and it is what it is.

I'll be updating this tommorow as it is my game day. I'll post another config and update this one too. What I may do is post a few configs as a list and you can pick and choose. I have been thinking of breaking configs out into "commando" "sniping" "spray and pray" types. Different settings and what not. Been thinking about it, but been busy.

Stay tuned and good luck. If you can make this game feel like COD 4, I will be your best friend.




Release notes:

Beta V1 released 10-24-08

Beta V16 released 10-25-08 What happened to v 2 through 15? That's a good question. I was too deep in testing to track the progress, so I skipped making notes. Released Configs A through F for community testing, tracking progress to see which ones come out on top.

Beta v17 released, added configs G and H. Different translation expos, and different in game settings make it more playable.

10-29-08 Released Config J, increased translation decreased smooth and modified diagonal expo....This config is starting to feel pretty good.

9
General Discussion / Build it yourself if they cannot!
« on: 05:28 PM - 10/20/08 »
I posted on another thread about some 550's headphones, then I went on to say how I seriously dislike ALL headphones that are currently 5.1

A40's. Astro gamings so called elite headphones.
Turtle beach (Ear force HPAs, and other crap from them)
Smyth research (another joke, 2 speaker headpohones giving up to 7.1 surround sound - bunch of BS)
SRS - another virtual POS. Using some fancy algorithm that does what the Smyth's do, another load of crap and marketing ploy.
Silent Cinama - YAmahas's entry into this surround sound headphones, using regular stereo headphones, tried it and it's craptastic like the XFPS.


The problem is the close proximity of speakers that don't allow the spatial sound to develop. It's really a sad state of affairs for surround sound headphones. Some ideot named Ben heck made a pair and now sells them, I bought his and then wrote him back that he should consider a new line of work as those headphones are garbage.

I am ranting here, but it's for good reason. I am willing to settle for a pair of cans having a decent sound to them, I won't hate. The A40's "sound" good, but the positioning is just CRAP. As I have said elsewhere, I decided to build my own as I cannot find a pair I like. Either I am too picky, or people don't understand how sound works. I am biased though I admit as I am in the development arena for sound systems for speakerless sound systems, and surround systems (I have a start up with 2 partners, which will remain unamed until the day I can produce something worth showing) and have a great in depth knowlege of sound and science behind it. It pisses me off when astro gaming charges that much for something and offers crap. Sure you can daisy chain headsets together for comm channels, mix voice and sound together using a fancy knob. Big deal! If they would have put the effort into spacing out the speakers and chambering the sound correctly, I would be a big fan. But like all other companies out there, they did it the wrong way and I am pissed.

You want to know who the people and team I am not mad at? OBsiv, Derek the the Xim product. They are totally NOT pissing me off, which is why am so god @#$% passionate about the Xim 360 project, and I really have adopted alot of Obsiv passion into my own projects as like him I got tired with INFERIOR solutions to which I am seeking, so I have to build them myself.


Agony at it's finest.


10
10-20-08


*UPDATE* Well, I found out this game has only ONE sensitivity. You cannot change it, you cannot adjust it you cannot mess around with it. One speed only! Arrrrgh!

I have not posted the settings yet, but after playing the game you realize this is one game you can play with the controller. Why? Headshots are meaningless, in this game it's about dismemberment of the creatures by using laser cutters, hand tools, fists, feet to curb stomp, bash or generally kill everything with your hands, tools or other methods. I have found this game is actually a joy to play with a controller as it really doesn't require precise aiming at all.

With that said, I did cook up a config I tested it tonight. I am going to "sleep on it" then post it up tommorow night or wed morning - just to make sure I am happy with it.

Stay tuned!


Tv/Monitor Size=46"
Tv/Monitor Resolution=1920x1080P
Tv/Monitor Refresh Rate=60
Ingame Setting=
Mouse=Mx518
DPI=
Updaterate=DeadZone=
DeadZoneType=
YXRatio=
TranslationExponent=
SensitivityPrimary=
SensitivitySecondary=
DiagonalDampen=
Smoothness=

11
Tv/Monitor Size=46"
Tv/Monitor Resolution=1920x1080P
Tv/Monitor Refresh Rate=60
Ingame Setting=Custom setting 10,
Mouse=Mx518
DPI=1800
Updaterate=55
DeadZone=6695
DeadZoneType=Circular
YXRatio=2.0
TranslationExponent=.36
SensitivityPrimary=3000
SensitivitySecondary=4000
DiagonalDampen=.10
Smoothness=.10


Here is a beta config that is fresh out of the pot. If you ask yourself "This looks ALOT like your COD 4 config" you would be right. There are some minor adjustments, and I only have 40ish minutes playing with this config online. Basically what I did is I loaded up my COD 4 config, and started playing. It was nearly identical in terms of feel and gameplay, so I didn't change much.

I will be doing a total workup test cycle and this config will change. Going to start with the ground up approach and see what happens. Since this game's feel is nearly identical, maybe the changes I make will bleed over to my other COD 4 config.


12
I am putting this thread here as a way of notification to others who want to play together. I have had great luck getting people on now that people are getting the xim360 so it's been good to play.

Just post here if you are going to be on tonight. This goes for ANY night, not just tonight which I know is 10-09-08, but this could be later on so just post here if you are going to be on and what time and what time zone that is in.

Hell if we get too many, we can do private games too and as each game goes on balance the teams out based on points kills and all that. That's beside the point though. Just post if you are getting on and others can hit you up. Also add GT too

so to make this message even longer

When you are getting on (ie tonight at  9pm pac time)
Gamer tag

Other useless comments you want to add, like how and WHY this monkey wants to do THIS to himself.
http://www.stupidvideos.com/video/animals/Monkey_Juice/

You can only comment if you are getting on tonight, otherwise I will fight you and that's no lie. I have Many leatherbound books, my study smells of rich mahogony.

13
WELL. It seems all my fancy pants talk about uber and his RROD has lead my Xbox360 to give me the bird. I'll give M$ a call on this, but now I will vent so if you have something to add, go ahead and add it.

My Xbox is acting mighty strange. If I take the HD out, works fine - of course I can't sign in or anything else. I put it back in, it freezes up within 10 to 15 seconds (gets to dashboard, then stops responding). Take out HD, works again, turn off turn on works fine. Put HD back in freezes. No lights that are red, nothing like that. Read that if a light was red (lower right quadrant) that would mean HD is out. But I don't even get that.

Anyone had this wierd issue? I am wondering, am I completely }=U<K3D? I have all the map packs for H3, and COD4, plus doom,and a bunch of other games (SFII Hyper fighting, duke nukem, some xbox original downloads etc etc etc). Can they see my account and show that I own those games and let me download them again. I know STEAM does that, I go to a new computer and I sign in and it lets me DL all that content to another computer.

I might make trip to best buy, or walmart get a HD and try it out, if it works then that would be nice.

@#$% M$ really pissing me off, If I have to go through this crap one more time I am going to start unleashing one MILLION bunnies with rabies to go bite the ENTIRE employee line and have those infected bunnies latch on to the NUTS and to the coochie for messing with my precious pwning machine.

Seriously, they make me mad.




================================FLASH UPDATED 10-09-08++++++++++++++++++++++++++++++++++

I fixed this issue myself. Here's what I figured out.

360 with no HD works fine.
360 with HD  freezes.
Disabled sign on automatically to see if it was a profile.
Signed on with mine ii TR00F ii, BAM it freezes.
Signed on with wifes account, works fine.
Deleted profile only (not the content with it, just the profile.)
Recovered gamertag - DL GT settings.
Back to pwning and putting this behind me.

YAY FTW!

14
Xbox / COD 5 World At War
« on: 08:02 AM - 10/04/08 »
http://xbox360.ign.com/articles/900/900160p1.html

I have barely read anything about this game. I finally looked at some videos ( I saw something before, but wasn't really paying attention).

A few things I am excited about

Based on the COD4 engine, hopefully - they don't mess with the controls and LEAVE THEM THE HELL ALONE. Otherwise I will send sparky after them to bite them in the gonads.

CO OP - that is pretty dope fly. I am really going to dig that, about time!

COD4 Engine, with COD2 gameplay - I always wanted to play COD2 on the xbox360. I had a TON of time playing on the pc online in clans, tourneys, big @#$% lans and everything else. I want to capture a small slice of that play back.

Only thing I am concerned about is when that comes out the population is going to drop from cod4 to play cod5. As excited I am about this game seems so soon to be coming out with another COD when Cod 4 already has 120k players online all the time at all hours of the day. I wonder who's sticking around, and whos gonna play Cod5.

I will play both, naturally because I believe the perks on cod5, if there are any are not including red dots and everything since it is wwII era hehe.

It's 6am in the morning and I am excited, I just got up and now I am about to embark on a marathon session of Cod 4 for the day for the next 10 to 12 hours. Yay for monster energy drink.


I can't seem to locate the multiplayer specs on size, etc what maps and all that. All I see is 1 to 4 players, I assume that is the co op spec and not the MP aspect of the game. Hmm?

15
XIM 2 Discussions / New Tutorial
« on: 05:19 PM - 09/17/08 »
For those with some time on your hands. Also has a quick start guide for those who have no patience and just want to play. Let me know of any issues or corrections etc as it is still in that ever changing draft phase.
http://xim3.com/community/index.php?topic=1069.0

Pages: [1] 2 3 4